• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.393-397
• /
• 2012

We report a new route to synthesize high quality zinc blende CdS and ZnS nanocrystals in noncoordinating solvent 1-octadecene, using dodecanethiol (DDT) molecules as both the sulfur source and surface capping ligands. Different reaction temperatures and Cd(Zn)/DDT molar ratios were tested to optimize the synthesis conditions. Absorption photoluminescence (PL) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) pattern, and transmission electron microscopy (TEM) were used to characterize assynthesized nanocrystals. The narrow half width at the half-maximum on the long wavelength side of the firstexcitonic absorption peak and TEM images demonstrated nearly monodisperse size distributions of asprepared CdS, ZnS, and CdS/ZnS core/shell nanocrystals. Only trap emissions of the nanocrystals were detected when the amount of DDT was excessive, this came from the strong quenching effect of thiol groups on the nanocrystal surfaces. After overcoating with ZnS shells, band-gap emissions of CdS nanocrystals were partially recovered.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.1
• /
• pp.41-48
• /
• 2017

Persulfate (PS) activated with nanosized zero-valent iron (NZVI) was tested as a reagent to remove phenol from groundwater. Batch degradation experiments indicated that NZVI/PS molar ratios between 1 : 2 and 1 : 5 were appropriate for complete removal of phenol, and that the time required for complete removal varied with different PS and NZVI dosages. Chloride ions up to 100 mM enhanced the phenol oxidation rate, and nitrate of any concentration up to 100 mM did not significantly affect the oxidation rate. NZVI showed greater performance than ferrous iron did as an activator for PS. A by-product was formed along with phenol degradation but subsequently was completely degraded, which showed the potential to attain mineralization with the NZVI/PS system. Tests with radical quenchers indicated that sulfate radicals were a predominant radical. The results of this study suggest that NZVI is a promising activator of PS for treating contaminated groundwater.

• Journal of the Korean Ceramic Society
• /
• v.31 no.8
• /
• pp.934-940
• /
• 1994

Fibers of ZrO2-SiO2 system were prepared from the hydrolysis and condensation of Si(OC2H5)4 and Zr(OnC3H7)4 with different H2O/alkoxide molar ratios. It was found that fibers could be drawn in the viscosity range of 1~100 poise from HCl catalyzed solutions with lower water contents of the mole ratio H2O/alkoxide, r 2. The fibrous gels were converted into the corresponding oxide glass fibers by heating at 80$0^{\circ}C$. Mechanical test was performed on E, A and 20ZrO2-80SiO2 glass fibers reinforced cement in order to investigate the flexural strength. The flexural strength value of 20ZrO2-80SiO2 glass fibers reinforced cement was greater than those of E and A. The chemical durability of the fibers in alkaline solutions increased with ZrO2 content. The weight loss due to the corrosion by 2N-NaOH solutions at $25^{\circ}C$ for 160 hours was about 0.31$\times$10-2 mg/dm2 for the 20ZrO2-80SiO2 glass fibers, which was superior to that of Vycor glass.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.459-468
• /
• 2000

To improve the mechanical properties of fiber-reinforced polymer matrix composites, laminated composites plates were fabricated using different matrix resins and glass or aramid fibers. The effect of matrix resin system were evaluated by tensile, flexural strength measurements. In the case of surface treated aramid fiber and unsaturated polyester resin composite, maximum flexural properties were observed in the composite prepared from the glass fiber treated with 0.5 wt% silane coupling agents. Vinylester resin composites show the highest tensile properties and isophthalic polyester composites have the highest flexural properties among the unsaturated polyester resin composites studied. The relationship between overlap laminated composites plates and mechanical properties of polymer composites is also investigated in order to improve mechanical properties of glass fiber and unsaturated polyester resin composites.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1453-1454
• /
• 2011

We have investigated the effect of silicon contents (0~0.4 molar ratios) on the performance of solution processed silicon-indium-zinc oxide (SIZO) thin-film transistors (TFTs). Despites its solution processed channel layer, low annealed temperature below $200^{\circ}C$ in air has been used for SIZO-TFTs. The $V_{th}$ is shifted from -4.04 to 5.15 V as increasing Si ratio in the SIZO-TFTs. The positive shift of $V_{th}$ as increasing Si contents in SIZO system indicates that Si suppresses the carrier generation in the active channel layer since $V_{th}$ is defined as the voltage required accumulating sufficient charge carriers to form a conductive channel path.

