Water Quality Monitoring for Corrosion Control in Waterworks System

상수도관망 시스템의 부식제어를 위한 수질모니터링

  • 이현동 (한국건설기술연구원 첨단환경연구실) ;
  • 곽필재 (한국건설기술연구원 첨단환경연구실) ;
  • 이지은 (과학기술연합대학원대학교 수자원환경공학과) ;
  • 김영관 (강원대학교 환경공학과) ;
  • ;
  • Received : 2008.04.23
  • Accepted : 2009.02.13
  • Published : 2009.02.15

Abstract

In existing systems, the best method inhibiting corrosion control in water distribution systems is to reduce water corrosiveness. Water corrosion can be decreased by controlling water quality through simple water treatment in treatment plants. On this research, we study the characteristics of tab water qualities in domestic areas, assessment of corrosive water quality and the method of water quality monitoring. This review presents the method of water quality monitoring which is the most applicable. Monitoring for corrosion control in waterworks system is the most proper method; It can prevent serious accidents economically and reduce civil appeals. Surely we should assess corrosive water quality in tab water, and introduce water treatment methods to control corrosive water quality before monitoring for corrosion. According to a lot of researches, it has been proved that simple water treatments can reduce the pipe corrosion. In this review we should indicate that we do not control of the corrosive water quality due to domestic conditions, we should monitor the water quality basically. Therefore, we recognize how the existing water quality can cause problems on pipeline corrosion, how to deal with it. Then it will be possible to apply water quality monitoring for corrosion control in water distribution system. Monitoring for corrosion control can be expressed by LI index, it is already known in literatures. This review presents more simple method than existing methods than existing ones we expect to apply these methods to SCADA in the future.

Keywords

References

  1. 곽필재, 이현동, 남상호 (1997) 상수도관로의 부식방지를 위한 수돗물의 침식성 평가, 대한상하수도학회지, 11(1), pp. 53-63
  2. 곽필재, 이현동, 남상호, 정원식 (2001) 국내 수계별 수돗물의 부식성 및 금속용출 특성 평가에 관한 연구, 대한환경공학회지, 23(7), pp. 1195-1203
  3. 서규태, 정해룡, 이현동, 정원식, 지재성 (1998) 배수시스템내부식영향 수질인자의 변화특성, 대한환경공학회지, 20(8), pp. 1151-1160
  4. 이현동 외(2001) '상수도관로의 부식 및 노후도 예측모델 개발 3차년도 보고서', 한국건설기술연구원
  5. Leroy, P., Schock, M. R., Wagner I., Holtschulte H., Cement-Based Materials (1996) Internal Corrosion of Water Distribution Systems, 2nd Ed. Edited by AWWARF, and DVGW-TZW
  6. Pisigan, R. A. (1992) Inadequacy of Using Recently Reported $C_aCO_3$Saturation Indices for water Corrosivity Evaluation, AWWA WQTC Proc., pp. 711-721
  7. Boissonneault, P. (1994) Dissolved Inorganic Carbon A Key to Corrosion Control in Low Alkalinity Waters, AWWA WQTC Proc., pp. 1693-1710
  8. Edwards, M., et al (1994) Inorganic Anions and Copper Pitting, Jour. Science and Engineering Corrosion, 50(5)
  9. Edwards, M., Reiber, S., Schecher, W. D. (1997) Control of Pb and Cu Corrosion By-Products Using CORRODE Software, AWWARF
  10. EPA (1992) Lead and Copper Rule Guidance Manual
  11. Ferguson, J. F., Korshin, G. V., Perry, S. A. (1993) Evaluation of Water Quality Effects on Corrosion of Copper and Lead-Tin Solder in Portland Water, AWWAWQTC Proc., pp. 1481-1499
  12. Pisigan,, R. A. and Singley, J. E. (1985) effect of Water Quality Parameters on the Corrosion of Galvanized Steel, J. AWWA, 77(11), pp. 76-82
  13. Schock, M. R. (1990) Internal Corrosion and Deposition Control in Water Quality and Treatment, J. AWWA, pp. 999-1111
  14. Tseng, T., Segal, D., Edwards, M.(2000) Increasing Alkalinity to Reduce Turbidity, J. AWWA, 92(6), pp. 44-54
  15. EPA (1992) Lead and Copper Rule Guidance Manual, Vol. Ⅱ, Corrosion Control Treatment
  16. 환경부 (2007) 상수도시설기준 유지관리지침