• 제목/요약/키워드: molding Analysis

검색결과 886건 처리시간 0.029초

무광부식 패턴을 갖는 자동차 내장부품인 HD Switch Panel의 제조 및 전사성 평가 (Development and transcription estimation of an automotive interior plastic part(HD Switch Panel) with no glossy etching pattern)

  • 김영균;김동학;손영곤
    • 한국산학기술학회논문지
    • /
    • 제10권11호
    • /
    • pp.3280-3286
    • /
    • 2009
  • 본 논문에서는 미세 무광부식 패턴을 갖는 HD Switch Panel 자동차 부품을 개발하는 것으로, 제품 디자인을 통해 금형을 설계, 제작하였다. 최적화된 금형 제작을 위하여 CAE(Computer Aided Engineering)해석을 통하여 사출성형 공정에서 나타날 수 있는 문제점과 부품의 수축 변형을 정량적으로 예측하였다. 그리고, 금형표면의 가열온도와 실제 금형온도를 비교함으로써 공정변수 조절을 통해 사출성형조건의 최적화도 달성할 수 있었다. 한편, 순간금형표면가열방식을 이용한 성형기술인 E-MOLD를 적용하여 자동차 내장부품용 HD Switch Panel 사출성형품을 제작하였고, 전자현미경과 원자현미경을 이용한 표면 평가 및 광택도 측정을 통하여 무광부식 패턴의 전사율 향상으로 인한 무광 특성이 향상됨(2.5이상$\to$1.5~1.7)을 확인하였다.

창녕 화왕산성 출토 비격진천뢰(飛擊震天雷)의 보존 (Conservation of the Metal ball fired by a cannon)

  • 곽홍인;황정순;유혜선;정광룡
    • 박물관보존과학
    • /
    • 제7권
    • /
    • pp.25-31
    • /
    • 2006
  • 경남 창녕군 화왕산성에서 발굴된 비격진천뢰의 보존처리를 실시하였다. 비격진천뢰는 일부 결실된 상태였다. 단, 결실된 부분은 내부를 관찰할 수 있도록 복원처리를 실시하지 않았다. X-선 투과검사 및 C.T(Computed Tomography)촬영 결과 주조과정에서 주형선 주위에 기공이 많이 발생한 것을 확인할 수 있었고, 표면에는 주조시 내범을 유지하기 위한 형지공이 확인되었으며, 이 부분에 다시 철판을 덧대어 보강한 흔적도 확인할 수 있었다. 표면에 존재하는 청색 부식물의 주성분은 SEM/EDS 분석결과 산소(O), 철(Fe), 인(P), 규소(Si), 알루미늄(Al)이라는 것을 확인하였으며, XRD 분석결과 청색 부식물은 비비아나이트[vivianite, Fe3(PO4)2·8H2O]로 확인되었다. 그리고 미세조직 분석결과 전형적인 회주철조직으로 판명되었다.

CuO nanoparticle 및 fiber 로 구성된 PPS 복합재료의 sliding 조건하의 transfer film 에관한 연구 (Study of transfer film in the sliding of nanoscale CuO-filled and fiber-reinforced polyphenylene sulfide (PPS) composites)

  • 조민행;;박혜영;김윤준
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.967-972
    • /
    • 2004
  • The role of transfer films formed during sliding of polymer composites against steel counterfaces was studied in terms of the tribological behaviors of composites. Four kinds of composites were included in this study: (1) unfilled PPS, (2) PPS+2%CuO, (3) PPS+2%CuO+5% carbon fiber (CF), and (4) PPS+2%CuO+15%Kevlar. The filler material CuO was in nanoscale particulate form and the reinforcing material was in the form of short fibers. The composites were prepared by compression molding at $310^{\circ}C$ and sliding tests were run in the pin-on-disk sliding configuration. The counterface was made of tool steel hardened to 55-60 HRC and finished to a surface roughness of 0.09-0.10 ${\mu}m$ Ra. Wear tests were run for 6 hrs at the sliding speed of 1 m/s and contact pressure of 0.65 MPa. Transfer films formed on the counterfaces during sliding were investigated using AFM and SEM. The results showed that as the transfer film became smooth and uniform, wear rate decreased. PPS+2%CuO+15%Kevlar composite showed the lowest steady state wear rate in this study and its transfer film showed the smoothest and the most uniform characteristics. The examination of worn surfaces of PPS+2%CuO composite using X-ray area scanning (dot mapping) showed back-transfer of steel counterface material to the polymer pin surface. This behavior is believed to strengthen the polymer pin surface during sliding thereby contributing to the decrease in wear rate.

