• 제목/요약/키워드: monolithic microwave integrated circuit (MMIC)

검색결과 119건 처리시간 0.023초

밀리미터파 응용을 위한 완전집적 다운컨버터 MMIC (A fully integrated downconverter MMIC for millimeter wave applications)

  • 정장현;윤영
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권1호
    • /
    • pp.99-104
    • /
    • 2013
  • 본 논문에서는 밀리미터파에의 응용을 위하여, 소형화된 다운컨버터 MMIC(monolithic microwave integrated circuit)를 제안하였다. 구체적으로는, RF(radio frequency) 및 LO(local oscilator) 신호의 격리특성을 위해 Lange 커플러가 삽입되었고, ${\lambda}$/4 전송선로를 연결하여 역위상 RF와 동위상 LO 신호가 믹서부분 FET(field effect transistor)의 게이트에 인가되었다. 또한, IF(intermediate frequency) 출력 신호의 역위상의 결합과 LO 누설신호 제거를 위하여 역위상 결합용 능동 벌룬이 출력 포트에 설치되었다. 측정 결과에 따르면, 제안된 다운컨버터 MMIC는 양호한 RF 특성을 보였다. 구체적으로, 63 GHz의 RF 주파수와 60.6 GHz의 LO 주파수에서 IF 출력 포트에서의 LO 누설 전력이 .25 dBc, RF와 LO의 격리특성은 18 dB를 보였으며, 변환 이득이 10.3 dB를 보였다. 따라서, SAW 필터와 같은 LO 제거용 off-chip 소자는 제안된 다운컨버터 MMIC에서는 필요하지 않게 되었다. 모든 능동소자와 수동소자가 GaAs MMIC 내부에 집적되었으며, 전체 사이즈는 $2.2{\times}1.4mm^2$ 로써 초소형 MMIC가 구현되었다.

위성용 MMIC 기술 동향 (Technological Trend for Satellite Application MMIC)

  • 원영진;이진호;천용식
    • 항공우주기술
    • /
    • 제7권1호
    • /
    • pp.121-128
    • /
    • 2008
  • 이동 통신 및 위성 통신 분야에 있어서 무선 통신 기술 분야는 무선 환경에서 신호를 보내고 받는 기능을 수행하는 중요한 분야이다. 이러한 무선 통신 분야에서 송수신한을 구성하는 송수신 부품은 RF 시스템의 성능을 좌우한다. 따라서 위성 통신 분야에 있어서 신뢰성을 획득하기 위해서는 고집적화와 소형화를 통한 경쟁력 확보가 필수적인데 이를 위한 기술이 MMIC 이다. MMIC란 RF 부품을 설계하고 제작하는 기술로서 본 논문은 MMIC 기술에 대한 소개와 위성 분야에서의 기술적인 동향과 전망을 기술하고 있다.

  • PDF

High Output Power and High Fundamental Leakage Suppression Frequency Doubler MMIC for E-Band Transceiver

  • Chang, Dong-Pil;Yom, In-Bok
    • Journal of electromagnetic engineering and science
    • /
    • 제14권4호
    • /
    • pp.342-345
    • /
    • 2014
  • An active frequency doubler monolithic microwave integrated circuit (MMIC) for E-band transceiver applications is presented in this letter. This MMIC has been fabricated in a commercial $0.1-{\mu}m$ GaAs pseudomorphic high electron mobility transistor (pHEMT) process on a 2-mil thick substrate wafer. The fabricated MMIC chip has been measured to have a high output power performance of over 13 dBm with a high fundamental leakage suppression of more than 38 dBc in the frequency range of 71 to 86 GHz under an input signal condition of 10 dBm. A microstrip coupled line is used at the output circuit of the doubler section to implement impedance matching and simultaneously enhance the fundamental leakage suppression. The fabricated chip is has a size of $2.5mm{\times}1.2mm$.

