• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_1
• /
• pp.149-161
• /
• 2020

We describe a new approach to implement of trajectory control and track record of articulated manipulator based on monitoring simulator for smart factory. The learning control algorithm was applied in implementation real-time control to provide enhanced motion control performance for robotic manipulators. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, or values of manipulator parameters and payload. Performance of the proposed controller is illustrated by simulation and experimental results for robot manipulator consisting of six joints at the joint space and Cartesian space.by monitoring simulator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.709-711
• /
• 2016

An automatic control system to control a machinery system is managed by the PLC(Program Logic Control) and measured a machinery status from the sensor information to improve productivity in the industry field. This paper to propose a diagnostic monitoring system consists of a relay module, a one-chip processor module and a computer monitoring system. To improve productive capacity, the system is to check an auxiliary relay's trouble by a real-time monitoring.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.4_1
• /
• pp.397-409
• /
• 2021

This study proposes a new approach to implimentation of robust control and torque control response analysis based on monitoring simulator for smart factory. According to the physical properties of a flexible manipulator, a two time-scale approach, namely, singular perturbation ap proach, is further utilized for thorough analysis and general controller design. It is shown that asymptotic motional tracking can be effectively achieved, whereas the force regulation errors can be made arbitrarily small. For demonstration of the proposed technology performance, experiments of a eight joint flexible manipulator are performed for the proposed control method, and the reliability of proposed control results are illustrated based on monitoring simulator.

• International Journal of Quality Innovation
• /
• v.1 no.1
• /
• pp.97-105
• /
• 2000

In this paper, a two-section method for measuring is introduced and the variation sources of measurement process are analysed. Measuring is a special process in general process. Various variation source must be firstly decomposed so that the statistical distribution law of measuring process can be established, and then implement monitoring control of the measuring process. A special method to obtain the measuring variation is discussed, and a monitoring control technique for measuring process is studied based statistical distribution. Towards the end, we briefly introduce software design for the analysis and control of a measurement process.

• Journal of Wind Energy
• /
• v.2 no.1
• /
• pp.90-96
• /
• 2011

The purpose of this paper is to describe the control system for optimal performance of 2MW gearless PMSG wind turbine system, and to afford some techniques of the algorithm selection and design optimization of the wind turbine control system through analysis of load calculation and control characteristic. Wind turbine control system is composed of the main control system and remote control and monitoring system. The main control system is industrial PC based controller, and the remote control and monitoring system is a server based computer system. The main control system has a supervisory control of the wind turbine with operation procedures and power-speed control through the torque control by pitch angle. There are some applications to optimize the wind turbine system at the starting mode with increasing of rotor speed, and cut-in operating mode to prevent trundling cut-in and cut-out, a gain scheduling of pitch PID controller, torque scheduling and limitation of generation power by temperature limitation or remote command by remote control and monitoring system. Also, the server operation program of the remote control and monitoring system and the design of graphical display are described in this paper.

• Journal of Korea Multimedia Society
• /
• v.14 no.5
• /
• pp.703-709
• /
• 2011

State-based infrastructure on IT-based network are prone to numerous cyber attack including subsequent hacking and internet infringement. These acts of terrorism are increasing because of the expanding IT convergence technology. Recently, the trend on cyber security monitoring and control researches focus on combining the general idea of security monitoring and control along with IT field and other control systems. This convergence trend has been increasing in both the use and importance. This research analyzes the state-based infrastructure monitoring and control system, its vulnerability as well as its improvement by incorporating the cyber convergence systems to existing systems. The subject of this research is for extensive use of CCTV systems which is expanded for 'CCTV Monitoring and Control Field' as well as 'Traffic Monitoring and Control Field' operated by 'Intelligent Traffic Information System' and Disaster Management Area which is studied in various fields. Eventually, the objective of the paper is to solve these issues, to apply related systems and to suggest improvement on the convergence system.