  • PDF

경화제 변화에 따른 WLP(Wafer Level Package)용 신규 Epoxy Resin System의 경화특성 (Cure Properties of Novel Epoxy Resin Systems for WLP (Wafer Level Package) According to the Change of Hardeners)

  • 김환건
    • 반도체디스플레이기술학회지
    • /
    • 제21권2호
    • /
    • pp.57-67
    • /
    • 2022
  • The curing characteristics of naphthalene type epoxy resin systems according to the change of curing agent were investigated to develop a new next-generation EMC(Epoxy Molding Compound) with excellent warpage characteristics, low thermal expansion, and excellent fluidity for WLP(Wafer Level Package). As epoxy resins, DGEBA, which are representative bisphenol type epoxy resins, NE-16, which are the base resins of naphthalene type epoxy resins, and NET-OH, NET-MA, and NET-Epoxy resins newly synthesized based on NE-16 were used. As a curing agent, DDM (Diamino Diphenyl Methane) and CBN resin with naphthalene moiety were used. The curing reaction characteristics of these epoxy resin systems with curing agents were analyzed through thermal analysis experiments. In terms of curing reaction mechanism, DGEBA and NET-OH resin systems follow the nth curing reaction mechanism, and NE-16, NET-MA and NET-Epoxy resin systems follow the autocatalytic curing reaction mechanism in the case of epoxy resin systems using DDM as curing agent. On the other hand, it was found that all of them showed the nth curing reaction mechanism in the case of epoxy resin systems using CBN as the curing agent. Comparing the curing reaction rate, the epoxy resin systems using CBN as the curing agent showed a faster curing reaction rate than them with DDM as a hardener in the case of DGEBA and NET-OH epoxy resin systems following the same nth curing reaction mechanism, and the epoxy resin systems with a different curing mechanism using CBN as a curing agent showed a faster curing reaction rate than DDM hardener systems except for the NE-16 epoxy resin system. These reasons were comparatively explained using the reaction rate parameters obtained through thermal analysis experiments. Based on these results, low thermal expansion, warpage reduction, and curing reaction rate in the epoxy resin systems can be improved by using CBN curing agent with a naphthalene moiety.

Analysis of the trueness and precision of complete denture bases manufactured using digital and analog technologies

  • Leonardo Ciocca;Mattia Maltauro;Valerio Cimini;Lorenzo Breschi;Angela Montanari;Laura Anderlucci;Roberto Meneghello
    • The Journal of Advanced Prosthodontics
    • /
    • 제15권1호
    • /
    • pp.22-32
    • /
    • 2023
  • PURPOSE. Digital technology has enabled improvements in the fitting accuracy of denture bases via milling techniques. The aim of this study was to evaluate the trueness and precision of digital and analog techniques for manufacturing complete dentures (CDs). MATERIALS AND METHODS. Sixty identical CDs were manufactured using different production protocols. Digital and analog technologies were compared using the reference geometric approach, and the Δ-error values of eight areas of interest (AOI) were calculated. For each AOI, a precise number of measurement points was selected according to sensitivity analyses to compare the Δ-error of trueness and precision between the original model and manufactured prosthesis. Three types of statistical analysis were performed: to calculate the intergroup cumulative difference among the three protocols, the intergroup among the AOIs, and the intragroup difference among AOIs. RESULTS. There was a statistically significant difference between the dentures made using the oversize process and injection molding process (P < .001), but no significant difference between the other two manufacturing methods (P = .1227). There was also a statistically significant difference between the dentures made using the monolithic process and the other two processes for all AOIs (P = .0061), but there was no significant difference between the other two processes (P = 1). Within each group, significant differences among the AOIs were observed. CONCLUSION. The monolithic process yielded better results, in terms of accuracy (trueness and precision), than the other groups, although all three processes led to dentures with Δ-error values well within the clinical tolerance limit.

