• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.4
• /
• pp.301-308
• /
• 2006

Today's automobiles are changing into miniaturization and light weight for saving natural resources and energies. In order to raise the sufficiency of fuel consumption, new mechanism and components are required. Therefore, the expectations on the new materials are very high. Especially, Al materials are widely used to reduce the motors weight. Al using in automobiles is mostly casting material, and the material is developing rapidly in step with technical innovation. Al die casting has become an important field, as we are turning today's motor into light weight. One of the parts in steering system, valve housing, plays a role to reduce the operating effort of drivers. If valve housing being a part of steering system is produced by gravity casting, the space that manufacturing equipments are installed will be increased, and more energies and workers will be needed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.5
• /
• pp.261-268
• /
• 2013

Technologies for preventing contaminants deposition are a key issue in a modern duct system. When particulate matters deposit inside the exhaust pipes, which are widely used in the Urea-SCR system to reduce $NO_x$ emission from heavy duty diesel engines, many problems arise associated with increased flow resistance and corrosion. Therefore, the development of the urea deposition avoidance technologies is being treated as an important issue of the Urea-SCR system. An analytical study was carried out to investigate the effects of the wall flow around the mixer with the variation of the mixer housing surrounding and supporting the mixer, which is designed to increase the wall flow and then to reduce droplet deposition. The housing angles and the position of the mixer were changed：angles of $0^{\circ}$, $1^{\circ}$, $2^{\circ}$, and $3^{\circ}$, and mixer positions of 0 L, 0.5 L, and 1 L. The axial velocity distributions, maximum velocity, the half-width, and momentum distribution of the wall flow were investigated to examine the effect of the mixer-housing assembly geometry.

• Journal of the Korean housing association
• /
• v.25 no.4
• /
• pp.83-91
• /
• 2014

The purpose of this study is to clarify the characteristics between the type of daily routine and spatial configuration of activity areas in classroom and provide alternatives for space planning of activity areas in classroom of child-care centers. This study used the content analysis on daily activity plan and floor plans through field survey. Analysis on floor plans was conducted for 35 classrooms in 9 child-care centers which allowed field survey. The results of this study were as follows; There was no significant difference for classroom size according to the type of daily routine in 3 to 5-year-old classrooms. The average size of classrooms was $61.6m^2$ for care oriented type, $41.4m^2$ for indoor activity oriented type and $48.8m^2$ for group activity oriented type. There was no significant difference in composition of activity areas in classrooms according to the type of daily routine. In case of 0 to 2-year-old classrooms, they were composed of 6 activity areas including gross-motor, role play, block building, language, creative expression, exploration/manipulation. Activity area of the most low frequency was gross-motor area. In case of 3 to 5-year-old classrooms, most classrooms were composed of all the 7 activity areas including art, tone and rhythmic, block building, role play, language, math and science. Most accessible and central areas in 0 to 2-year-old classrooms were gross-motor and role play. Also, most separate areas were exploration/manipulation and block building. Most accessible and central areas in 3 to 5-year-old classroom were art and math. Also, most separate areas were tone and rhythmic and science.

• IE interfaces
• /
• v.21 no.1
• /
• pp.43-50
• /
• 2008

Understanding consumers' latent desires for product form has now become a critical issue in product design. Accordingly, product development processes is rapidly changing from product-oriented development to user-centered development. Driver visibility is considered as an important element of driving posture packaging in automobile interior design. This study presents a systematic process for driver visibility analysis approached from affective engineering method that provides design variable selection and screening with respect to the image/impression element of the human visibility. Also, the analysis of front visibility, often called the feeling of "openness", in motor vehicle interior design, is selected and practiced a case study using the systematic process proposed in this study. Twenty six participants evaluated the feeling of openness for thirty motor vehicles following the perceived scale of affective design factors. The results showed that variables such as the height of head lining, the height of cluster housing, the gradient of windshield and the volume of A-pillar were the critical design variables which affect the feeling of openness in a motor vehicle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1441-1446
• /
• 2012

