• 한국정보과학회논문지:시스템및이론
• /
• 제26권9호
• /
• pp.1055-1063
• /
• 1999

공개키 암호화 시스템에서 주된 연산은 512비트 이상의 큰 수에 의한 모듈러 지수 연산으로 표현되며, 이 연산은 내부적으로 모듈러 곱셈을 반복적으로 수행함으로써 계산된다. 본 논문에서는 Montgomery 알고리즘을 분석하여 right-to-left 방식의 모듈러 지수 연산에서 공통으로 계산 가능한 부분을 이용하여 모듈러 제곱과 모듈러 곱셈을 동시에 수행하는 선형 시스톨릭 어레이를 설계한다. 설계된 시스톨릭 어레이는 VLSI 칩과 같은 하드웨어로 구현함으로써 IC 카드나 smart 카드에 이용될 수 있다.Abstract The main operation of the public-key cryptographic system is represented the modular exponentiation containing 512 or more bits and computed by performing the repetitive modular multiplications. In this paper, we analyze Montgomery algorithm and design the linear systolic array for performing modular multiplication and modular squaring simultaneously using the computable part in common in right-to-left modular exponentiation. The systolic array presented in this paper could be designed on VLSI hardware and used in IC and smart card.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.223-225
• /
• 2021

모듈러 곱셈은 ECC의 점 스칼라 곱셈을 위한 핵심 연산이며, ECC 프로세서의 성능에 영향을 미치는 가장 중요한 요소이다. 본 논문에서는 3-way Toom-Cook 곱셈 알고리듬과 수정된 고속 축약 알고리듬을 적용한 256-비트 모듈러 곱셈기 설계에 대해 기술한다. 90-비트 곱셈기 1개와 264-비트 가산기 3개가 사용되었으며, 하드웨어 크기와 소요 클록 사이클 수 사이의 최적화를 이루었다. Zynq UltraScale+ MPSoC 디바이스에 구현하여 모듈러 곱셈기를 검증하였으며, 모듈러 곱셈 연산에 15 클록 사이클이 소요된다.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.861-871
• /
• 2016

With high penetration of renewable energies, power electronic transformers (PETs) will be one of the most important infrastructures in the future power delivery and management system. In this study, an isolated bidirectional modular multilevel DC/DC converter is proposed for PET applications. A modular multilevel structure is adopted as switching valves to sustain medium voltages to achieve modular design and high reliability. Only one high-frequency transformer is used in the proposed converter, which significantly simplifies the circuit and galvanic insulation design. A dual-phase-shift modulation strategy is proposed to regulate the output power and achieve a simple voltage balancing control. A down-scaled (2 kW/20 kHz) prototype is constructed to demonstrate the proposed converter and verify the control strategy. The experimental results comply with the theoretical analysis well, with the highest power efficiency reaching 97.6%.

• 전력전자학회논문지
• /
• 제21권1호
• /
• pp.49-57
• /
• 2016

A modular multilevel converter is widely adapted for a high-voltage direct current power transmission system. This study proposes a design methodology for a novel digital control that mitigates the negative effects caused by time delay, including communication transport delay for a modular multilevel converter. The modeling and negative effect of time delay are analyzed theoretically in a frequency domain, and its compensation methodology based on an inverse model is described fully with practical considerations. The proposed methodology is verified through several simulation results using a modular 21-level converter system.

• 대한건축학회논문집:구조계
• /
• 제34권3호
• /
• pp.19-28
• /
• 2018

Key factors that ensure competitiveness of modular unit include consistent high quality and connection condition that ensures high structural performance while minimizing the overall scale of the on-site process. However, it is difficult to evaluate the structural performance of the connection of modular unit, and its structural analysis and design method can be different depending on the connection to its development, which affects the seismic performance of its final design. In particular, securing the seismic performance is the key to designing modular systems of mid-to-high-rise structure. In this paper, therefore, the seismic performance of the modular system with bracket-typed fully restrained moment connections according to stiffness and the shapes of various connection members was evaluated through experimental and analytical methods. To verify the seismic performance, a cyclic loading test of the connection joint of the proposed modular system was conducted. As a result of this study, theoretical values and experimental results were compared with the initial stiffness, hysteresis behavior and maximum bending moment of the modular system. Also, the connection joint was modeled, using the commercial program ANSYS, which was then followed by finite element analysis of the system. According to the results of the experiment, the maximum resisting force of the proposed connection exceeded the theoretical parameters, which indicated that a rigid joint structural performance could be secured. These results almost satisfied the criteria for connection bending strength of special moment frame listed on KBC2016.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.263-272
• /
• 2016