헬리콥터 착륙장치를 위한 복합재 토크링크의 설계에 대한 연구 (Study on design of the composite torque link for a landing gear system of a helicopter)

  • 김진봉;엄문광;이상용;김태욱;신정우
    • Composites Research
    • /
    • 제22권2호
    • /
    • pp.30-36
    • /
    • 2009
  • 본 논문에서는 헬리콥터 착륙장치를 위한 복합재료 토크링크를 개발하기 위한 설계 기법을 제시하였다. 복합재 토크링크는 헬리콥터 착륙장치의 충격흡수부의 정렬을 위해 장착되는 장치로서 가벼우면서도 강성이 커서 외부하중에 대해 최소의 변형량을 가져야 한다. 또 가격적인 측면을 고려한 복합재 구조물 제조 공정(RTM: 수지충전공정)이 반영되어 대량생산이 가능한 구조 및 형태를 가져야 한다. 본 논문에서는 복합재 구조물 제조 공정과 동일한 공정으로 시편을 제작하여 설계에 필요한 기계적 특성을 얻었으며, 유한요소해석을 통하여 복합재 토크링크에 대한 최적 형상설계를 수행하였다. Lug 형태를 가지는 두꺼운 복합재료 구조물인 복합재료 토크링크의 설계를 위해서는 ABAQUS의 3D Layered Solid 요소로 구성된 유한요소모델을 활용하여 복합재료의 두께방향을 포함한 강도해석을 수행하였으며, Rigid-Deform 구속조건의 접촉문제를 고려한 비선형 정적 해석을 반복적으로 수행하여 주어진 정강도 요구조건을 만족시키는 복합재 토크링크를 설계하였다.

Ti-Mo 코어-쉘 분말 제조 및 소결 특성 연구 (Fabrication of Ti-Mo Core-shell Powder and Sintering Properties for Application as a Sputtering Target)

  • 이원희;박천웅;김희연;하윤철;변종민;김영도
    • 한국분말재료학회지
    • /
    • 제31권1호
    • /
    • pp.43-49
    • /
    • 2024
  • In this study, a core-shell powder and sintered specimens using a mechanically alloyed (MAed) Ti-Mo powder fabricated through high-energy ball-milling are prepared. Analysis of sintering, microstructure, and mechanical properties confirms the applicability of the powder as a sputtering target material. To optimize the MAed Ti-Mo powder milling process, phase and elemental analyses of the powders are performed according to milling time. The results reveal that 20 h of milling time is the most suitable for the manufacturing process. Subsequently, the MAed Ti-Mo powder and MoO3 powder are milled using a 3-D mixer and heat-treated for hydrogen reduction to manufacture the core-shell powder. The reduced core-shell powder is transformed to sintered specimens through molding and sintering at 1300 and 1400℃. The sintering properties are analyzed through X-ray diffraction and scanning electron microscopy for phase and porosity analyses. Moreover, the microstructure of the powder is investigated through optical microscopy and electron probe microstructure analysis. The Ti-Mo core-shell sintered specimen is found to possess high density, uniform microstructure, and excellent hardness properties. These results indicate that the Ti-Mo core-shell sintered specimen has excellent sintering properties and is suitable as a sputtering target material.

