• 터널과지하공간
• /
• 제15권3호
• /
• pp.223-227
• /
• 2005

국내의 일부 지역에서만 발견되는 유리질화산암중 삼호지역에 분포하고 있는 암석을 대상으로 암석의 물리적$cdot$역학적 특성에 대하여 살펴보았다. 본 연구를 수행하기 위하여 암석의 기본 물리적 성질 시험인 비중, 함수비, 흡수율, 공극률, 초음파 속도, 그리고 역학적 성질 시험인 일축 및 삼축 압축, 압열인장 강도, 점하중 강도 등 실내 시험 방법을 이용하였다. 유리질화산암에서 나타나는 비중의 크기는 2.28이였으며, 함수비와 흡수율은 $1.67\%$와 $1.72\%$로써 비슷한 값을 보였다 공극률은 3.87\%$로 낮게 나타난 반면, 초음파 속도는 P파가 5330m/s, S파가 2980 m/s로써 비교적 높은 값을 보였다. 유리질화산암의 압열인장 강도는 7.2MPa 점하중 강도는 2.6MPa로 나타났다. 점하중 강도로부터 추정한 일축압축 강도는 62.4MPa로 실제 일축압축 시험으로부터 구한 66.0MPa과 매우 잘 일치하였다. 일축압축 시험에서 구한 탄성계수 영률은 E=43.2 GPa이였으며, 포아송비는 v=0.28로 나타났다. 또한, Mohr-Coulomb 파괴포락선으로부터 구한 유리질화산암의 점착력은 c=20.1MPa 내부 마찰각은 $\Phi=28.6^{\circ}$로 나타났다.

• 터널과지하공간
• /
• 제16권3호
• /
• pp.259-276
• /
• 2006

큰 초기응력을 받는 암반에서의 파괴 과정은 굴착경계에 평행하게 발생하는 응력 유도 균열에 의해 지배된다. 특히 지압의 절대크기가 암반 강도의 일정 비율 이상이 되면 응력 집중에 의한 암반의 취성 파괴를 유발하고, 이러한 현상은 터널 굴착 시 발생하는 파괴음과, 굴착면에 평행한 형태로 암편이 탈락하는 취성파괴 현상을 동반한다. Mohr-Coulomb과 같은 기존의 구성 모델은 일반적으로 마찰각과 점착력을 일정한 값으로 가정하므로, 점진적인 암반의 취성파괴 현상을 모사하기 어렵다. 본 논문에서는 일반적인 수치해석 코드에서 취성파괴를 잘 모의할 수 있는 것으로 알려진 CW-FS 모델을 사용하여 유류 저장공동 주변 암반에 대한 수치해석을 실시하고, 그 결과를 선형 Mohr-Coulomb 모델의 결과와 비교하였다. 또한 마찰각과 점착력 성분의 전단 소성변형률 한계를 변화시키면서 해석을 실시하여, 유류 저장공동에서 관찰된 취성파괴와 비슷한 양상을 보이는 해석 결과를 찾아보았다. 결과적으로 CW-FS 모델은 견고한 암반에서의 취성파괴를 모의하는데 있어 적절한 해석방법이라는 것을 알 수 있었다.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2011년도 추계 총회 및 창립 30주년 기념 심포지엄
• /
• pp.197-201
• /
• 2011

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.77-77
• /
• 2005

• 대한토목학회논문집
• /
• 제31권4D호
• /
• pp.571-576
• /
• 2011

일반적으로 도로구조물들은 포화상태라는 가정 하에 설계되고 있으나 실제 도로구조물의 재료인 입상지반재료는 대부분 불포화 상태에 존재하고 있다. 이러한 부분을 반영하기 위하여 본 논문에서는 다져진 입상지반재료를 대상으로 삼축압축시험과 함수특성곡선 시험 결과를 활용하여 다양한 조건에서의 불포화 전단강도를 추정하였다. 이를 바탕으로 비선형 모형을 활용한 2차원 유한요소해석을 실시하고 Mohr-Coulomb항복조건을 통하여 항복하중을 규명하였다. 또한, 입상재료의 항복하중에 대한 도로구조물 표층두께의 변화에 따른 영향을 확인하였다. 해석 결과 입상지반재료의 불포화토 이론을 고려하여 포장 혹은 비포장 도로의 지지력을 예측할 수 있음을 보여주고 있다.

