• 센서학회지
• /
• 제26권2호
• /
• pp.128-134
• /
• 2017

Until now, neuropsychological tests can diagnose the brain dysfunction, however, cannot distinguish the objective data of experiment enough to distinguish the relationships between brain dysfunction and cerebropathia. In this paper, an automatic cognitive test equipment system with 6-axis motion sensors was proposed for the automation of neuropsychological tests. Fist-Edge-Palm(FEP) test and Go-no go test were used to evaluate motor programming of frontal lobe. The motion data from the specially designed motion glove are transmitted wirelessly to a computer to detect the gestures automatically. The healthy 20 and 11 persons are investigated for the FEP and Go-No go test, respectively. The recognition rates of gestures of FEP and Go-No go test are min. 91.38% and 89.09%. In conclusion, the automations of cognitive tests are successful to diagnose the brain diagnostics quantitatively.

• 통합자연과학논문집
• /
• 제12권4호
• /
• pp.105-115
• /
• 2019

In this paper, a prediction system is proposed to control the brightness of smart street lamps by predicting the moving path through the reduction of consumption power and information of pedestrian's past moving direction while meeting the function of existing smart street lamps. The brightness of smart street lamps is adjusted by utilizing the walk tracking vector and soft hand-off characteristics obtained through the motion sensing sensor of smart street lamps. In addition, the motion vector is used to analyze and predict the pedestrian path, and the GPU is used for high-speed computation. Pedestrians were detected using adaptive Gaussian mixing, weighted difference imaging, and motion vectors, and motions of pedestrians were analyzed using the extracted motion vectors. The preprocessing process using linear interpolation is performed to improve the performance of the proposed prediction system. Fuzzy prediction system and neural network prediction system are designed in parallel to improve efficiency and rough set is used for error correction.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.262-267
• /
• 2000

This paper describes a weight in motion(WIM) sensor to measure the weight of a vehicle in motion. The main sensing element of the WIM sensor is the PVDF(Polyvinylidene fluoride) film that shows rapid response to an external excitation. Due to the property of rapid response, it is possible to measure the weight of a vehicle in motion with high speed. In the development of the WIM sensor, the dominant target value was the uniformity of the sensor. To increase the uniformity, We employed shrinkable tube made of rubber to enhance the uniformity, and performed the rolling of the brass tube repeatedly. The uniformity of the sensor was examined experimentally. It was comparable to that of a WIM sensor of the MSI which was the benchmark of this development. This paper also describes the mechanical modeling of the sensor and the suitable charge amplifier for the sensor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.970-976
• /
• 2003

In this paper, we analyse and present electro-mechanical dynamic characteristics of a micro-machined vibrating silicon ring gyroscope which can measure angular velocities about three orthogonal axes. The ring gyroscope has a ring connected to the gyroscope main body by support-ligaments which are arranged with cyclic symmetry. The natural modes of its vibration can be distinguished into the in-plane motion and the out-of-plane motion which are coupled by the gyro-effect due to the notation of the gyroscope main body. The motions of the ring are electro-statically derived, sensed and balanced by electrodes. The equations of motion are formulated. The scheme of angular velocities sensing by force-to-rebalance method is presented. The dynamic characteristics of a ring gyroscope are calculated and compared.

• 로봇학회논문지
• /
• 제1권2호
• /
• pp.180-187
• /
• 2006

This paper presents a new sensor system, CALOS, for motion estimation and 3D reconstruction. The 2D laser sensor provides accurate depth information of a plane, not the whole 3D structure. On the contrary, the CCD cameras provide the projected image of whole 3D scene, not the depth of the scene. To overcome the limitations, we combine these two types of sensors, the laser sensor and the CCD cameras. We develop a motion estimation scheme appropriate for this sensor system. In the proposed scheme, the motion between two frames is estimated by using three points among the scan data and their corresponding image points, and refined by non-linear optimization. We validate the accuracy of the proposed method by 3D reconstruction using real images. The results show that the proposed system can be a practical solution for motion estimation as well as for 3D reconstruction.

