• 제목/요약/키워드: modulation transfer function(MTF)

검색결과 204건 처리시간 0.028초

원적외선용 반사식 전방위 비전 시스템의 광학 설계 (Optical Design of a Reflecting Omnidirectional Vision System for Long-wavelength Infrared Light)

  • 주윤재;조재흥;유재명
    • 한국광학회지
    • /
    • 제30권2호
    • /
    • pp.37-47
    • /
    • 2019
  • 야간 감시를 위해 원적외선에서 사용하는 4개의 구면 및 비구면 거울을 갖는 반사식 전방위 비전 시스템 광학계를 제안한다. 이 반사식 전방위 비전 시스템은 유사 카세그레인식 수광부 반사경 시스템과 역 유사 카세그레인식 결상부 반사경 시스템으로 설계되었으며, 그에 따른 설계 과정과 성능 분석을 상세히 제시한다. 이 비전 시스템의 반화각과 F-수는 각각 $40{\sim}110^{\circ}$와 1.56으로 설정하였다. 그리고 원적외선 파장 영역에서 비전 시스템을 사용하기 위해서 상의 크기가 원적외선용 마이크로 볼로미터의 크기와 가능한 같아야 하므로 상의 크기를 $5.9mm{\times}5.9mm$에 맞추어 설계를 진행하였다. 최적화 설계 후 $40{\sim}110^{\circ}$의 반화각 범위에서의 상 크기의 비율은 48.86%이며, 나이퀴스트 주파수인 20 lp/mm의 공간주파수에서 원적외선의 변조전달함수 값이 0.381에 도달하였다. 또한 20 lp/mm의 공간주파수에서 원적외선 영역에 대한 공차의 누적 확률은 99.75%였다. 또한 역 유사 카세그레인식 구조의 결상부 부경을 온도 변화에 따른 변조전달함수 값을 개선시키는 보상자로 선택하여 반사식 전방위 비전 시스템의 운용 온도 범위인 $-32^{\circ}C$에서 $+55^{\circ}C$의 온도 범위에서 비열화 해석 및 보상화 과정을 진행하였다.

Hybrid Filter Based on Neural Networks for Removing Quantum Noise in Low-Dose Medical X-ray CT Images

  • Park, Keunho;Lee, Hee-Shin;Lee, Joonwhoan
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제15권2호
    • /
    • pp.102-110
    • /
    • 2015
  • The main source of noise in computed tomography (CT) images is a quantum noise, which results from statistical fluctuations of X-ray quanta reaching the detector. This paper proposes a neural network (NN) based hybrid filter for removing quantum noise. The proposed filter consists of bilateral filters (BFs), a single or multiple neural edge enhancer(s) (NEE), and a neural filter (NF) to combine them. The BFs take into account the difference in value from the neighbors, to preserve edges while smoothing. The NEE is used to clearly enhance the desired edges from noisy images. The NF acts like a fusion operator, and attempts to construct an enhanced output image. Several measurements are used to evaluate the image quality, like the root mean square error (RMSE), the improvement in signal to noise ratio (ISNR), the standard deviation ratio (MSR), and the contrast to noise ratio (CNR). Also, the modulation transfer function (MTF) is used as a means of determining how well the edge structure is preserved. In terms of all those measurements and means, the proposed filter shows better performance than the guided filter, and the nonlocal means (NLM) filter. In addition, there is no severe restriction to select the number of inputs for the fusion operator differently from the neuro-fuzzy system. Therefore, without concerning too much about the filter selection for fusion, one could apply the proposed hybrid filter to various images with different modalities, once the corresponding noise characteristics are explored.

비파괴검사를 위한 검출기 이동 방법과 논블라인드 디컨볼루션 순차 적용에 따른 이미지 해상도 증가 연구 (A Study on Image Resolution Increase According to Sequential Apply Detector Motion Method and Non-Blind Deconvolution for Nondestructive Inspection)

  • 소경재;김병수;엄원영;이대희
    • 한국군사과학기술학회지
    • /
    • 제23권6호
    • /
    • pp.609-617
    • /
    • 2020
  • Non-destructive inspection using X-rays is used as a method to check the inside of products. In order to accurately inspect, a X-ray image requires a higher spatial resolution. However, the reduction in pixel size of the X-ray detector, which determines the spatial resolution, is time-consuming and expensive. In this regard, a DMM has been proposed to obtain an improved spatial resolution using the same X-ray detector. However, this has a limitation that the motion blur phenomenon, which is a decrease in spatial resolution. In this paper, motion blur was removed by applying Non-Blind Deconvolution to the DMM image, and the increase in spatial resolution was confirmed. DMM and Non-Blind Deconvolution were sequentially applied to X-ray images, confirming 62 % MTF value by an additional 29 % over 33 % of DMM only. In addition, SSIM and PSNR were compared to confirm the similarity to the 1/2 pixel detector image through 0.68 and 33.21 dB, respectively.

