Objective: To evaluate the effect of lactic acid bacteria and storage temperature on the microbial, chemical and mycotoxin composition of corn silage. Methods: Corn was harvested at 32.8% dry matter, and chopped to 1 to 2 cm. The chopped material was subjected to three treatments: i) control (distilled water); ii) $1{\times}10^6$ colony forming units (cfu)/g of Lactobacillus plantarum; iii) $1{\times}10^6cfu/g$ of Pediococcus pentosaceus. Treatments in triplicate were ensiled for 55 d at $20^{\circ}C$, $28^{\circ}C$, and $37^{\circ}C$ in 1-L polythene jars following packing to a density of approximately $800kg/m^3$ of fresh matter, respectively. At silo opening, microbial populations, fermentation characteristics, nutritive value and mycotoxins of corn silage were determined. Results: L. plantarum significantly increased yeast number, water soluble carbohydrates, nitrate and deoxynivalenol content, and significantly decreased the ammonia N value in corn silage compared with the control (p<0.05). P. pentosaceus significantly increased lactic acid bacteria and yeast number and content of deoxynivalenol, nivalenol, T-2 toxin and zearalenone, while decreasing mold population and content of nitrate and 3-acetyl-deoxynivalneol in corn silage when stored at $20^{\circ}C$ compared to the control (p<0.05). Storage temperature had a significant effect on deoxynivalenol, nivalenol, ochratoxin A, and zearalenone level in corn silage (p<0.05). Conclusion: Lactobacillus plantarum and Pediococcus pentosaceus did not decrease the contents of mycotoxins or nitrate in corn silage stored at three temperatures.
Lee, Dae-Young;Nam, Jung-Gun;Han, Kang-Soo;Yeo, Yun-Jong;Lee, Useung;Cho, Sang-Hwan;Ok, Jong G.
Advances in nano research
/
v.13
no.2
/
pp.199-206
/
2022
We present the high-brightness large-area 10.1" in-cell polarizer display panel integrated with a wire grid polarizer (WGP) and metal reflector, from the initial design to final system development in a commercially feasible level. We have modeled and developed the WGP architecture integrated with the metal reflector in a single in-cell layer, to achieve excellent polarization efficiency as well as brightness enhancement through the light recycling effect. After the optimization of key experimental parameters via Taguchi method, the roll nanoimprint lithography employing a flexible large-area tiled mold has been utilized to create the 90 nm-pitch polymer resist pattern with the 54.1 nm linewidth and 5.1 nm residual layer thickness. The 90 nm-pitch Al gratings with the 51.4 nm linewidth and 2150 Å height have been successfully fabricated after subsequent etch process, providing the in-cell WGPs with high optical performance in the entire visible light regime. Finally we have integrated the WGP in a commercial 10.1" display device and demonstrated its actual operation, exhibiting 1.24 times enhancement of brightness compared to a conventional film polarizer-based one, with the contrast ratio of 1,004:1. Polarization efficiency and transmittance of the developed WGPs in an in-cell polarizer panel achieve 99.995 % and 42.3 %, respectively.
This research aimed to examine the effects of grapefruit seed extract (GSE) at various concentrations on the microbial safety and physicochemical characteristics of onion puree (0.01~0.1%). The onion puree was kept at 4℃ for 14 days. The results of the study indicated that the addition of GSE did not cause any significant changes in the sample's brix degree and viscosity in onion puree (p<0.05). However, as the concentration of GSE increased, the pH level decreased. On the other hand, as GSE was added, the lightness of the onion puree increased, while the redness and yellowness decreased. Compared to pure onion puree, the GSE-incorporated onion puree had higher levels of total flavonoid and total polyphenol content, indicating that it helps to maintain antioxidant activities. Based on the microbial safety test, aerobic bacteria, yeast, and mold were absent until day 14 of storage. In conclusion, the study suggests that the addition of GSE to onion puree increases its antioxidant activity and shelf-life.
Journal of the Korea Academia-Industrial cooperation Society
/
v.13
no.6
/
pp.2458-2464
/
2012
Recently, component materials for display are being developed into higher value-added industries which can strengthen national industrial competitiveness. However, a system for production of component materials for display is nearly depending on import, and its development level is inadequate. For this reason, localization of the embossing treatment system for production of the spacer tape and system improvement for increasing of productivity are needed. Therefore, in this paper, we propose rotary type embossing process system for spacer tape production for localization of system and increasing productivity. The system consists of unwinding, forming, cleaning, winding and testing parts. The mold of forming part is designed to rotary type. And we designed each part and made a prototype to test its performance. We measured embossing shapes, diameter and distance between each embossing and opposite embossing using three coordinate measuring machine. Also, we measured impurity level and the number of impurity particles of sample through the testing and cleaning part. Additionally, the productivity of spacer tape produced by the prototype is measured.
