• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.399-406
• /
• 2009

The purpose of this study was to compare the effect of wearing roller shoes and jogging shoes on kinematic characteristics in lower extremity during walking. Eight male middle school students(age: $15.0{\pm}0.0^{\circ}$ yrs, height $175.9{\pm}6.6cm$, weight: $616.3{\pm}84.9$ N) who have no musculoskeletal disorder were recruited as the subjects. Temporal parameters, step length, stride length, center of mass, velocity of CM, angle of segment, angular velocity and range of motion were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions(p < .05). The results showed that stride length and velocity of CM in wearing roller shoes were significantly less than those found in wearing jogging shoes. These indicated that walking patterns may be changed by different shoe conditions and unstable braking condition because of wheel. Angle of ankle joint at LHC1 and LHC2 in wearing roller shoes was greater than the corresponding value for wearing jogging shoes. It seems that the ankle joints are locked in an awkward fashion at the heel contact to compensate for imbalance. Otherwise, dorsi flexion was not produced at the heel contact point in wearing roller shoes.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.337-345
• /
• 2009

The purpose of this study were to find out the differences in kinematic variables of racket movement by performing the tennis serve. Three top male tennis players participated in this study. Three synchronized high-speed cameras were used to record the service action of top players for Three dimensional video analysis. The results of this study showed that (1) the velocity of the tennis racket at impact is important to the generation of racket velocity to Y-axis. This result indicates that forward motion and upward movement of the racket; (2) with respect to racket angular velocity at impact, the fast angular momentum of X-axis is important to generate the velocity of the tennis ball. This result indicate upward movement of the racket with a strong flexor of wrist joint; (3) the velocity of the tennis ball was influenced by the change of angular linking the Z-axis to -X-axis. This result indicates that the high velocity of the tennis ball is obtained from having the racket unitedly moving to the direction of the bill's flight at the acceleration interval and acquiring the distance of acceleration with the racket head vertically to the ground at the back scratching.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.115-126
• /
• 2014

Purpose : Depending on a variety of therapeutic areas using MVCT(Megavoltage computed tomography) intra-and interfraction is to evaluate changes in patient position. Materials and Methods : In this study, head and neck, thorax, liver, and prostate tumor patients, 48 people with a full course of treatment for patients with various MVCT scan was performed. Average 60 per patient MVCT images were acquired and analyzed. Results : Interfraction error thorax and abdomen, and pelvis in the longitudinal difference was more than 3 mm. Intrafraction to see a change after the end of treatment MVCT taken, and the results confirmed Intrafraction 2 mm in motion around the longitudinal difference. In addition, due to changes in the movement before and after treatment, Inter-and Intrafraction difference was found. Conclusion : In the present study, the Head and Neck, Thorax, liver, prostate cancer in patients with inter-and intrafraction changes and target the appropriate fixtures to complete the outline of the margin would be helpful is considered.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.4
• /
• pp.1006-1013
• /
• 2016

The observed external injury, movement and survival rate according to storage and recovery of the juvenile sea cucumber, Apostichopus japonicus(wet weight $1.0{\pm}0.2g$). The investigated application possibility of external injury(grade I~IV) and movement variation(buccal tentacle, motion, obversion, movement) for estimate of survival rate. The survival rate was observed through the recovery after storage of the sea cucumber in various water temperature(10, 15, 20, $25^{\circ}C$) and hours(3, 6, 12, 24 hour). Grade of external injury lower in the 24 hour experiment group of $20^{\circ}C$ water temperature and 12 hour experiment group of $25^{\circ}C$ water temperature. Buccal tentacle and movement strong related survival rate and external injury. In the case of $20^{\circ}C$ water temperature, survival rate was observed decrease 24 hours experiment. $25^{\circ}C$ water temperature was high to 6 hours but 12 hours experiment group observed decrease of the survival rate. The lethal time(LT10) of the juvenile sea cucumber was 15.73 hours($20^{\circ}C$) and 5.57 hours($25^{\circ}C$). The results of this study provided various measurement method of survival rate according to transportation of the juvenile sea cucumber for release.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.1
• /
• pp.27-34
• /
• 2009