생육환경 분석을 통한 서울·인천·경기지역 천연기념물 노거수의 관리방안 (Management Guidelines on the Large Old Trees as the Natural Monuments in Seoul, Incheon, and Gyeonggi Province through the Analysis of the Growing Environment)

  • 이승제
    • 헤리티지:역사와 과학
    • /
    • 제42권1호
    • /
    • pp.88-99
    • /
    • 2009
  • 본 연구는 우리나라 노거수의 생육환경의 악화 및 훼손에 따른 관리방안을 제시하기 위하여 천연기념물 노거수의 생육환경을 분석함으로서 과학적인 보호관리대책을 수립하기 위한 목적으로 실시하였다. 연구대상지는 서울, 인천, 경기 지역의 천연기념물 노거수 20주를 대상으로 개체별 특성을 파악하였다. 생물학적 특성은 수종명, 수령, 수고, 근원둘레 4개항목을 조사하고, 입지현황은 입지유형, 입지환경의 2개 항목, 근원부 성상은 나지화, 복토깊이의 2개 항목, 건강도는 고사지율, 공동크기, 수피이탈율, 병충해, 신초생장의 5개 항목, 토양환경은 토양 pH, 유기물함량, 유효인산, 치환성양이온(K, Ca), 토양경도의 6개 항목으로 설정되었다. 이와 같은 조사항목별 현황조사 결과를 토대로 노거수의 입지현황과 생육환경 및 토양환경과의 상호관련성을 파악하기 위하여 상관관계 분석을 실시하여 노거수의 건강에 가장 영향을 끼치는 인자를 구명하고, 이에 따른 과학적인 관리방안을 제시하고자 하였다. 조사항목별 현장조사 결과 생물학적 특성에 있어서는 천연기념물 노거수는 백송(4주), 은행나무(3주), 향나무(3주), 다래, 등나무, 측백나무, 굴참나무, 탱자나무(2주), 회화나무, 느티나무, 물푸레나무, 소나무로 12종로 분포하였으며, 수고는 4.2~39.2m, 근원둘레 1.01~15.2m이었다. 입지현황은 건물내부형(4주), 유적지형(5주), 주택지형, 들판형, 동산형이 각 3주, 하천 및 해변형이 각 1주로 구분되었으며, 생육환경의 나지화 정도에 있어서는 조사지역 중 75%가 나지화가 진행된 상태이며, 복토깊이는 복토되지 않은 지역 4주(25%)를 제외하고 10cm 이상 복토가 이루어졌다. 건강도에 있어서 첫째, 고사지율은 용문사 은행나무 20%, 강화군 사기리 탱자나무 5%였으며, 그 외 지역은 관리가 이루어져 고사지가 발생되지 않은 상태이었다. 둘째, 공동크기에 있어서는 전 조사지역에서 $5{\sim}100cm^3$로 공동이 발생하였으며, 셋째, 수피이탈율에 있어서는 5~50%로서 공동발생이 높은 서울지역의 수송동 백송 및 문묘의 백송, 삼청동 등나무, 강화군 사기리 탱자나무가 45%로 높은 수피이탈율을 나타내었다. 넷째, 병해충의 피해는 인위적인 관리가 이루어지고 있어 경미한 상태이었으며, 다섯째, 신초생장에 있어서 창덕궁, 선농당 향나무의 신초생장이 1/2로서 주변 대기오염의 영향을 받고 있는 것으로 사료되었으며, 파주 적성면의 물푸레나무, 이천 백사 도립리의 소나무는 신초의 생장상태가 양호하여 근원부 복토가 되지 않아 신초생장에 영향을 미치는 것으로 사료되었다. 토양환경에 있어서 토양 pH 5.2~8.3, 유기물함량 및 유효인산이 각각 12~56%, 104~618ppm으로서 토양의 시비 관리가 이루어지고 있는 것으로 파악할 수 있었다. 토양경도에 있어서는 7~28mm이었으며, 조사대상 중 수송동의 백송, 삼청동의 측백나무, 문묘 은행나무, 용문사 은행나무 지역은 토양경도 21~28mm로 나지화 현상이 심하게 나타나고 있었다. 이러한 조사결과를 토대로 상관관계분석을 실시하였는데, 복토깊이가 수목의 생육에 커다란 영향을 미치는 것으로 분석되었으며, 향후 세부적인 자료구축을 통한 상관관계성 규명이 필요할 것으로 사료되었다. 본 연구를 통하여 노거수의 주변환경으로 건물, 시설지의 제한적인 관리 및 규제 등을 통한 인위적인 영향을 최소화하고 노거수의 양호한 생육을 위한 복토제거 등 근권확보가 필요할 것으로 사료되었다. 이와 같은 노거수 환경에 따른 문제점을 극복하고, 지속적인 관리시스템 구축을 위하여 동일 수종별 객관적인 비교, 분석을 통한 적정한 생육환경 조성 방안의 구축이 필요하며, 지속적인 모니터링을 생육의 피해현상 및 토양환경과의 지속적인 데이터축적을 통하여 관리 시스템의 정립이 이루어져야 할 것이다.

