• 제목/요약/키워드: monte carlo methods

검색결과 944건 처리시간 0.028초

부등침하를 받는 회전 쉘의 최대응답 추정에 관한 연구 (A Study on Maximum Responses of Rotational Shells Subjected to Uneven Settlements by Stochastic Method)

  • 정명채
    • 전산구조공학
    • /
    • 제10권3호
    • /
    • pp.175-184
    • /
    • 1997
  • 본 논문의 목적은 부등침하를 받는 회전 쉘의 최대 응답과 표준편차와의 관계를 규명하는 것이다. 이를 위해 표준편차에 대한 최대응답의 비(.eta.)및 그 개략값(.eta./sub apr/)를 통계적 수법으로 조사하였다. 또한 탁월차수(predoninant harmonic number)의 함수로 표현되는 .eta./sub apr/을 구하기 위한 식을 제안하였다. 한편 침하는 Fourier급수로 표시하였다. 이때 각 항은 2개의 계수를 포함하게 되는데 하나는 진폭 스펙트럼이고 다른 하나는 위상각이다. 여기서는 위상각은 확률변수로, 진폭은 확정값으로 가정하였다. 해석에서는 .eta., .eta./sub apr/의 특성을 조사하기 위해 2가지 type의 진폭 스펙트럼을 실측데이터를 근거로 설정한 후, 각 type에 대해 100 sample씩의 위상각을 가정하여 사용하였다. .eta.,.eta./sub apr/은 응답의 종류, 쉘의 위치 그리고 진폭 스텍트럼의 type에 상관없이 거의 일정한 값으로 분포하며 그 값은 2.0에서 2.5사이의 값이 된다. 또한 .eta./sub apr/의 값은 .eta.의 값과 거의 비슷하지만 약간 큰 값으로 나타났다. 결론으로 부등침하를 받는 회전 쉘의 최대 응답은 표준편차의 .eta./sub apr/(약 2.5)배 임을 밝히고 있다.

  • PDF

물흡수선량 표준에 기반한 $^{192}Ir$ 근접치료 선원 교정 시 원통형 이온함의 이온함 간 변화 (Chamber to Chamber Variations of a Cylindrical Ionization Chamber for the Calibration of an $^{192}Ir$ Brachytherapy Source Based on an Absorbed Dose to Water Standards)

  • 김성훈;허현도;최상현;김찬형;민철희;신동오;최진호
    • 한국의학물리학회지:의학물리
    • /
    • 제20권1호
    • /
    • pp.7-13
    • /
    • 2009
  • 본 논문은 물 흡수선량 표준에 기반하여 근접치료 선원인 $^{192}Ir$을 교정하는 것에 대한 예비적 연구를 위한 것이다. 이온함을 사용하여 물흡수선량 표준에 기반하여 근접치료 선원을 교정하기 위해선, 빔 선질 교정인자인 $k_{Q,Q_0}$가 필요하다. 본 연구에선 일차 표준을 사용하여 지정된 거리에서의 흡수선량를 측정하는 데 있어서의 현실적인 어려움 때문에 몬테칼로 전산모사와 반실험적인 방법을 통하여 $k_{Q,Q_0}$를 결정하였다. 본 연구를 위해 PTW30013 이온함 5개를 선택하였다. 포괄적 $k^{gen}_{Q,Q_0}$ 값의 경우엔 이온함간 변화가 최대 4.0%에 이른 반면, 개별적 $k^{ind}_{Q,Q_0}$ 경우엔 이온함간 변화가 최대 0.5% 이내였다. 이 결과는 물 흡수선량에 기반하여 근접치료 선원인 $^{192}Ir$을 교정시에 이온함을 왜 개별적으로 교정해야 하는지, 개별적인 교정이 얼마나 중요한 지를 보여 준다. 가까운 장래에 공기커마 세기 대신에 사용자가 근접치료 선원을 고에너지 광자빔과 전자빔의 교정에서처럼 치료에서 관심있는 물리량인 물흡수선량의 관점에서 교정할 수 있기를 희망한다.