The effects of vinegar, alcohol, and vitamin C on the color, microorganism count, volatile flavor components, free sugar level, free amino acid concentration, and free fatty acid level of minced ginger were investigated during storage for 17 weeks at $10^{\circ}C,\;20^{\circ}C\;or\;30^{\circ}C$. Bacterial levels remained unchanged during storage and mold was not initially detected. Yeast levels in minced ginger were $5{\times}10^1$ CFU/g initially, and yeast was not detected after 2 weeks. The color values increased during storage at high temperature. The volatile flavor component levels decreased during high-temperature storage. The free sugars of minced ginger were glucose, sucrose, and fructose. Sugar levels did not vary greatly with storage temperature. Free amino acid content decreased during high-temperature storage, and glutamine, valine, alanine, asparagine, tyrosine, and leucine were detected. Free fatty acid content increased during storage and the ratio of unsaturated to saturated fatty acids was 3:7.
1,225 healthy day-old avian broiler chicks were used to investigate the effects of activated charcoal (AC, made from willow tree), hydrated sodium calcium aluminosilicates (HSCAS) and esterified glucomannan (EGM) supplementation on broiler performance, blood profiles and meat characteristics when less moldy or moldy corn was included to formulate seven isocaloric and isonitrogenous diets: Positive Control (less moldy corn diet, PC), PC+2% AC, Negative Control (moldy corn, NC), NC+0.05% EGM, NC+0.1% EGM, NC+0.5% HSCAS and NC+1% AC. PC+2% AC resulted in lower growth rate, poorer feed conversion ratio (FCR), more leg problems and higher mortality of birds than those fed PC diet (p<0.05). Inclusion of 0.05% EGM, 0.1% EGM, 0.5% HSCAS and 1% AC in NC diet did not improve average daily weight gain (ADG) or affect feed intake of birds during the first or the second three-week periods. However, 0.05% EGM tended to (p>0.05) and 0.1% EGM significantly (p<0.05) improved FCR during the first three-week period. Breast meat of NC birds had higher Minolta $L^*$ values (white) but lower $a^*$ (reddish) and $b^*$ (yellowish) values (p<0.01) than the PC birds. Addition of 0.05% EGM and 0.1% EGM in NC diet reduced the $L^*$ values (p<0.05), improved $a^*$ and $b^*$ values (p<0.05) of breast meat of birds fed NC diet, but had no effect on meat color when 0.5% HSCAS or 1% AC was included (p>0.05). Relative weight of liver to body was reduced by feeding NC diet (p<0.05) and could not be normalized by different mycotoxin adsorbents (p>0.05) to the ratio of the PC birds. Relative weight of cholecyst of NC birds was increased compared with PC birds and could only be normalized by addition of 0.05% EGM and 1% AC (p<0.05) in NC diet. NC birds had lower serum albumin level than the PC birds (p<0.05) and addition of 0.05% EGM or 1% AC in NC diet did normalize serum albumin level. Addition of 0.5% HSCAS in NC diet further reduced serum albumin, globulin, total protein and uric acid levels (p<0.05). It was concluded that lower FCR during the first three-week period of growth and deterioration of meat quality observed in bird fed moldy corn with moderate T2 and fuminisin contamination and damaged nutrients and pigment availability, might be improved by dietary supplementation of 0.05% to 0.1% EGM, but not by 1% AC or 0.5% HSCAS supplementation.
Seo, Sang Young;Cho, Jong hyeon;Kim, Chang Su;Kim, Hyo Jin;Kim, Dong Won;An, Min Sil;Yoon, Du Hyeon
Proceedings of the Plant Resources Society of Korea Conference
/
2019.10a
/
pp.45-45
/
2019
This experiment was carried out using artificial clay and LED in the plastic film house (irradiation time: 08:00~18:00/day). Seedlings (n = 63 per $3.3m^2$) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity. The average air temperature from April to September was $12.3^{\circ}C$$-26.0^{\circ}C$ and it was the the highest at $26.0^{\circ}C$ in August. The test area where fluorescent lamp was irradiated tended to be somewhat higher than the LED irradiation area. The chemical properties of the test soil are as follows. pH levels was 5.3~5.5, EC levels 0.45~0.52 dS/m and OM levels 33~37%. The total nitrogen content was 0.35~0.47% and the available $P_2O_5$ contents was 13.7~16.0 mg/kg, which was lower than the suitable level of 70~200 mg/kg. Exchangeable cations K and Mg contents were within acceptable ranges, but the Ca contents was $28{\sim}38cmol^+/kg$ levels higher than the permissible level ($2{\sim}6cmol^+/kg$). Germination of ginseng leaves took 8~9 days and the overall germination rate was 70~75%. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PAR (Photosynthetic Action Radiation) value, illuminance and solar irradiation. Photosynthetic rate was also increased with higher light intensity was investigated at $1.7{\sim}3.2{\mu}mol\;CO_2/m^2/s$. Leaf temperature ($23.7{\sim}24.8^{\circ}C$) by light intensity was the same trend. The growth of aerial parts (plant height etc.) were generally excellent when irradiated with 3 times the light intensity, the growth of the ginseng aerial parts were excellent as follows. The plant height was 42.6 cm, stem length was 25.2 cm, leaf length was 9.6 cm and stem diameter was 5.0 mm. The growth of underground part (root length etc.) was the same, and the root length was 24.4 cm, the tap root length was 6.0 cm, diameter of taproot was 18.2 mm and the fresh root weight was 17.2 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping off occurred 2.2~3.6% and incidence ratio of rusty root ginseng was 14.6~20.7%. Leaf discoloration rate was 13.7~48.9% and increased with increasing light intensity. Ginsenoside content of ginseng by light intensity is under analysis.