치료방사선량평가를 위한 CCD 기반 광학컴퓨터단층촬영 스캐너의 특성 (Characteristics of CCD Based Optical CT Scanner for Therapeutic Radiation Dosimetry)

  • 이재춘;김애란;지영훈;권수일
    • 한국의학물리학회지:의학물리
    • /
    • 제27권2호
    • /
    • pp.72-78
    • /
    • 2016
  • 중합체 겔 선량계의 치료방사선 선량 평가를 위해 CCD 카메라와 LED 광원을 결합하여 소형 광학컴퓨터단층촬영 스캐너를 제작하였다. LED에서 나온 평행 빔은 아쿠아리움, 겔 팬텀, 텔레센트릭 렌즈를 통과한 후 CCD 카메라로 영상이 수집되었으며, MATLAB을 이용하여 영상을 재구성하였다. 겔 선량계는 구동 모타와 LabVIEW를 이용하여 $0.72^{\circ}$씩 회전시키었으며, 1회전 당 500장의 슬라이스 영상을 얻는데 걸린 시간은 20분 이내였다. 제작한 광학컴퓨터단층촬영 스캐너의 공간주파수 4.5 lp/mm에서 MTF값은 72%이었다. 중합체 겔 선량계의 광학컴퓨터단층촬영 스캐너의 선형상관계수 $r^2$ 값은 0.987이었다.

Infrared Dual-field-of-view Optical System Design with Electro-Optic/Laser Common-aperture Optics

  • Jeong, Dohwan;Lee, Jun Ho;Jeong, Ho;Ok, Chang Min;Park, Hyun-Woo
    • Current Optics and Photonics
    • /
    • 제2권3호
    • /
    • pp.241-249
    • /
    • 2018
  • We report a midinfrared dual-field-of-view (FOV) optical system design for an airborne electro-optical targeting system. To achieve miniaturization and weight reduction of the system, it has a common aperture and fore-optics for three different spectral wavelength bands: an electro-optic (EO) band ($0.6{\sim}0.9{\mu}m$), a midinfrared (IR) band ($3.6{\sim}4.9{\mu}m$), and a designation laser wavelength ($1.064{\mu}m$). It is free to steer the line of sight by rotating the pitch and roll axes. Our design co-aligns the roll axis, and the line of sight therefore has a fixed entrance pupil position for all optical paths, unlike previously reported dual-FOV designs, which dispenses with image coregistration that is otherwise required. The fore-optics is essentially an achromatized, collimated beam reducer for all bands. Following the fore-optics, the bands are split into the dual-FOV IR path and the EO/laser path by a beam splitter. The subsequent dual-FOV IR path design consists of a zoom lens group and a relay lens group. The IR path with the fore-optics provides two stepwise FOVs ($1.50^{\circ}{\times}1.20^{\circ}$ to $5.40^{\circ}{\times}4.32^{\circ}$), due to the insertion of two Si lenses into the zoom lens group. The IR optical system is designed in such a way that the location and f-number (f/5.3) of the cold stop internally provided by the IR detector are maintained when changing the zoom. The design also satisfies several important performance requirements, including an on-axis modulation transfer function (MTF) that exceeds 10% at the Nyquist frequency of the IR detector pitch, with distortion of less than 2%.

유효검출양자효율과 선량을 이용한 소아 흉부 X-선 영상의 기술적인 인자에 관한 조사 (Survey of Technical Parameters for Pediatric Chest X-ray Imaging by Using Effective DQE and Dose)