청동잔무늬거울의 복원제작기술과 과학적 분석 (The Restoration Technology and Scientific Analysis of Bronze Mirror with Fine Linear Designs)

  • 윤용현;조남철
    • 보존과학회지
    • /
    • 제28권4호
    • /
    • pp.417-425
    • /
    • 2012
  • 청동기시대 청동잔무늬거울은 당대 최고의 합금, 주조기술과 최고 경지의 수공예 세공기술, 조형 수준을 보여주는 것으로, 이번에 시도된 국보 제141호와 제143호 청동잔무늬거울의 복원 제작기술에는 밀랍주조법과 주물사주조법을 사용하였다. 또한 복원된 청동잔무늬거울을 대상으로 주성분분석, 미세조직, X-ray 촬영, SEM-EDS 분석을 실시하였다. 주물사주조법으로 주조한 청동거울은 내부의 공석상은 거의 존재하지 않는 ${\alpha}$ 수지상조직만이 관찰되며, 밀랍주조법의 경우는 ${\alpha}$ 수지상 사이로 공석상이 존재함을 확인할 수 있다. 복원 청동거울 분석을 통한 밀랍주조법과 주물사주조법을 상호 비교해 보면 대체로 주물사주조법이 밀랍주조법에 비하여 주조성이 좋고 냉각속도가 늦어 더 선명하고 균일한 청동거울을 얻을 수 있는 것으로 보인다. 이상과 같이 밀랍주조법과 주물사주조법으로 주조한 청동거울은 서로 큰 차이가 있음을 복원한 청동거울들과 미세조직 분석을 통하여 확인할 수 있었다. 앞으로도 이러한 연구가 계속적으로 진행되어 고대 청동거울들의 제작기법을 다양한 방법으로 규명할 수 있는 기회가 되었으면 한다.

드럼세탁기용 커플링 부품 다이캐스팅 금형개발 (Development of Mold for Coupling Parts for Drum Washing Machine)

  • 박종남;노승희;이동길
    • 한국산학기술학회논문지
    • /
    • 제21권6호
    • /
    • pp.482-489
    • /
    • 2020
  • 본 연구의 목적은 소비자 및 현장의 니즈에 부합하면서 다이캐스팅으로 생산할 수 있는 커플링 부품을 개발하고자 하였으며, 유동 및 응고해석을 기반으로 다이캐스팅 금형 설계, 제작, 및 사출조건 최적화 도출을 실시하였고 사출된 제품의 측정 및 평가를 수행하였다. 유동해석을 통하여 캐비티 내부가 100 % 충진되기 위한 적정한 사출조건은 용탕의 온도 670 ℃, 사출속도 1.164 m/s, 충진압력 6.324~18.77 MPa로 분석되었다. 또한, 응고율이 69.47 %일 때 4개의 캐비티 모두에서 100 %에 근접하는 응고가 발생됨을 알 수 있었으며, 이를 기초로 시사출 조건설정 등에 응용하였으며 그 결과 사이클 타임은 약 6.5초로 도출되었다. 다이캐스팅으로 시사출된 제품의 표면 및 내부의 품질 검사를 수행한 결과 성형불량 및 기공 등의 결함은 전혀 발견되지 않았으며, 주요 개소의 치수를 측정한 결과 모든 항목에서 허용하는 공차 이내의 값을 보였다. 또한, 게이트로부터 약 45 mm 이격된 곳의 평균 경도값은 97.7(Hv)로 나타나는 등 전체적으로 양호한 치수 및 품질의 부품을 제작할 수 있었다.