  • PDF

어린이용품 노출평가 연구에서의 결정론적 및 확률론적 방법론 사용실태 분석 및 고찰 (Comparison of Deterministic and Probabilistic Approaches through Cases of Exposure Assessment of Child Products)

  • 장보윤;정다인;이헌주
    • 한국환경보건학회지
    • /
    • 제43권3호
    • /
    • pp.223-232
    • /
    • 2017
  • Objectives: In response to increased interest in the safety of children's products, a risk management system is being prepared through exposure assessment of hazardous chemicals. To estimate exposure levels, risk assessors are using deterministic and probabilistic approaches to statistical methodology and a commercialized Monte Carlo simulation based on tools (MCTool) to efficiently support calculation of the probability density functions. This study was conducted to analyze and discuss the usage patterns and problems associated with the results of these two approaches and MCTools used in the case of probabilistic approaches by reviewing research reports related to exposure assessment for children's products. Methods: We collected six research reports on exposure and risk assessment of children's products and summarized the deterministic results and corresponding underlying distributions for exposure dose and concentration results estimated through deterministic and probabilistic approaches. We focused on mechanisms and differences in the MCTools used for decision making with probabilistic distributions to validate the simulation adequacy in detail. Results: The estimation results of exposure dose and concentration from the deterministic approaches were 0.19-3.98 times higher than the results from the probabilistic approach. For the probabilistic approach, the use of lognormal, Student's T, and Weibull distributions had the highest frequency as underlying distributions of the input parameters. However, we could not examine the reasons for the selection of each distribution because of the absence of test-statistics. In addition, there were some cases estimating the discrete probability distribution model as the underlying distribution for continuous variables, such as weight. To find the cause of abnormal simulations, we applied two MCTools used for all reports and described the improper usage routes of MCTools. Conclusions: For transparent and realistic exposure assessment, it is necessary to 1) establish standardized guidelines for the proper use of the two statistical approaches, including notes by MCTool and 2) consider the development of a new software tool with proper configurations and features specialized for risk assessment. Such guidelines and software will make exposure assessment more user-friendly, consistent, and rapid in the future.

Genetic Contribution of Indigenous Yakutian Cattle to Two Hybrid Populations, Revealed by Microsatellite Variation

  • Li, M.H.;Nogovitsina, E.;Ivanova, Z.;Erhardt, G.;Vilkki, J.;Popov, R.;Ammosov, I.;Kiselyova, T.;Kantanen, J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제18권5호
    • /
    • pp.613-619
    • /
    • 2005
  • Indigenous Yakutian cattle' adaptation to the hardest subarctic conditions makes them a valuable genetic resource for cattle breeding in the Siberian area. Since early last century, crossbreeding between native Yakutian cattle and imported Simmental and Kholmogory breeds has been widely adopted. In this study, variations at 22 polymorphic microsatellite loci in 5 populations of Yakutian, Kholmogory, Simmental, Yakutian-Kholmogory and Yakutian-Simmental cattle were analysed to estimate the genetic contribution of Yakutian cattle to the two hybrid populations. Three statistical approaches were used: the weighted least-squares (WLS) method which considers all allele frequencies; a recently developed implementation of a Markov chain Monte Carlo (MCMC) method called likelihood-based estimation of admixture (LEA); and a model-based Bayesian admixture analysis method (STRUCTURE). At population-level admixture analyses, the estimate based on the LEA was consistent with that obtained by the WLS method. Both methods showed that the genetic contribution of the indigenous Yakutian cattle in Yakutian-Kholmogory was small (9.6% by the LEA and 14.2% by the WLS method). In the Yakutian-Simmental population, the genetic contribution of the indigenous Yakutian cattle was considerably higher (62.8% by the LEA and 56.9% by the WLS method). Individual-level admixture analyses using STRUCTURE proved to be more informative than the multidimensional scaling analysis (MDSA) based on individual-based genetic distances. Of the 9 Yakutian-Simmental animals studied, 8 showed admixed origin, whereas of the 14 studied Yakutian-Kholmogory animals only 2 showed Yakutian ancestry (>5%). The mean posterior distributions of individual admixture coefficient (q) varied greatly among the samples in both hybrid populations. This study revealed a minor existing contribution of the Yakutian cattle in the Yakutian-Kholmogory hybrid population, but in the Yakutian-Simmental hybrid population, a major genetic contribution of the Yakutian cattle was seen. The results reflect the different crossbreeding patterns used in the development of the two hybrid populations. Additionally, molecular evidence for differences among individual admixture proportions was seen in both hybrid populations, resulting from the stochastic process in crossing over generations.