• International Journal of Contents
• /
• v.9 no.4
• /
• pp.22-29
• /
• 2013

In this paper, we propose a integrated real-time monitoring system for recycling agriculture resourcing based on USN. We design and implement the monitoring system so that we can integrate the quality control of farmyard and liquid manures, barn environment monitoring, and positioning information control into a total management system performing recycling of excrement and manure. Selection of sensors and sensor-node construction and requirements, structure of wire/wireless communication networks, and design of monitoring program are also presented. As a result of operating our system, we can get over various drawbacks of conventional separated system and promote the proper circulation of excrement up to the farmyard. We confirm that these advanced effects arise from the effective management of the total system integrating quality control of farmyard/liquid manure, barn/farmhouse information, and vehicle moving monitoring information etc. Moreover, this monitoring system is able to exchange real-time information throughout communication networks so that we can construct a convenient information environment for agricultural community by converging IT technology with farm and stockbreeding industries. Finally we present some results of processing using our monitoring system. Sensing data and their graphs are processed in real-time, positioning information on the v-world map offers various moving paths of vehicles, and statistical analysis shows all the procedure from excrement occurrence to recycling and resourcing.

• Journal of Environmental Science International
• /
• v.29 no.8
• /
• pp.847-855
• /
• 2020

This study presented problems and improvements in the quality control of an air monitoring network, using Gyeongnam as an example. 1) The effective utilization rate of the air monitoring was 95%, which showed good management, but the maximum of 2% was indicated by zero or detection limit among measurement data. 2) In the equivalence evaluation of PM_2.5, the slope and intercept satisfy the evaluation criteria; however, 1% of the PM_2.5/PM₁₀ ratios were outliers. 3) All air monitoring stations meet the quality control standards; however, the management status is added to the quality inspection, management system is unified and the related budget is expanded, and systematic commission management is required.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.1
• /
• pp.77-87
• /
• 2009

In existing systems, the best method inhibiting corrosion control in water distribution systems is to reduce water corrosiveness. Water corrosion can be decreased by controlling water quality through simple water treatment in treatment plants. On this research, we study the characteristics of tab water qualities in domestic areas, assessment of corrosive water quality and the method of water quality monitoring. This review presents the method of water quality monitoring which is the most applicable. Monitoring for corrosion control in waterworks system is the most proper method; It can prevent serious accidents economically and reduce civil appeals. Surely we should assess corrosive water quality in tab water, and introduce water treatment methods to control corrosive water quality before monitoring for corrosion. According to a lot of researches, it has been proved that simple water treatments can reduce the pipe corrosion. In this review we should indicate that we do not control of the corrosive water quality due to domestic conditions, we should monitor the water quality basically. Therefore, we recognize how the existing water quality can cause problems on pipeline corrosion, how to deal with it. Then it will be possible to apply water quality monitoring for corrosion control in water distribution system. Monitoring for corrosion control can be expressed by LI index, it is already known in literatures. This review presents more simple method than existing methods than existing ones we expect to apply these methods to SCADA in the future.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.375-380
• /
• 2021

Internal control is important for monitoring operations of organizations. In order to achieve the quality of internal control, organizations need to recognize different perspectives in which the components of internal control play a decisive role. Internal control is a process designed by the manager and it is applied within the organization to provide reasonable assurance of the reliability of financial information and to comply with policies, procedures, rules, regulations and laws. The article uses the ordinary least squares method and the seven-point Likert scale to test the variables affecting the quality of internal control in 18 Vietnamese listed banks. The article surveyed 179 leaders of listed banks. The results show that there are three variables out of a total of five variables that positively affect the quality of internal control, including the control environment, control activities, and monitoring. Accordingly, the managers of Vietnamese listed banks need to pay attention to building a corporate culture environment, improve the quality of control activities, and periodically and regularly conduct the monitoring. It contributes to improving the quality of internal control and is also an opportunity to increase economic benefits for Vietnamese listed banks in the context of international economic integration.