  • 박혜숙;김예슬;김상태;박옥섭;전창우;김희중
    • 한국의학물리학회지:의학물리
    • /
    • 제22권4호
    • /
    • pp.163-171
    • /
    • 2011
  • 본 연구에서는 피사체에 의한 산란, 초점에 의한 흐림, 기하학적 확대도 그리고 검출기의 특성이 반영된 유효검출양자효율(effective detective quantum efficiency, eDQE)과 유효선량을 평가하여 소아 흉부 X선 촬영 시 선량의 최적화를 위한 조사조건의 영향을 평가하였다. 100, 110, 120, 150, 180 cm의 FDD (focus-to-detector distance)일 때 관전압을 40 kVp에서 90 kVp까지 10 kVp씩 증가시켜가며 동일한 유효선량일 때 eDQE를 평가하였다. 그 결과 eDQE는 다른 관전압과 비교 시60 kVp에서 가장 높은 값을 보였다. 특히, 동일한 유효선량일 때 그리드가 없을 경우 상대적으로 매우 높은 eDQE를 나타냈다. 이는 그리드에 의한 산란선의 감소가 그리드에서 흡수된 유효 광자의 손실을 보상하지 못하기 때문이다. 그리드 가 없을 경우 FDD가 증가할수록 향상된 유효변조전달함수(effective modulation transfer function, eMTF)로 인하여 eDQE는 증가하였다. 국내 대형병원들의 대부분은 15개월 소아의 흉부 X선 촬영 시 그리드와 함께 100 cm의 짧은 FDD를 사용하고 있다. 그 결과 대부분의 경우는 국내 환자선량권고량(diagnostic reference level, DRL) $100{\mu}Gy$을 초과하였다. 이는 5세 소아 흉부 X선 촬영 시 150 cm에서 180 cm 사이의 긴 FDD를 사용하지만, 15개월을 모사하고 있는 표준 소아팬텀의 흉부 X선 촬영의 경우 100 cm의 짧은 FDD를 사용했기 때문이다. 따라서, 나이에 따른 소아의 흉부 X선 촬영을 시행하기 위한 적절한 조사조건이 확립되어야 한다. 본 연구 결과는 나이에 따른 소아 선량의 권고량을 설립하는데 기초자료로 활용될 수 있을 것이다.

우주환경에서 대형 반사경의 습기 방출에 의한 형상 변화 예측방법 (Prediction Method for Moisture-release Surface Deformation of a Large Mirror in the Space Environment)

  • 송인웅;양호순;김학용;김성희;이회윤;김석환
    • 한국광학회지
    • /
    • 제29권4호
    • /
    • pp.166-172
    • /
    • 2018
  • 본 논문에서는 우주의 진공환경에서 반사경 코팅이 흡수한 습기를 방출하면서 나타나는 경면 형상의 변화를 예측하기 위한 새로운 방법론을 제안한다. 직경 50 mm, 두께 1.03 mm의 원형 시편과 간섭계를 통해 진공환경에서 나타나는 시편 형상 변화량을 측정하고 제르니케 프린지 다항식(Zernike fringe polynomial) 곡률항으로 나타내었다. 그 결과 습기 방출에 따른 코팅 스트레스는 152.7 Mpa로 계산되었다. 계산된 스트레스는 1.25 mm 두께 시편의 수치모사 모델에 적용하여 변화된 형상의 곡률항을 측정결과의 표준편차 이내($78.9{\pm}5.9nm$)로 예측할 수 있음을 검증하였다. 이 방법론을 2019년에 발사 예정인 차세대중형위성의 직경 600 mm 쌍곡면경에 적용, 습기 방출에 의한 경면 형상 변화를 계산하여 반사경의 초점거리가 약 $2.005{\mu}m$ 만큼 ?아짐을 예측하였다. 초점거리 변화는 광학 탑재체의 MTF를 한계공간주파수(Nyquist frequency)에서 2.3% 가량 낮추지만, 요구 사양을 만족하여 우주에서도 문제없이 운용 가능함을 확인하였다.

LED 조명계를 결합한 캡슐내시경용 초소형 반사굴절식 전방위 광학계의 설계 (Optical Design of a Subminiature Catadioptric Omnidirectional Optical System with an LED Illumination System for a Capsule Endoscope)

  • 문태성;조재흥
    • 한국광학회지
    • /
    • 제32권2호
    • /
    • pp.68-78
    • /
    • 2021
  • 측면 360° 조명을 위한 6개의 LED (light emitting diode)로 구성된 조명계가 부착된 캡슐내시경용 초소형 반사굴절식 전방위 광학계를 설계하고 성능을 평가하였다. 이 광학계의 총 길이, 전장길이, 반화각(HFOV: half field of view), F-수는 각각 14.3 mm, 8.93 mm, 51°~120°, 3.5로 설계되었다. 이 전방위 광학계는 0.1 megapixels의 CMOS (complementary metal-oxide-semiconductor) 센서를 사용하였으며, LED 조명계는 한 개당 0.25 lm의 LED 6개를 사용하여 광축을 따라 놓여 있는 내장의 내벽을 조명하도록 하였다. 이 결과, 최적화 설계된 광학계의 변조전달함수 0.3에서의 공간주파수, 나이퀴스트 주파수인 44 lp/mm와 0.3의 변조전달함수에서 공차에 따른 누적확률, 초점심도는 각각 130 lp/mm, 95%, -0.097 mm~+0.076 mm이다. 또한 광학계의 시야각 범위 내에서 LED 조명계에 의한 광축으로부터 물체거리가 15 mm인 내장의 내벽에서의 시뮬레이션된 조도는 최소 315 lx~최대 725 lx로 내장의 내벽을 촬영할 수 있는 조도와 가시도임을 알 수 있다.