Site amplification should be considered in order to estimate Soil-Structure Interaction (SSI), seismic source and attenuation parameters with a greater degree of reliability. The horizontal to vertical (H/V) ratio technique, originally proposed by Nakamura (1989), has been applied to analyze the surface waves in microtremor records. Recently, its application has been extended to the shear wave energy of strong motion in order to study the site transfer function. The purpose of this paper is to estimate the H/V spectral ratio using the observed data from 9 seismic stations distributed within the Southern Korean Peninsula, from the Odesan earthquake (2007/01/20). The results show that most of the stations have more stable amplification characteristics in a low frequency band than in a high frequency band. However, each seismic station showed its own characteristic resonant frequency and low and high frequency. The resonant frequency at each station should be estimated carefully, because the quality of seismic data is dependent on the resonant frequency. It can be obtained more reliable results of seismic source and attenuation parameters, if seismic ground motions which deconvolved from site transfer function is used. The site amplification data from this study can be used to generally classify the sites within the Southern Korean Peninsula.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.1
• /
• pp.47-54
• /
• 2011

The remote control mobile robot is the robot accomplishing a task according to the orders giving by a user through departed communication system using a joystick. Basically, to supply a lot of information, as this type of robot uses visual information, the user can check the transmitted information by eyes and give orders to the robot. But the weak point of this type of robot is that it has a possibility to come into a collision with an obstacle not be seen to the user because of the communication delay occurring in a communication system and dead zone happening in visual information. To solve the problem, in this paper, we try to suggest a system applying a fuzzy control system to the robot to avoid collision with an obstacle by an immediate order of the user. The fuzzy control system has better performance than any other existing control methods in the change of noise and parameter. And it is more efficient than any other since it solves easy the complexity of the system analysis occurring because of the nonlinear feature of the mobile robot system. In this paper, we made experiments how the mobile robot controlled by the fuzzy control system avoids an obstacle, tracks the path and avoids the obstacle in the path, to prove the performance and to check the evaluation and the application possibility of the fuzzy control system.

• Physical Therapy Korea
• /
• v.18 no.1
• /
• pp.57-63
• /
• 2011

The purpose of this study was to identify the effects of manual facilitation and a stick on lumbar and hip joint flexion angles in subject with lumbar flexion syndrome during forward bending from a sitting position. Fifteen subjects with lumbar flexion syndrome were recruited for this study. As a pretest, all subjects performed three repetitions of bending the trunk forward until the tips of their fingers touched the target bar. After this pretest, the subjects practiced the forward bending of the trunk 10 times, using either manual facilitation or a stick. Then, as a posttest, all subjects repeated the pretest procedure. The flexion angles of lumbar spine and hip joint during forward bending in a sitting position were measured using a three-dimensional motion analysis system. A paired t-test was used to determine the statistical differences between pre-test and post-test flexion angles and pre- and post-test flexion angle differences between forward bending with manual facilitation and forward bending with a stick. The level of statistical significance was set at p=.05. The results of the study showed that the angle of the lumbar flexion decreased significantly and the bilateral hip flexion angle increased significantly when performing forward bending with stick and manual facilitation. Furthermore, the angle of lumbar flexion decreased significantly and the angle of bilateral hip flexion increased significantly in forward bending with a stick compared to forward bending with manual facilitation. The findings of this study indicate that both forward bending with manual facilitation and sticks could be used to prevent excessive lumbar flexion and increase hip flexion, and that forward bending with a stick is more effective than forward bending with manual facilitation for inducing lumbar spine and hip joint angle changes.

