• Archives of Pharmacal Research
• /
• v.17 no.5
• /
• pp.309-313
• /
• 1994

Phytase of rat intestine had a large amount of oilgosacchanrides ; The enzyme consisted of two different subunits with the molecular weights of 90 KDa and 70 KDa in its intack form, whereas the apparent molecular weights tumed to 72 KDa and 52 KDa, respectively, after deglycosylation. The treatment with glycopeptidase F reduced the molecular weights from 90 KDa and 70 KDa to 83 KDa and 52 KDa, respectively, While endoglycosidase H caused no change in their molecular weights. These results indicate that the 70KDa subunit contains only the N-linked oilgosaccharide chains, while the 90KDa subunit ocntains O-linked oilgosaccharides as well as N-linked ones. Enzyme-linked lectin assays suggeted that bisecting N-acetyl-D-glucosamine and galactose 1-4 N-acetyl-D-glucosamine structures were present and that fucose was included in these oilgosaccharide moieties. Sialic acid was not found in either subunit.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.156-160
• /
• 2003

Poly(ethylene 2,6-naphthalate) (PEN)/Poly(ethylene glycol) (PEG) copolymers were synthesized by two step reaction during the melt copolymerization process. The first step was the esterification reaction of dimethyl-2,6-naphthalenedicarbox-ylate (2,6-NDC) and ethylene glycol (EG). The second step was the condensation polymerization of bishydroxyethylnaphthalate (BHEN) and PEG. The copolymers contained 10 mol% of PEG units with different molecular weights. Structures and thermal properties of the copolymers were studied by using $^1{H-NMR}$, DSC, TGA, etc. Especially, while the intrinsic viscosities of PEN/PEG copolymers increased with increasing molecular weights of PEG, but the glass transition temperature, the cold crystallization temperature, and the weight loss temperature of the copolymers decreased with increasing molecular weights of PEG. Consequently, the hydrophilicities by means of contact angle measurement and moisture content of the copolymer films were found to be significantly improved with increasing molecular weights of PEG.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.465-468
• /
• 1995

Matrix assisted laser desorption ionization in mass spectrometry is a fast and accurate method to determine the molecular weight of natural and synthetic polymers. Unknown peptides such as elastase inhibitor and $\small{D}$-hydantoinase were analyzed using sinapinic acid as matrix and their molecular weights were compared with the results from protein sequencer and gel filtration chomatography, respectively. Synthetic polymers such as polyethyleneglycol, polypropyleneglycol, polydimethylsiloxane, and polystyrene were analyzed using matrices such as 2,5-dihydroxybenzoic acid, 4-hdroxyazobenzenecarboxylic acid, and 2-nitrophenyl octyl ether. Average molecular weights of polystyrene were compared with molecular weights by gel permeation chromatography.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.11
• /
• pp.1323-1328
• /
• 1999

Interdiffusion between two partially miscible polymers of similar chemical structures with different molecular weights is characterized theoretically by using the reptation model for the interdiffusion. This model provides more reliable results than the early Rouse model for same molecular weights, compared with the experiments. Furthermore, by introducing the molecular weight ratio R into the reptation model, we can see the dynamic effect of molecular weight on the diffusion behaviors of the asymmetric system. Near the critical point the diffusion behaviors of asymmetric binary polymer mixtures are well characterized by the interfacial width W(t), the mass transport M(t) for the different values of the Flory Χ parameter and different molecular weight ratios ofpolymers of the diffusion couple. These two quantities and composition profiles by this model give betteragreement with experiments.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.317-323
• /
• 2004

This study was performed to investigate the antimicrobial effects of hetero-chitosans and their oligosaccharides against three Gram-negative bacteria and five Gram-positive bacteria. Nine classes of hetero-chitosan oligosaccharides consisted of partially deacetylated chitosans; 90％, 75％, and 50％ deacetylated chitosans. Based on molecular weight, they were prepared using an ultrafiltration membrane reactor system. Seventy-five percent deacetylated chitosan showed the highest antimicrobial acitivity as compared with the 90％ and 50％ deacetylated chitosan, and the activity was dependent on their molecular weights. It was apparent that the growth of Gram-negative bacteria is less inhibited in the presence of the heterochitosans and their oligosaccharides than Gram-positive bacteria. These results revealed that the antimicrobial effects of hetero-chitosans and their oligosaccharides depend on the degree of deacetylation, and their molecular weights.

• Bulletin of the Korean Chemical Society
• /
• v.5 no.4
• /
• pp.140-145
• /
• 1984

A theory is given for determining the molecular weights of block copolymers from the experimental elution volume in GPC. Interaction effect between a sample of block copolymer and a column packing material as well as the size effect are separately considered for the first time applying the partial exclusion mechanism proposed by Dawkins. The molecular weight determination shows 6${\%}$ standard-deviation from the molecular weights measured by an osmometric method for eight block copolymers, which is much more improved result than other methods, e.g., the universal plot method (13 ${\%}$) and the Runyon's method (12 ${\%}$). The reason which explains the better result is that our theory takes into account the interaction effect correctly.