굴절/회절 하이브리드 렌즈 적용 슬림 모바일 렌즈 설계 (Slim Mobile Lens Design Using a Hybrid Refractive/Diffractive Lens)

  • 박용철;주지용;이준호
    • 한국광학회지
    • /
    • 제31권6호
    • /
    • pp.281-289
    • /
    • 2020
  • 본 논문은 하이브리드 굴절/회절광학소자를 이용한 초슬림 모바일 카메라 렌즈를 보고한다. 먼저 앞서 보고된 23개의 광학 설계 사양 분석을 통해 전장길이(total track length) 최소화를 위하여, 광시야 렌즈 설계에서 일반적으로 적용되는 음(-)의 렌즈를 제1렌즈로 사용하는 리트로포커스(retrofocus) 타입이 아닌, 양(+)의 렌즈가 제일 먼저 선행하는 텔레포토(telephoto) 타입을 선택하였다. 이후 초기 최적 설계 및 제르니케 다항식 기반 수차 분석을 통한 보정 설계를 진행하였으며, 보정 설계 과정에서 잔여 구면색수차(chromatic spherical aberration)의 효과적 제거를 위하여 굴절 및 회절이 결합된 하이브리드 렌즈 1매를 적용하였다. 적용된 최종 설계는 하이브리드 렌즈 1매 포함 총 6매의 렌즈를 이용하여 F/2.0, 화각 90°, 유효초점길이 2.23 mm, 전장길이 3.7 mm를 달성하였고, 결과적으로 1.7의 낮은 전장길이 대 초점길이 비 즉, 텔레포토비(telephoto ratio)를 달성하였다. 동일 전장길이를 갖는 하이브리드 렌즈 미적용 비교 설계 대비, 공간주파수 180 cycles/mm에서 MTF 값이 중심 시야에서는 63%에서 71~73%로 약 8~10% 개선되었고, 0.5, 0.7, 0.9 시야에서도 2~3% 개선되었다. 또한, 가공성 및 회절 패턴에 의한 산란 등을 고려하였을 때 조리개에 위치한 렌즈가 하이브리드 렌즈로 적절함을 알 수 있었고, 이 경우 2개의 회절존으로도 성능 개선이 확인되었다.

RGB/NIR CMOS 센서에서 정면 영상과 측면 영상을 동시에 결상하는 캡슐 내시경용 개선된 반사굴절식 전방위 광학계의 광학 설계 (Optical Design of a Modified Catadioptric Omnidirectional Optical System for a Capsule Endoscope to Image Simultaneously Front and Side Views on a RGB/NIR CMOS Sensor)

  • 홍영기;조재흥
    • 한국광학회지
    • /
    • 제32권6호
    • /
    • pp.286-295
    • /
    • 2021
  • RGB/NIR CMOS 센서를 사용하여 가시광에서의 정면 시야각과 가시광(RGB) 및 근적외선(near-infrared, NIR)에서의 측면 시야각을 갖는 캡슐 내시경용 개선된 반사굴절식 전방위 광학계(modified catadioptric omnidirectional optical system, MCOOS)를 설계한다. 전방 시야각 내의 영상은 반사굴절식 전방위 광학계(catadioptric omnidirectional optical system, COOS)의 부경 뒤에 배치된 3개의 추가된 렌즈와 COOS의 결상 렌즈계로 구성된 MCOOS의 전방 결상 렌즈계로 결상한다. 측면 영상은 COOS로부터 얻어진다. 이 센서에 대한 가시광과 근적외선에서의 나이퀴스트 주파수는 각각 90 lp/mm와 180 lp/mm이다. 설계 사양에서 전장길이, F-수, 전방과 측면 반화각은 각각 12 mm, 3.5, 70°, 50°-120°로 결정하였다. MCOOS의 COOS에 대한 변조전달함수 0.3에서의 공간주파수, 초점심도, 가시광과 근적외선 영역에서의 공차에 따른 누적 확률은 각각 154 lp/mm, -0.051-+0.052 mm, 99%이다. MCOOS의 정면 결상광학계의 변조전달함수 0.3에서의 공간주파수, 초점 심도, 가시광 영역에서 공차에 따른 누적 확률은 각각 170 lp/mm, -0.035-0.051 mm, 99.9%이다.