혈관성형술 후 재협착 방지 치료에 사용하기 위한 원통형 풍선 Re-188-DTPA의 선량 분포와 내부피폭 선량 (Dosimetry and Medical Internal Radiation Dose of Re-188-DTPA for Endovascular Balloon Brachytherapy Against Restenosis after Coronary Angioplasty)

  • 이진;이동수;신승애;정재민;정준기;이명철
    • 대한핵의학회지
    • /
    • 제33권2호
    • /
    • pp.163-171
    • /
    • 1999
  • 목적 : 혈관 재협착을 막기 위하여 풍선에 용액 형태의 베타 방출 핵종을 넣어 사용하는 방법이 연구되고 있다. 이 연구에서는 Re-188-DTPA를 풍선에 넣어 사용하는 경우 주위 혈관에 대한 에너지 분포와 용액이 풍선에서 누출되는 경우 주요 장기와 전신에의 흡수 선량을 계산하였다. 대상 및 방법: 전자와 광자의 물에서의 운반은 몬테카를로 EGS4 코드를 사용하였으며 풍선은 직경 3 mm, 길이 20 mm의 원기둥으로 대체하였다. 개에게 Re-188-DTPA 370MBq를 주사하여 감마카메라로 영상을 얻어 주요장기의 잔류 시간을 구하였고 전신과 주요 장기에의 흡수 선량은 MIRDOSE3와 ICRP Dynamic Bladder모델을 사용하여 계산하였다. 결과: 3,700 MBq/1ml을 100초 동안 조사하였을 때 풍선 표면에 전달된 에너지는 17.6 Gy, 표면으로부터 0.5 mm 떨어진 곳에서 9.5 Gy이었다. 풍선에서 용액이 누출되었을 경우 전신에 0.005 mGy/MBq, 방광에 2.39 mGy/MBq의 흡수 선량이 전달되었다. 결론: 관상동맥 풍선 성형술용 풍선에 Re-188-DTPA를 주입하여 사용하는 방법이 목표선량을 조사하는 데 적절하고 방사선 안전의 관점에서 사용 가능한 방법이라고 생각한다.

  • PDF

혈관내 방사선치료를 위한 이론적 선원 설계 및 선량적 관점에서의 적합성 연구: 출력변조를 이용한 근접치료에 대한 제안 (Conceptual Source Design and Dosimetric Feasibility Study for Intravascular Treatment: A Proposal for Intensity Modulated Brachytherapy)

  • 김시용;한은영;;하성환
    • Radiation Oncology Journal
    • /
    • 제21권2호
    • /
    • pp.158-166
    • /
    • 2003
  • 목적: 본 연구는 새로운 근접치료선원의 이론적 설계를 통해 출력변조를 이용한 혈관내 방사선치료를 제안한다. 대상 및 방법: 제시된 이론적 선원은 기존의 선원과는 달리 선원물질과 차폐물질(스테인리스 스틸, 또는 텅스텐) 둘 다로 구성되며 이는 방위방향으로 비대칭적 방사선량을 제공할 수 있게 한다. 따라서, 방위방향으로 선원의 방향과 체류시간을 조절함으로써 출력변조를 통한 근접치료가 가능해진다. Novoste Beta-Cath system에서 사용하는 Sr-90/Y 전자방출 선원과 유사한 모양의 두 가지 단순화한 선원을 연구의 대상으로 고려하였다. 첫 번째 선원은 선원물질과 차폐물질이 각각 반씩 차지하며, 두 번째 선원은 1/4은 선원물질로, 나머지 3/4은 차폐물질로 구성된다. 두 선원에 대해 방위 및 방사방향으로의 선량분포를 MCNP 몬테 카를로 코드를 이용하여 계산하였다. 결과: 선원이 혈관내의 중심에 위치하지 않게 되는 가상조건에서의 선량 최적화 계산을 시도한 결과, 혈관내벽에 미치는 선량의 최고치와 최저치의 차이가 87$\%$에서 7$\%$까지 줄어들 수 있음을 보였다. 결론: 본 연구에서 제시된 이론적 선원은 선량적 관점에서의 적합성 여부에 관해 매우 고무적인 결과를 보여 줌으로써 출력변조를 통한 혈관내 근접방사선치료의 가능성을 나타내었다. 본 과제의 다음 단계는 굵기가 가는 맥관 내에서 선원의 위치를 파악하여 그를 방위방향으로 정확하게 회전시킬 수 있는 방사선 전달 체계의 개발이라 할 수 있다.