MMIC 기술 동향

  • 김동구;박형무
    • ETRI Journal
    • /
    • 제9권3호
    • /
    • pp.127-138
    • /
    • 1987
  • 본고에서는 MMIC (Monolithic Microwave Integrated Circuit)의 연구동향을 미국을 중심으로 소개한다. MMIC의 역사, 공정, 소자, 설계, packaging, 측정에 대하여 조사함으로써 차세대 화합물반도체 MMIC개발의 앞으로의 방향을 모색하고자 한다. 본고는 미국 Microwave & RF 논문지 1987년 3월호에 게재된 R. S. Pegally와 D. Maki의 논문내용을 중심으로 편역한 것이다.

  • PDF

GaAs MMIC상에서 주기적 접지구조를 가지는 결합선로의 절연특성에 관한 연구 (A Study on Characteristics of Coupled Line Employing Periodical Ground Structure on GaAs MMIC)

  • 김세호;강석엽;윤영
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제33권1호
    • /
    • pp.159-165
    • /
    • 2009
  • In this study, using a periodical ground structure(PGS) on GaAs monolithic microwave integrated circuit(MMIC), transmission line with a high isolation characteristic was developed for application to compact signal/bias lines of highly integrated MMIC. And the origin of the high isolation characteristic was theoretically investigated. The high isolation characteristic was originated from a resonance between adjacent microstrip lines employing PGS. With only a spacing of $20{\mu}m$, the coupled microstrip line employing PGS showed an isolation value of -47 dB at 60 GHz. The frequency range for high isolation was easily controlled by changing the PGS structure. Above results indicate that microstrip lines employing PGS are very useful for application to compact signal/bias lines of highly integrated MMIC requiring a high isolation characteristics between lines. In addition, equivalent circuit employing closed-form equation for the coupled line with PGS was also extracted.

A D-Band Balanced Subharmonically-Pumped Resistive Mixer Based on 100-nm mHEMT Technology

  • Campos-Roca, Y.;Tessmann, A.;Massler, H.;Leuther, A.
    • ETRI Journal
    • /
    • 제33권5호
    • /
    • pp.818-821
    • /
    • 2011
  • A D-band subharmonically-pumped resistive mixer has been designed, processed, and experimentally tested. The circuit is based on a $180^{\circ}$ power divider structure consisting of a Lange coupler followed by a ${\lambda}$/4 transmission line (at local oscillator (LO) frequency). This monolithic microwave integrated circuit (MMIC) has been realized in coplanar waveguide technology by using an InAlAs/InGaAs-based metamorphic high electron mobility transistor process with 100-nm gate length. The MMIC achieves a measured conversion loss between 12.5 dB and 16 dB in the radio frequency bandwidth from 120 GHz to 150 GHz with 4-dBm LO drive and an intermediate frequency of 100 MHz. The input 1-dB compression point and IIP3 were simulated to be 2 dBm and 13 dBm, respectively.

GaAs MMIC 상에서 주기적 접지구조를 가지는 미앤더 선로에 관한 연구 (A Study on a Meander line employing Periodic Patterned Ground Structure on GaAs MMIC)

  • 정보라;윤영
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제34권2호
    • /
    • pp.325-331
    • /
    • 2010
  • 본 논문에서는 주기적 접지구조(PPGS)를 가지는 소형 단파장의 미앤더 선로를 GaAs MMIC(Monolithic Microwave Integrated Circuit) 상에 구현하였다. PPGS구조를 이용한 미앤더 선로는 기존의 미앤더 선로에 존재하던 용량 $C_a$와 함께 추가적인 용량 $C_b$를 가짐으로써 전체적인 용량이 커지게 되어, 단파장 특성을 보여주었다. 기존의 미앤더 선로는 주기적 구조가 아닌데 반해 PPGS 구조의 미앤더 선로는 주기적 구조이므로 $\beta$값이 큰 slow-wave가 존재하며, 이로 인해 종래의 미앤더 선로에 비해 선로 상에서 훨씬 더 큰 위상변화량을 보여준다. 본 논문에서는 상기 미앤더 선로의 특성을 실험적으로 고찰하여 PPGS 구조의 미앤더 선로를 병렬 인덕터로 사용할 경우, 기존 미앤더 선로를 사용할 때 보다 높은 인덕턴스 값을 가지므로 동일한 길이의 기존 선로보다 큰 인덕턴스 값을 가지는 정합 소자로써 사용할 수 있음을 확인하였다.