• 한국지능시스템학회논문지
• /
• 제17권6호
• /
• pp.738-743
• /
• 2007

본 연구는, 팔(하완)을 잃은 장애자용 인공 의수를 장애자가 자신의 의도에 따라 제어하기 위한 센서 시스템과 제어알고리즘에 관한 것이다. 먼저 장애자의 여러 가지 동작 의도를 검출할 수 있는 센싱 시스템을 연구하고 이 센싱 시스템으로부터 발생된 신호를 사용하여 인공의수를 제어하는 방법에 대하여 연구한다. 센서로서는 전기 저항식 굽힘 센서를 사용한다. 이 굽힘 센서를 팔의 상완 이두근과 오구완근에 각각 1개씩 단단히 부착한다. 부착된 센서로부터 출력된 신호는 근육의 굴곡량을 나타내며 팔의 동작의도를 판단 할 수 있는 신호처리 시스템을 통과시켜 하완의 굴곡과 신전 운동, 손의 내전과 외전 운동을 구별한다. 그리고 구별된 신호로부터 실제 팔의 운동 각도를 추정하여 인공의수의 각도를 제어한다. 본 연구의 효용성을 증명하기 위해 2개의 액추에이터와 포텐셔미터를 가진 간단한 인공의수를 제작하여 제어 실험을 하였다. 실험에서 실제 팔의 각도와 인공의수의 제어 각도 사이에는 센서 외부에서 발생되는 노이즈 및 인공의수의 회전 관성, 기계적인 마찰 등으로 인한 오차가 발생하였다. 따라서 오차 값과 오차의 변화 값에 근거한 퍼지 제어 알고리듬을 이용하여 재 실험을 한 결과 하완의 굴곡/신전 운동에서는 평균 약 4도, 손의 회내/외 운동에서는 평균 약 3도의 오차가 측정되어, 퍼지제어기를 설치한 이전보다 오차가 크게 개선되었다.

• 전기전자학회논문지
• /
• 제14권1호
• /
• pp.17-24
• /
• 2010

본 논문에서는 LBS(Location Based Service) 응용을 위한 독거노인의 일상 활동의 칼로리 소모 예측 모델을 제안한다. 제안한 방식은 PIR (Passive InfraRed) 움직임 센서를 이용하여 독거노인의 활동 패턴을 측정하고, 물리적 활동과 그에 따른 칼로리 소모의 관계를 검토한다. 제안된 움직임 감지 시스템은 개별 노인 주택에 설치되는 센싱 시스템과 중앙 서버 시스템으로 구성된다. 센싱 시스템은 PIR 센서를 장착한 무선 센싱 노드들로 구성된 무선 센서 네트워크 형태로 구현되었고, 각 센서가 감지한 노인들의 움직임은 홈 게이트웨이를 거쳐 중앙 데이터베이스 서버로 저장된다. 서버 시스템은 데이터베이스 서버와 웹 서버로 구성되어 있으며, 웹 기반 모니터링 시스템을 통해 저장된 움직임 데이터를 가공하여 독거노인들의 수발제공자에게 각 노인들의 효율적인 서비스를 제공한다. 실험을 통해 제안한 칼로리 소모 모델의 성능과 적용 가능성을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.108.6-108
• /
• 2002

It is greatly important to understand the mechanics of AFM-based nanorobotic manipulation for efficient and reliable handling of nanoparticles. Robust motion control of an AFM-based nanorobotic manipulation is much challenging due to uncertain mechanics in tip-sample interaction dominated by surface and intermolecular force and limitations in force and visual sensing capability to observe environment. This paper investigates a nanomechanic modeling which enables simulation for AFM-based nanorobotic manipulation , and its application to motion planning of an AFM-based nanorobot. Based on the modeling of intermolecular and adhesion force in AFM-based nanomanipulation, the behaviors of an AFM ca...

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.615-619
• /
• 2000

This paper presents an implementation of digital motion control system of Surface Permanent-Magnet Synchronous Motor(SPMSM) vector drives with a direct torque control(DTC) using the 16bit DSP TMS320F240 The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent control for motors which can be yield enhanced operation fewer system components lower system cost increased efficiency and high performance The system presented are stator flux and torque observer of stator flux feedback model that inputs are current and voltage sensing of motor terminal and angle for a low speed operating area two hysteresis band controllers an optimal switching look-up table and IGBT voltage source inverter by using fully integrated control software. The developed control system are shown a good motion control response characteristic results and high performance features using 1.0Kw purposed servo drive SPMSM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1036-1038
• /
• 2000

This paper presents an implementation of digital motion control system of induction motor vector drives with a direct torque control(DTC) using the 16bit DSP TMS 320F240. The DSP controller enable enhanced real time algorithm and cost-effective design of intelligent controllers for induction motors which can be yield enhanced operation, fewer system components, lower system cost, increased efficiency and high performance. The system presented are stator flux observer of current model that inputs are current sensing of motor terminal and rotor angle, and optimal switching look-up table by using fully integrated control software. The developed system are shown a good motion control response characteristic results and high performance features using 2.2Kw general purposed induction motor.