• The Korean Journal of Ecology
• /
• v.15 no.4
• /
• pp.355-363
• /
• 1992

Nitrate reductase activity(NRA) and induced NRA were compared in 4 species of moss ctenidium molluscum, homalothecium, tortella tortusa and neckera crispa collected from limestone in england. the NRA and dry weight of the c. molluscum were also measured after spraying with acidic deposition adjusted to ph 5.6, 4.6, 3.6 and 2.8 with one of two molar ratios of nitric to sulfuric acid, i.e. 1:0(N alone) and 1:2(1N+2S) for 20 days. All 4 species showed high NR leavels in the upper part of cut shoots and occurred maximum inducation of NRA within 6h. c. molluscum had the highest NRA levels among 4 species. after daily spraying of acidic deposition, NRA of c. molluscum was increased much more largely at ph 6 and ph 3.6 derived from N alone than from 1N+2S. However that was decreased at ph 2.8 derived both from N alone and 1N+2S . Decline of dry weight had occurred at ph 3.6 and 2.8 derived both from N alone and 1N+2S. Whereas substantial fertilization effect was observed at ph 4.6 derived from N alone. the data suggest that c. molluscum are able to utilize nitrate more effectivery than any other species, and NRA induction are more sensitive than growth response to nitrogen content of acidicdeposition in a short- term. however toxic effects was detected at high $NO_3$ supply and low phacidic deposition.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2113_2114
• /
• 2009

Chalcopyrite based sollar cells have received much attention because of their tunable electronic and optical properties. As a typical ternary chalcopyrite material, $CuInS_2$ has been considered as one of the most popular and promising candidates as absorber materials for photovoltaic applications because of its high absorption coefficient and environmental consideration. In this study, $CuInS_2$ powders have been synthesized using polyol process of a mixture of copper nitrate, indium nitrate, and thiourea with various stoichiometric molar ratios in ethylene glycol at $196^{\circ}C$. As boiling time goes by, the color of metal ion mixed solutions were changed transparent green to dark green and finally turned to black by reduction of OH- radicals. The prepared powders were fully characterized using SEM, XRD. The particle shape of black colored powders showed sphere with about 50 nm in particle size compared to those with dark green colored powders showed irregular shape with about $1{\mu}m$ in particle size. The XRD results showed highly crystallized $CuInS_2$.

• Environmental Engineering Research
• /
• v.23 no.2
• /
• pp.129-135
• /
• 2018

The aim of this study is to assess the applicability of ferrate(VI) in the efficient treatment of aqueous waste contaminated with potassium hydrogen phthalate (KHP) which is known to be a potent endocrine disrupting chemicals. Simulated batch reactor operations were conducted at a wide range of pH (7.0 to 12.0) and molar ratios of KHP to ferrate(VI). Kinetic studies were performed in the degradation process and overall rate constant was found to be 83.40 L/mol/min at pH 8.0. The stoichiometry of ferrate(VI) and KHP was found to be 1:1. Further, lower pH values and higher KHP concentrations were favoured greatly the degradation of KHP by ferrate(VI). Total organic carbon analysis showed that partial mineralization of KHP was achieved. The presence of several background electrolytes were studied in the degradation of KHP by ferrate(VI).

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.8
• /
• pp.1215-1221
• /
• 1999

Twelve rumen fistulated cross-bred calves were divided into three groups and fed wheat straw and concentrate mixture according to their maintenance requirement. Animals in group II and III were fed 50 and 100mg rumensin per day, in addition to basal feed. Supplementation of rumensin in the diet decreased the dry matter intake significantly (p<0.05) along with a significant decrease in the straw intake. Digestibility coefficients of all the nutrients were not affected significantly except that of CF digestibility which was lower (p<0.05) in groups II and III as compared to group I. Among N-parameters in the rumen fluid, mean $NH_3-N$ was significantly lower in groups II and III (19.13 and 18.63 mg N/100 ml respectively) than in group I (22.68); total-N and TCA-ppt-N did not differ among the three groups. Total VFA concentration did also not differ among the three groups, however, propionate increased from 24.33 molar % to 32.73 while acetate and butyrate decreased respectively from 65.85 to 58.81% and 9.79 to 8.46%. Total VFA, bacteria and protozoa production rates were not affected significantly due to rumensin in diet. Methane production per kg DDM as well as % of methane in total gas were reduced at both the levels of rumensin on different concentrate ratios with wheat straw as roughage. Similar trend was also observed with rice straw and concentrate mixture as substrate with rumensin addition.

• Imaging Science in Dentistry
• /
• v.30 no.4
• /
• pp.259-263
• /
• 2000

Purpose: Upper cervical vertebrae are commonly imaged together with the jaw bones in panoramic radiography. There have been many studies investigating the possible role of mandible as an indicator of osteoporosis. But the result doesn't show unanimity. This study measured bone densities of mandible and second and third cervical vertebrae to find out any relationship between these two areas. These results may contribute in panorama being used as a screening method in detecting possible osteoporotic patient. Materials and Methods: Randomly selected 226 digitized panoramic images with cervical vertebrae shadows from 156 dental patients between 5 to 80 years of age were used. And the bone densities of second and third cervical vertebrae, apical areas of first and second mandibular molars and interdental areas were measured. The bone density measurements were restricted to the cancellous bone and the average and standard deviations and paired t-tests were done to each measurements. Results: All the measurements were statistically significantly related. The best relationship was found between the third cervical vertebrae and first and second mandibular apical areas. The average and standard deviations of the measured bone density ratios of these areas were 1.20±0.45 and 1.34±0.48 each. Conclusion: Patients whose panoramic bone density of the third cervical vertebrae are much below those of mandibular first or second molar apical areas may have osteoporosis.