Ku-band용 Double Balanced MMIC Mixer의 설계 및 제작 (Design of Double Balanced MMIC Mixer for Ku-band)

  • 류근관
    • 한국ITS학회 논문지
    • /
    • 제2권2호
    • /
    • pp.97-101
    • /
    • 2003
  • 본 논문에서는 Ku-band용 주파수 하향변환기에 사용할 수 있는 MMIC (monolithic microwave integrated circuit) mixer를 InGaAs/GaAs p-HEMT 공정의 Schottky diode를 이용하여 설계 및 제작하였다. 일반적인 double balanced mixer의 구조에서 IF단자와 LO 단자를 서로 바꾸어 설계함으로써 mC chip의 크기를 크게 줄일 수 있었다. 설계된 MMIC mixer는 RF(14.0 - 14.5 GHz)와 IF(12.252 - 12.752 GHz)의 주파수 대역에서 사용할 수 있다. 제작된 초소형의 MMIC mixer chip은 크기가 3.3 m X 3.0 m이고, on-wafer측정 결과 9.8 dB 이하의 변환손실과 23 dB 이상의 RF-to-IF 격리도 및 38 dB 이상의 LO-to-IF 격리도의 특성을 각각 얻었다.

  • PDF

Ka-band용 Double Balanced MMIC Mixer의 설계 및 제작 (Design of Double Balanced MMIC Mixer for Ka-band)

  • 류근관
    • 한국정보통신학회논문지
    • /
    • 제8권2호
    • /
    • pp.227-231
    • /
    • 2004
  • 본 논문에서는 TRW사의 InGaAs/GaAs p-HEMT 공정의 쇼트키 다이오드를 이용하여 Ka대역용 하향수신변환기에 이용할 수 있는 MMIC(Monolithic Microwave Integrated Circuit) 주파수 혼합기를 설계 및 제작하였다. RF는 30.6∼31.0 ㎓이고 LO 9.8 ㎓를 이용하여 IF 20.8∼21.2 ㎓를 얻을 수 있는 본 MMIC 주파수 혼합기는 발룬의 크기를 줄이기 위해 LO와 IF 단자를 서로 바꾸어 설계함으로써 전체 회로의 크기를 줄일 수 있었다. 제작된 MMIC 주파수 혼합기의 크기는 3000umx1500um이며 on-wafer 측정 결과 대역 내에서 7.8㏈ 이하의 변환손실을 얻었다. 또한 27㏈ 이상의 LO-RF 격리도, 19㏈ 이상의 LO-IF 격리도 및 39㏈ 이상의 RF-IF 격리도를 각각 얻었다.

MMIC 기술 동향 및 설계 기술

  • 이재현
    • 전자공학회지
    • /
    • 제29권2호
    • /
    • pp.25-34
    • /
    • 2002
  • 무선통신 및 센서 분야의 수요 증가로 관심이 확대되고 있는 밀리파 무선서비스용 MMIC (Monolithic Microwave Integrated Circuit) 기술동향 및 설계에 대하여 기술한다. 밀리파 무선서비스로는 자동차 레이다, HDR(High Data Rate)무선 LAN(Local Area Network), LMDS(Local Multipoint Distribution Service)등이 있다. 이런 서비스에 필요한 MMIC는 저렴하고 고집적율을 가지며 고성능이고, 새롭게 등장하는 서비스로의 설계 변경이 용이하여야 한다. 본 논문에서는 이를 위한 MMIC 동향과 설계기술을 논한다.

  • PDF