• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.93-99
• /
• 2011

To guarantee more exact maximum power of solar cell module, it is absolutely required to have performance characteristics of various solar cells. Today, there are many types of solar simulator for large area measurement. But it is very opaque how to select the best one for various solar cell module like crystalline silicon solar cell, high efficiency solar cell, amorphous silicon thin film solar cell, CdTe and CIGS solar cell module. So, in this paper 4 types of photovoltaic module were selected to compare the electrical characteristics by changing light pulse duration time and voltage scan direction. Light pulse duration time was varied from 10msec to 800msec. And two types of voltage scan directions, Voc->Isc and Isc->Voc were selected. From this results, optimum measuring condition was suggested and electrical variation was analysed for each types of solar cell module. The detail description is specified as the following paper.

• 대한건축학회논문집:구조계
• /
• 제35권8호
• /
• pp.177-184
• /
• 2019

Recently, electric power usages and peak loads from buildings are increasing due to higher outdoor air temperatures and/or abnormal climate during the summer period. As one of the eco-friendly measures, a renewable energy system has been received much attention. Particularly, interest on a photovoltaic (PV) system using solar energy has been rapidly increasing in a building sector due to its broad applicability. In using the PV system, one of important factors is the PV efficiency. The normal PV efficiency is determined based on the STC(Standard Test Condition) and the NOCT(Nominal Operating Cell Temperature) performance test. However, the actual PV efficiency is affected by the temperature change at the module surface. Especially, higher module temperatures generally reduce the PV efficiency, and it leads to less power generation from the PV system. Therefore, the analysis of the relation between the module temperature and PV efficiency is required to evaluate the PV performance during the summer period. This study investigates existing algorithms for calculating module surface temperatures and analyzes resultant errors with the algorithms by comparing the measured module temperatures.

• 신재생에너지
• /
• 제4권4호
• /
• pp.17-22
• /
• 2008

A low concentrating (< 5X) photovoltaic module with aluminum reflectors is fabricated and evaluated which is designed to reduce the affection of the high temperature to the solar cell modules preventing the efficiency lowering. As results, the output power is increased of 1.97X from the concentrating photovoltaic module which is designed with the concentrating ratio of 2.25X and to control the module temperature cooling the module by air circulation. Also, the effect of the concentrating module with aluminum reflectors on the conventional PV module is investigated at the field. The result shows the increase of the output power more than about 20% and the improvement of the module efficiency of 1.4X in spite of the increase of average module temperature.

• 조명전기설비학회논문지
• /
• 제23권9호
• /
• pp.124-129
• /
• 2009

최근 자동차 및 자동화 등 많은 첨단 산업분야에서 산업용 모터 정밀 제어를 위한 인버터의 요구가 증가하고 있다. 본 논문에서는 FPGA를 이용하여 단일 제어 유닛으로 여러 개의 모터를 제어할 수 있는 SVPWM 모듈을 설계 제작하여 모터 정밀제어에 응용하고자 한다. 개발된 WVPWM 모듈에는 PWM 발생기뿐만 아니라 위치 및 전류센서 처리 부분과 데프타임 보상기 알고리즘도 함께 구현되었다. 개발 툴은 ALTERA Quartus 8.0을 사용하였으며 시뮬레이션에 의해 동작 특성을 검증하였고 실험을 통해 성능을 검증하였다.

• Perspectives in Nursing Science
• /
• 제9권2호
• /
• pp.136-145
• /
• 2012

Purpose: The purpose of this study was to verify the educational effectiveness of the Objective structured clinical examination (OSCE) module development activities on nursing students in the areas of performance skill, knowledge, self-directed learning readiness, and problem solving ability for medication skill. Methods: This study was a nonequivalent control group non-synchronized post-test design. The subjects (N=47), who agreed to participate in this study, were assigned to either the experimental (n=24) or control group (n=23). The experimental group was trained with OSCE module development activities for four days. The control group was trained with a traditional demonstration and practice class for the same amount of time as the experimental group. Medication performance skill and knowledge tests and surveys were done to measure self-directed learning readiness, and learning satisfaction after the experimental treatments. Results: The experimental group which participated in the OSCE module development activities showed significantly higher performance skill, self-directed learning readiness, and problem solving ability for skin test and insulin medication than that of the control group of traditional education. Conclusion: It is recommended to use the OSCE module development activities for nursing students in nursing education-learning in order to improve nursing skills.

• 한국재료학회지
• /
• 제31권2호
• /
• pp.84-91
• /
• 2021

To cope with automobile exhaust gas regulations, ISG and charging control systems are applied to HEV vehicles for the purpose of improving fuel economy. These systems require quick charge-discharge performance of high current. Therefore, a Module of the AGM battery with high energy density and EDLC(Electric Double Layer Capacitor) with high power density are constructed to study the charging and discharging behavior. In CCA, which evaluates the starting performance at -18 ℃ & 30 ℃ with high current, EDLC contributed for about 8 sec at the beginning. At 0 ℃ CA (Charge Acceptance), the initial Charging current of the AGM/EDLC Module, is twice that of the AGM lead acid battery. To play the role of EDLC during high-current rapid charging and discharging, the condition of the AGM lead-acid battery is optimally maintained. As a result of a Standard of Battery Association of Japan (SBA) S0101 test, the service life of the Module of the AGM Lead Acid Battery/EDLC is found to improve by 2 times compared to that of the AGM Lead Acid Battery.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.313-315
• /
• 2011

Smart phone에 실장되는 카메라 모듈은 Focus 동작에 따라 2가지 타입이 있다. AF(Auto focus) camera module과 FF(Fixed focus) camera module 2가지 타입이다. AF Camera module은 Lens의 위치를 이동하여 자동으로 초점을 맞추는 방식이며, FF camera module은 Lens의 위치가 고정된 상태로 초점을 맞추는 방식이다. EDOF camera module은 Lens의 위치가 고정된 상태에서 AF 모듈처럼 EDOF 알고리즘을 사용하여 초점을 맞추는 기술을 적용한 모듈이다. 본 논문에서는 이러한 EDOF camera module의 해상도 최적화를 구현한다.

• 품질경영학회지
• /
• 제30권2호
• /
• pp.1-10
• /
• 2002

A performance evaluation model of an R&D module in the quality management system for M Company Is constructed using QFD. The company produces telecommunication devices and employs the performance evaluation model based on ISO 9000 family. However, the model has some problems, one of them is that all check items are regarded as equally important Customer requirements are gathered from internal customers and QFD is utilized to obtain weights for each check item.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.300-302
• /
• 2006

Middleware offers function that user application program can transmit data independently of network device. Connection management about network connection of module is important for normal service of module base personal robot. Unpredictable network disconnection is influenced to whole robot performance in module base personal robot. For this, Middleware must be offer two important function. The first is function of error detection and reporting about abnormal network disconnection. Therefore, middleware need method for network error detection and module management to consider special quality that each network device has. The second is the function recovering that makes the regular service possible. When the module closed from connection reconnects, as this service reports connection state of the corresponding module, the personal robot resumes the existing service. In this paper proposed method of network connection management for to support fault tolerant about network error of network module based personal robot.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.37-38
• /
• 2006

In this paper, power distribution module for car relay control with Control area network is developed. This module is called Intelligent power distribution module because it has microprossor which can communicate with other electric module such as ECU and Body control module and also has self-diagonasis function. The developed IPDM module is tested on vehicle and the good performance has been achieved.