• Journal of fish pathology
• /
• v.28 no.3
• /
• pp.133-143
• /
• 2015

The antigenic proteins of Lymphocystis disease virus (LCDV) from tumors of olive flounder, Paralichthys olivaceus, are described following characterization by mass spectrometry. In SDS-PAGE, predominant protein bands were observed at 114, 88, 70, 54, 52, 47, 42 and 24 kDa. Western blot analysis showed that antisera reacted strongly at molecular weights of 114, 67 and 54 kDa, and reacted weakly at molecular weights of 74, 70, 36, 24 and 22 kDa. In the identification of LCDV antigenic proteins by matrix-assisted laser desorption ionization (MALDI) TOF mass spectrometry, 10 of 14 excised bands consisted mostly of proteins with amino acid sequences that matched LCDV-C (lymphocystis disease virus isolate China) ORFs. Strong antigens with molecular weights of 114, 67 and 54 kDa were identified as LDVICp236 (chromosome segregation ATPase), LDVICp033 (membrane bound metallopeptidase) and LDVICp157 (hypothetical protein), respectively. Minor antigens with molecular weights of 70, 36, 24 and 22 kDa proteins were identified as LDVICp160 (acetyl-coA hydrolase), LDVICp213 (hypothetical protein), LDVICp039 (hypothetical protein) and LDVICp213 (hypothetical protein). However, the major capsid protein (LDVICp043) did not react with the polyclonal antibody.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.4
• /
• pp.543-551
• /
• 2021

Changes in gluten surface hydrophobicity, which play an important role in the functional characteristics of protein, were measured according to various protein concentrations, pH levels, electrolytes concentrations, and alginate molecular weights using 8-anilino-1-naphthalene sulfonic acid (ANS) as a fluorescent probe. Gluten surface hydrophobicity decreased as gluten concentration increased, reaching a maximum pH of 7.0. The effects of alginate molecular weights and alginate concentration on the surface hydrophobicity, emulsifying activity index (EAI), and emulsion stability index (ESI) of gluten-sodium alginate dispersion (GAD) were measured. Gluten surface hydrophobicity rapidly increased the asl NaCl concentration of gluten solution up to 300 mM and showed no significant increase above 300 mM. However, gluten surface hydrophobicity notably decreased until the concentration of CaCl₂ and MgCl₂ reached 30 mM, indicating no significant variations above 30 mM. GAD surface hydrophobicity increased as the concentration and molecular weight of sodium alginate increased, however, gluten concentration increased as the GAD surface hydrophobicity decreased. The EAI and ESI of GAD increased as both molecular weight and concentration of sodium alginate increased.

• Archives of Pharmacal Research
• /
• v.9 no.1
• /
• pp.5-9
• /
• 1986

Partialy purified ginseng proteins were either treated with sodium dodecyl sulfate (SDS) and .betha.-mercaptoethanol to denature the proteins or not, and subjected to Thin Layer Chromatography (TLC) and High Performance Liquid Chromatography (HPLC) to compare the components of each fraction. Standard proteins of known molecular weights (MW) were also either treated with SDS and .betha.-mercaptoethanol or not, and subjected to HPLC to obtain regression lines for MW determination. From the retention times obtained from samples in eiether case by HPLC, the MW were estimated as following in SDS treated condition, Gl fraction showed three peaks each with MW of above 100, 000, 51, 000 and 19, 000. Gll showed one original peak with MW of 21, 000 and Gll, two peaks each with MW of 19, 000 and 14, 000. On the other hand, in non-SDS treated condition, GI fraction showed two peaks each with MW of above 200, 000 NA 52, 000. Gll showed one original peak with MW of 41, 000 and Gill, three peaks each with MW of 28, 000, 19, 000 and 14, 000.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.12
• /
• pp.1310-1314
• /
• 1998

The oligo(methylsilene) (1) was treated with the group 4 metallocene Cp2MCl2/Red-Al (M = Ti, Zr, Hf) combination catalysts and with the group 6 metal carbonyl M(CO)6 (M = Cr, W) catalysts, producing the modified, cross-linked polymers. The average molecular weights and percent ceramic residue yields of modified polymers increase as the catalyst goes down from Ti to Hf and similarly as the catalyst goes down from Cr to W. An interrelationship between average molecular weights and percent ceramic residue yield is found within the respective group of catalysts, but is not observed as the catalyst goes down from Ti to W. The polymers modified with the group 4 metallocene combination catalysts have higher molecular weights and similar percent ceramic residue yields as compared to the polymers modified with the group 6 metal carbonyl catalysts. The catalytic activities of group 4 metallocene combinations appear to be higher -100 ℃, but to be lower at very high temperature than those of group 6 metal carbonyls.