An axial-piston-type hydraulic motor involves friction and leakage losses at the sliding parts, contact loss at the mechanism assembly parts, volumetric loss caused by the pressure drop, housing oil churning loss and compressibility from the hydraulic oil pipe resistance, etc. the friction and volumetric loss at the hydrostatic bearing between the piston shoe and the swash plate rotating at high speed and having an oil film gap of 8-15 ${\mu}m$ strongly affects the total efficiency of the hydraulic motor. In this study, a variable swash-plate-type hydraulic piston motor operating under a maximum pressure of 35 MPa, maximum speed of 2,500 rpm, and displacement of 320 cc/rev is tested to verify the optimal ratio of the hydrostatic bearing which is closely related to the hydraulic motor performance.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.8 no.2
• /
• pp.47-56
• /
• 2008

The purpose of this study is to arrange the design elements and methods for sustainable community. After made the concept of sustainable community clear in the contemporary architecture and urban design, this study examines rural ecovillage, urban demonstration project, co-housing, new urbanism and urban village, and ecological township as the application modes of sustainable community. Through the cases of the application mode, the design elements for sustainable community were summarized as the followings: the symbiosis system with the nature, permaculture and edible landscape, identity, the technology for saving of resources and energy, the traffic system for the reduction of private motor use, mixed use development, and the housing with diversity. And the design methods for sustainable community were summarized as the followings: strategic planning, visioning, community action planning, workshops and charrette, environmental evaluation, and participation techniques.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.8
• /
• pp.1195-1200
• /
• 2017

The aspect of vibration is analyzed according to the structural length difference of IPMSM housing. For this purpose, the frequencies that have the greatest influence on the RMF were analyzed using electromagnetic analysis result. And the change of resonance frequency was analyzed through structural analysis. The vibration experiment was also performed. Compared with the analysis result, it was verified whether it is the actual aspect and validity result.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.195-204
• /
• 2000

The finite element analysis (FEA) is widely used in modern structural dynamics because the performance of structure can be predicted in early stage. However, due to the difficulty in determination of various uncertain parameters, it is not easy to obtain a reliable finite element model. To overcome these difficulties, a updating program of FE model is developed by consisting of pretest, correlation and update. In correlation, it calculates modal assurance criteria, cross orthogonality, mixed orthogonality and coordinate modal assurance criteria. For the model updating, the continuum sensitivity analysis and design optimization tool(DOT) are used. The SENSUP program is developed for model updating giving physical parameter sensitivity. The developed program is applied to practical examples such as the BLDC spindle motor of HDD, and upper housing of induction motor. And the sensor placement for the square plate is compared using several methods.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.129-138
• /
• 2001

The paper presents an implementation procedure of assembly line for ABS motor, which is composed of four subassemblies-yoke, grommet, housing and armature. The characteristics of ABS motor and its assembly processes are analysed, and the automation possibility of each process is examined in order to decrease assembly time. The assembly machines and facilities are then selected for automatic assembly, and the layout of the selected facilities is determined. Finally, task allocation of each worker is achieved by assembly line balancing to increase assembly productivity and efficiency. The line efficiency is also analyzed using simulation.

• Journal of Ginseng Research
• /
• v.14 no.2
• /
• pp.171-177
• /
• 1990

Using an ethopharmacological technique, we demonstrated that saponin fraction from red ginseng root possessed a potent psychotropic actions on either intermale or maternal aggression models. A series of experiments clearly indicated that one of psychoactive ingredient is ginsenoside Rbl. Although a drug-induced debilitation of motor performance remains a possible cause of the antiaggressive affect of the drug. ginsenoside Rbl did not alter the locomotor activity of the mice during agonistic confrontations. Thus. one can eliminate the possibility that the psychotropic effect of ginsenoside Rbl might be concealed by a drug-induced impairment of motor performance. More recently, we developed a nevi model for copulatory disorder and introduced into the behavioral analysis of drug action. Male mice which has been housed individually from weaning for 5 weeks failed to manifest copulatory behavior when they encountered with the sexually receptive females. Daily administration of crude ginseng saponin during isolation housing period prevented the development of copulatory disorder, whereas both ginsenoside Rbl and Rgl were ineffective. A further experiment may be needed to explore active ingredient of ginseng saponins.