실물옵션을 이용한 항만배후단지의 가치평가 -부산신항 배후단지 사례분석을 중심으로- (Economic Evaluation of Port Hinterlands Using Real Option -Focusing on the Case Study for Hinterland of Busan New Port-)

  • 김명희;이기환
    • 한국항만경제학회지
    • /
    • 제28권3호
    • /
    • pp.235-257
    • /
    • 2012
  • 최근 변화하는 항만수요 요구에 신속하게 대응하기 위하여 항만은 그 역할변화를 모색하고 있다. 무역을 위한 단순한 장소가 아닌 로지스틱 체인의 중요한 한 노드로서 기능을 하는 항만으로 변모하고 있다. 항만이 로지스틱 체인 속의 경쟁우위 요소로서 그 역할을 다하기 위해 항만 배후단지 공급의 필요성을 역설한 연구들이 다수 등장하였고 각 항만국들은 앞다투어 항만개발계획을 수립하고 있는 실정이다. 우리 정부 역시 "전국 무역항 항만배후단지 개발 종합계획(2006)"을 통해 아시아의 로지스틱 허브항을 육성하기 위한 항만배후단지 개발계획을 발표했다. 항만배후단지 개발을 위한 투자평가에 대한 선행연구들을 살펴보면 대부분 전통적인 투자평가 기법인 DCF(discounted cash flow)를 이용해 그 가치평가를 실시하고 있다. 그러나 항만개발사업의 경우 거대 초기 투자가 필요하고 장기간의 투자회수 기간이 소요되어 기존의 DCF법에 의한 투자평가는 미래의 불확실성에 대한 가치를 과소평가할 여지가 있다. 이에 본 연구에서는 실제 항만배후단지 경제성평가 데이터를 이용하여 기존의 DCF법과 실물옵션 가치법의 결과값을 비교 분석하였다. 그 결과 DCF에 의한 항만배후단지 경제성평가 결과는 NPV는 -73,601(백만)원, B/C ratio는 0.97, IRR은 5.06%을 보여 개발에 대한 모호함이 있으나, 실물옵션을 이용하여 추정된 확장된 NPV 값은 1,839,000(백만)원으로 개발에 대한 긍정적인 결과 값이 도출되었다. 본 연구는 실증연구를 통해 불확실성이 큰 항만투자영역에 있어 불확실성의 가치를 반영하지 못하는 DCF법을 보완할 수 있는 새로운 평가방법으로 실물옵션법의 유용성을 소개하고자 한다.

공정능력지수들과 6 시그마 품질수준에 대한 통계적 추론 (Statistical Inference for Process Capability Indices and 6 Sigma Qualify Levels)

  • 조중재;심규영;박병선
    • Communications for Statistical Applications and Methods
    • /
    • 제15권3호
    • /
    • pp.451-464
    • /
    • 2008
  • 6 시그마는 백만 기회당 3.4개의 결점만을 갖는 최고의 품질수준을 의미한다. 일반적으로 높은 시그마 품질수준은 고객들에게 높은 만족도를 부여하는 것으로 알려져 있다. 공정능력지수들과 시그마 품질수준 $Z_{st}$는 6시그마 산업에서 공정능력을 평가하기 위하여 널리 이용되고 있다 공정능력지수에 관한 대부분의 평가들은 공정능력분석에 대해 경우에 따라 믿기 어려운 상황을 초래할 수도 있는 점 추정에 초점을 두고 있다. 본 논문에서는 현장 실무자들이 공정능력 여부를 결정하기 위하여 사용하고 있는 6시그마 품질수준 $Z_{st}$와 공정능력지수들 $C_p$, $C_{pk}$$C_{pm}$에 대하여 몇 가지 통계적 추정문제를 기초로 보다 효율적인 검정 방법에 대하여 제안, 연구하였다. 제안된 붓스트랩 검정 방법에 근거한 모의실험 결과는 공정분포의 정규성 여부에 관계없이 그리고 복잡한 계산 과정 없이 보다 효율적으로 적용될 수 있음을 입증하고 있다.