모듈러 제품 설계는 유연한 제품 수정, 제품 개발 및 생산 리드타임 감소, 제품의 다양성 증대와 같은 많은 장점들이 있다. 모듈러 제품 설계의 목적은 여러 개의 모듈들로 구성된 제품의 아키텍쳐를 효율적으로 개발하는 것인데, 이들 모듈들은 컴포넌트들 간 물리적, 기능적 상호관계 분석을 토대로 컴포넌트들 간의 유사성을 최대화함으로써 만들어 질 수 있다. 본 연구에서는 모듈러 제품 설계의 핵심 작업인 모듈화를 위하여 3개 단계로 이뤄진 체계적인 절차를 제시하고자 한다. 첫 번째 단계는 컴포넌트들 간 물리적, 기능적 상호관계 분석을 통한 컴포넌트들 간 상관 관계 매트릭스를 구성하는 것이고, 두 번째 단계는 컴포넌트들 간 상관 관계를 최대화하는 컴포넌트들의 군집들을 찾아내기 위하여 네트워크 흐름으로 모델링하는 것이다. 마지막으로 세 번째 단계에서는 선형 계획 모형인 네트워크 흐름 모델을 풀어서 컴포넌트들의 군집들을 찾아내고 이들을 모듈화 하는 것이다. 본 연구에서 제시한 절차의 이해와 실제 적용을 위하여 진공 청소기 모듈화 사례에 적용해 보고 절차의 타당성을 보여준다.

• 복식문화연구
• /
• 제20권2호
• /
• pp.222-237
• /
• 2012

Air-containing fashion, which can offer diverse functions through the inflow and outflow of air, is highly relevant in today's mobile society, where people are experiencing a wider range of environments. This study attempts to suggest the possibility of air-containing multi-functional fashion that could continuously be utilized by developing a design for an air-containing jacket using modular systems. In this research, the modular systems in architecture and furniture design were referenced through a review of the literature for the purpose of establishing modular systems in fashion. Functions relevant to the mobility of today's society are derived from the results of advanced research and applied to the design of modules of the jacket. The modules are integrated through the modular systems. The folding and unfolding structure in architecture and furniture is applied as a folding system in fashion, the vertical accumulation structure as a layering system, and the horizontal integration structure as a combining system, and in addition, the containing system has emerged in fashion. Each module is designed to fulfill certain functions, such as cushioning, heat insulation, and portability. The folding system is utilized in designing the cushion module to support the neck and back of a wearer by making its hood and hem fold in the back. The application of a layering system was suggested by making the vest, combined with the neck cushion and back cushion via the combining system, layered with its insulation module. By applying the combining system, the hood that includes the neck cushion, the skirt that includes the back cushion, the body that includes the insulation module, and the sleeves can be connected and separated by a zipper. The applicability of this concept was proven by applying a developed design to an actual item.

• ETRI Journal
• /
• 제33권1호
• /
• pp.136-139
• /
• 2011

A modular upgrade design for packet transport switch nodes is presented where packet loss is dramatically reduced by intra-module and inter-module buffer sharing. This modular design offers significant cost and power reduction in a high-data-rate system where buffers are highly costly and power-greedy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.444-447
• /
• 2005

Increasing competition is due to internationalization in market. This result requires various products in a rapid development of product. Die design is one of bottleneck areas in product development. It takes 40% of total time for whole car development. Therefore a new method should be developed as a fundament on which the design process of die can be carried out effectively. This can be realized by using modular design based on standard template. In this paper a modular design concept will be discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1177-1181
• /
• 1995

Fixtures are devided into special purpose fixtures, modular fixtures and general purpose fixtures. In this paper, the database of modual fixtures for flexible manufacturing systems is estabilished. Modular fixtures are classified into base plates, supporting elements, locating elements, clamping elements and accessories. Also the concept for the modular fixture design expert system is proposed.