• Geomechanics and Engineering
• /
• 제14권5호
• /
• pp.479-489
• /
• 2018

In this paper, a comparative study of the effects of soil modelling on the interaction between tunnelling in soft soil and adjacent piled structure is presented. Several three-dimensional finite element analyses are performed to study the deformation of pile caps and piles as well as tunnel internal forces during the construction of an underground tunnel. The soil is modelled by two material models: the simple, yet approximate Mohr Coulomb (MC) yield criterion; and the complex, but reasonable hardening soil (HS) model with hyperbolic relation between stress and strain. For the former model, two different values of the soil stiffness modulus ($E_{50}$ or $E_{ur}$) as well as two profiles of stiffness variation with depth (constant and linearly increasing) were used in attempts to improve its prediction. As these four attempts did not succeed, a hybrid representation in which the hardening soil is used for soil located at the highly-strained zones while the Mohr Coulomb model is utilized elsewhere was investigated. This hybrid representation, which is a compromise between rigorous and simple solutions yielded results that compare well with those of the hardening soil model. The compared results include pile cap movements, pile deformation, and tunnel internal forces. Problem symmetry is utilized and, therefore, one symmetric half of the soil medium, the tunnel boring machine, the face pressure, the final tunnel lining, the pile caps, and the piles are modelled in several construction phases.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.821-832
• /
• 2008

The hazard warning levels are necessary for the rational design and safety construction of underground space, as mountain and urban tunnel. Sakurai provided the hazard warning levels for assessing the stability of tunnels using the critical strain of rock mass, which is defined as a ratio between uni-axial compressive strength and the Young's modulus. The concept of critical strain guidelines is introduced in this study for the assessment of tunnel safety during excavation. Moreover, in this paper, the critical strain properties of sedimentary rock in Korea has investigated and analysed in detail by Lab. test, as the uniaxial and triaxial compression tests. Finally, critical strain properties of sedimentary rock on uniaxial and triaxial stress condition is discussed the relationship of failure strain values, uniaxial and triaxial compression strengths, confining pressure and Young's modulus.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.394-401
• /
• 2006

This study developed two dimensional finite element program(FE-SCP) for the analysis of a composite ground reinforced by sand compaction piles with a low area replacement ratio based on the Mohr-Coulomb elastic perfectly plastic constitutive model. Program FE-SCP give some conveniences to users such as automatic mesh generation according to the replacement ratio and the effective sand pile diameter in the post processor. Also, it contains optimum processor in calculation of In-situ stress equilibrium considering different coefficient of earth pressure between sand pile and surrounding clay. Estimated stress-strain behavior using FE-SCP and the measured one from a centrifuge test showed good agreement comparing to the result from a general finite element program.

• Earthquakes and Structures
• /
• 제7권4호
• /
• pp.527-552
• /
• 2014

The development of modern concrete technology makes it much easier to produce high-strength concrete (HSC) or ultra-high-strength concrete (UHSC) with high workability. However, the application of this concrete is limited in practical construction of traditional reinforced concrete (RC) structures due to low-ductility performance. To further push up the limit of the design concrete strength, concrete-filled-steel-tube (CFST) columns have been recommended considering its superior strength and ductility performance. However, the beneficial composite action cannot be fully developed at early elastic stage as steel dilates more than concrete and thereby reducing the elastic strength and stiffness of the CFST columns. To resolve this problem, external confinement in the form of steel rings is proposed in this study to restrict the lateral dilation of concrete and steel. In this paper, a total of 29 high-strength CFST (HSCFST) columns of various dimensions cast with concrete strength of 75 to 120 MPa concrete and installed with external steel rings were tested under uni-axial compression. From the results, it can be concluded that the proposed ring installation can further improve both strength and ductility of HSCFST columns by restricting the column dilation. Lastly, an analytical model calculating the uni-axial strength of ring-confined HSCFST columns is proposed and verified based on the Von-Mises and Mohr-Coulomb failure criteria for steel tube and in-filled concrete, respectively.

• Geomechanics and Engineering
• /
• 제6권4호
• /
• pp.391-401
• /
• 2014

In an attempt to make a numerical modeling of the nailed walls with a view to assess the stability has been used. A convenient modeling which can provide answers to nearly situ conditions is of particular significance and can significantly reduce operating costs and avoid the risks arising from inefficient design. In the present study, a nailing system with a excavation depth of 8 meters has been modeled and observed by using the three constitutive behavioral methods; Mohr Coulomb (MC), hardening soil (HS) and hardening soil model with Small-Strain stiffness ensued from small strains (HSS). There is a little difference between factor of safety and the forces predicted by the three models. As extremely small lateral deformations exert effect on stability and the overall deformation of a system, the application of advanced soil model is essential. Likewise, behavioral models such as HS and HSS realize lower amounts of the heave of excavation bed and lateral deformation than MC model.