The dissipation patterns of a boscalid in cucumber under greenhouse condition was investigated to establish pre-harvest residue limit (PHRL) and biological half-life. Initial concentration of boscalid in cucumber at standard application rate was $7.29\;mg\;kg^{-1}$ and decreased to $0.04\;mg\;kg^{-1}$ after 15 days with half-life of 1.9 day, while the initial concentration was $14.69\;mg\;kg^{-1}$ and decreased to $0.11\;mg\;kg^{-1}$ after same period with half lift of 2.0 day at double application rate. PHRL was suggested by prediction curve derived from the decay curve of boscalid at double rate treatment. For example, $10.39\;mg\;kg^{-1}$ was calculated for 10 days before harvest, and $1.73\;mg\;kg^{-1}$ for 5 days. Dilution effect was major factor far the decrease of boscalid residue due to fast increasement of weight of cucumber during cultivation. Final residues level of boscalid was predicted based on the dissipation curve and guideline on safe use, when boscalid was used to control powdery mildew and gray mold. At standard rate application, $1.26\;mg\;kg^{-1}$ and $1.33\;mg\;kg^{-1}$ were calculated as final residue levels for control powdery mildew and gray mold, respectively, which are above the MRL(Meximum Residue Limit).
Journal of the korean academy of Pediatric Dentistry
/
v.29
no.4
/
pp.632-640
/
2002
The objective of the study was to apply the vibration technique to reduce the viscosity of bonding adhesives and thereby compare the bond strength and resin penetration into dentinal tubules achieved with those gained using the conventional technique. Eighty-eight noncarious extracted human permanent molar teeth were sectioned to remove the coronal enamel and were embedded in 1-inch PVC pipe with acrylic resin. The occlusal surfaces were placed so that the tooth and the embedding medium were at the same level to form one flat surface, and the samples were subsequently polished with silicon carbide abrasive papers. The samples were randomly assigned to 4 groups(n=22). On Group 1 and 2, Single Bond(3M-ESPE, St. Paul, USA) was used, and on Group 3 and 4, One-Step(Bisco Inc., Schaumburg, USA) was used, and each was applied according to its manufacturer's instructions. For Group 2 and Group 4, vibration was applied with ultrasonic scaler for 10 seconds, and the adhesive was light-cured for 10 seconds. Resin composite was condensed on to the prepared surface in two increments using a mold kit(Ultradent Products Inc., USA) and each was light-cured for 40 seconds. After 24 hours in tap water at room temperature the specimens were thermocycled, and shear bond strengths were measured with a universal testing machine(Instron 4465, Canton, USA). To investigate infiltration patterns of the adhesive materials, the surface of specimen was examined with scanning electron microscope. The results were as follows. 1. The shear bond strengths of vibration groups(Group 2, Group 4) were significantly greater than those of the non-vibration groups(Group 1, Group 3)(p<0.05). 2. The shear bond strengths of Single Bond and One-Step were not significantly different (p>0.05). 3. The vibration groups showed greater number of resin tags in tubules and lateral branches under SEM.
Park, Ju-Hyun;Hong, Seok-In;Jeong, Moon-Cheol;Kim, Dongman
Food Science and Preservation
/
v.20
no.3
/
pp.304-316
/
2013
To determine the appropriate harvest maturity of mulberry to prolong the freshness during distribution, mulberries were classified into three groups (80%, 90%, and 100%) based on their degree of maturity and then compared for their firmness, color, anthocyanin, soluble solids content, pH, titratable acidity, viable cell, mold and sensory quality. They were then investigated for quality changes by maturity under different distribution temperature at $20^{\circ}C$, $10^{\circ}C$ and $0^{\circ}C$. Immediately after harvest, the 80% matured mulberries were shown to be the firmest and 1.74 and 2.64 times firmer than 90% and 100% matured mulberries respectively. The more mature the mulberries were the lower the "a" value was while anthocyanin content was higher. The soluble solids content and pH of mulberries increased as they matured. Less mature the mulberries were the higher titratable acidity was and lower microbial levels in mulberries were. In terms of sensory quality, color of the 100% matured mulberries was the highest but the 90% matured mulberries were most preferred based on other sensory indexes. In comparison to storability of mulberries by maturity, although the firmness of the 80% matured mulberry decreased rapidly, they were the firmest during distribution periods. The level of mold of the 100% matured mulberries was higher than others. Moreover, the more mature mulberries were the quicker they deteriorated. According to quality indexes, depending on maturity and sensory evaluation of mulberry distributed at different temperatures, the storability of the 80 and 90% matured mulberries were higher than that of the 100% matured mulberries. In conclusion, judging by their sensory quality, the 90% matured mulberries were more appropriate for harvesting than the 80% matured mulberries.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.