공정능력지수 Cpmk를 평가함에서의 바람직한 가설검정 (Test of Hypothesis in Assessing Process Capability Index Cpmk)

  • 조중재;유혜경;한정수
    • Communications for Statistical Applications and Methods
    • /
    • 제17권3호
    • /
    • pp.459-471
    • /
    • 2010
  • 일반적으로 고객들은 어떤 상품에 대한 품질수준이 높을수록 보다 높은 만족을 얻는 것으로 알려져 있다. 보통품질수준은 공정능력지수에 의해 측정된다. 공정능력이란 공정이 관리상태에 있을 때, 그 공정에서 생산, 제공되는 상품의 변동이 어느 정도인가를 나타내는 중요한 개념이다. 3세대 공정능력지수 $C_{pmk}$는 흔히 현장에서 사용되고 있는 지수$C_p$$C_{pk}$보다 공정능력을 평가함에 보다 설명력이 있고 합리적인지수라고 할 수 있다. 공정능력에 대한 효율성 평가는 대부분 점추정과 구간추정을 통하여 행하여지고 있는 바, 가설검정을 통한 의사결정 또한 중요한 문제라고 할 수 있다. 본 논문에서는 공정능력여부를 결정하기위하여 공정능력지수 $C_{pmk}$에 대한 보다 유용한 가설검정방법에 대하여 연구하였다. 제안된 붓스트랩 가설검정방법은 공정분포가 정규분포에 따르던 그렇지 않던지 간에 매우 유용하며 보다 수월하게 활용할 수 있음을 밝혔다. 그리고 수치적인 모의실험을 통해 공정의 정규성 여부와 상관없이 제안된 가설검정방법의 타당성을 밝히고자 하였다.

The Robust Phylogeny of Korean Wild Boar (Sus scrofa coreanus) Using Partial D-Loop Sequence of mtDNA

  • Cho, In-Cheol;Han, Sang-Hyun;Fang, Meiying;Lee, Sung-Soo;Ko, Moon-Suck;Lee, Hang;Lim, Hyun-Tae;Yoo, Chae-Kyoung;Lee, Jun-Heon;Jeon, Jin-Tae
    • Molecules and Cells
    • /
    • 제28권5호
    • /
    • pp.423-430
    • /
    • 2009
  • In order to elucidate the precise phylogenetic relationships of Korean wild boar (Sus scrofa coreanus), a partial mtDNA D-loop region (1,274 bp, NC_000845 nucleotide positions 16576-1236) was sequenced among 56 Korean wild boars. In total, 25 haplotypes were identified and classified into four distinct subgroups (K1 to K4) based on Bayesian phylogenetic analysis using Markov chain Monte Carlo methods. An extended analysis, adding 139 wild boars sampled worldwide, confirmed that Korean wild boars clearly belong to the Asian wild boar cluster. Unexpectedly, the Myanmarese/Thai wild boar population was detected on the same branch as Korean wild boar subgroups K3 and K4. A parsimonious median-joining network analysis including all Asian wild boar haplotypes again revealed four maternal lineages of Korean wild boars, which corresponded to the four Korean wild boar subgroups identified previously. In an additional analysis, we supplemented the Asian wild boar network with 34 Korean and Chinese domestic pig haplotypes. We found only one haplotype, C31, that was shared by Chinese wild, Chinese domestic and Korean domestic pigs. In contrast to our expectation that Korean wild boars contributed to the gene pool of Korean native pigs, these data clearly suggest that Korean native pigs would be introduced from China after domestication from Chinese wild boars.