• Physical Therapy Korea
• /
• v.27 no.1
• /
• pp.38-44
• /
• 2020

Background: Posterior shoulder tightness, which is a problem mainly seen in patients with shoulder impingement syndrome, disrupts the scapulohumeral rhythm between the humerus and scapulae. Objects: The aim of this study was to compare the effects of joint mobilization and stretching on shoulder muscle activity and internal rotation range of motion (ROM) of the glenohumeral joint in patients with impingement syndrome with posterior shoulder tightness. Methods: The research subjects included 22 in-patients with impingement syndrome with posterior shoulder tightness. They were randomly divided into two groups: one group (12 patients) was treated with joint mobilization and the other group (10 patients) was treated with stretching for the posterior shoulder tightness. Each treatment was performed five times a week for two weeks, and there were 15 sessions for each treatment. The ROM of the internal rotation and muscle activities of shoulder joint were evaluated pretest and posttest in each group. Electromyography data were collected from the upper, middle, and lower trapezius and serratus anterior during shoulder abduction of 90°, 120°, and 150°. Results: Both the joint mobilization and stretching groups showed significant decreases in muscle activity in the upper, middle, and lower trapezius on the posttest (p < 0.05). There was a significant difference in serratus anterior at 150° (p < 0.05), but there was no significant difference between group in post-hoc analysis (p > 0.025). The internal rotation ROM was significantly increased in the stretching group compared to that in the joint mobilization group (p < 0.025). Conclusion: This study found that both joint mobilization and stretching for posterior shoulder tightness were effective in muscle activity during arm abduction, also in order to increase internal rotation ROM of shoulder joint, stretching was effective in patients with impingement syndrome with posterior tightness.

• Magazine of the Korea Concrete Institute
• /
• v.5 no.4
• /
• pp.123-134
• /
• 1993

A rapid progress has been made over last decade in the state-of-the-art earthquake structura1 engineering towards a better understanding of both the earthqauke ground motion and structural response. These efforts seek to ensure that there will be no serious injury or loss of life in the event of earthquake, and that structures can be built at minimum cost. The design of structures in general, concrete structures in particular, to resist strong ground input motions is not a simple matter, and analytical models for such structures must be developed from a design perspective that accounts for the complexities of the structural responses. The primary obj ective of earthquake structural engineering research is to ensure the safety of structures by understanding and improving a design methodology. Ideally, this would require the development of an analytical model related to a design methodology that ensures a ductile performance. For the accurate assessment of the adequacy of analytically developed model, experiments conducted to study the inplane inelastic cyclic behavior of structures should verify the analytical approach. The fundamental goal of this paper is to present and demonstrate experimentally verified analytical methods that provide the adequate degree of safety and confidience in the behavior of reinforced concrete structural components. This study further attempts to extend the developed modeling techruque for use by practicing structural engineers for both the analysis and design.Plication of the relaxed diaphragm through left thoracotomy was done and result was excellent as seen on Fig. 5. Cause of eventration of the left hemidiaphragm was due to paralysis of the left phrenic nerve which was tested during thoracotomy.

• Journal of The Korean Association For Science Education
• /
• v.33 no.2
• /
• pp.522-537
• /
• 2013

This study analyzed the relationship among the construct level of analogical reasoning, prediction and uncertainty, and the construction of an explanatory model that were produced during small group discussions for scientific problem solving. This study was participated in by 8 students of K University divided into 2 teams conducting scientific problem solving. The participants took part in discussions in groups after achieving scientific problem solving individually. Through individual interviews afterwards, changes in their thinking through discussion activities were looked into. The results are as follows: The analogy at the Entities/Attributes level was used to make people clearly understand the characteristics of certain objects or entities in the discussions. The analogy at the Configuration/Motion level that was produced during the discussions ensured other participants to predict the results of problem solving. The analogy at the Mechanism/Causation level changed the structure of problem situations either to help other participants to reconstruct the explanatory model or to come up with a new situation that was never been through before to justify the created mechanism and through this, the case of creating Thought Experiments during the discussions were observed. if looking into the changes of analogies, each individual's analogic paradigm during the discussions were shown as production paradigm, reception-production paradigm, production-reception paradigm, and reception paradigm. The construction and reconstruction of the explanatory model were shown in analogic production paradigm, and in the reception paradigm of an analogy, participants changed their predictions or their certainty.