• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.272-279
• /
• 2002

During field survey of ground penetrating radar or borehole radar, we often encounter some problems which could be solved easily by modifying structure of the system such as antenna length, shape or array. In addition, it is necessary that the user could easily modify configuration of the radar system na test various array of antennas in order to verify and confirm numerical modeling results concerning radar antennas. We have developed network-analyzer-based, stepped-frequency georadar system. This system had been comprised with coaxial cable to confirm possibility of the system, then we have upgraded the system to use optical cable that is composed of optical/electric transducers, electric/optical transducers, amp, pre-amp and antennas. The software for the aquisition of data has been developed to control the system automatically using PC with GPIB communication and to display the obtained data graphically. We have tested the system in field survey na the results have been compared with those of RAMAC/GPR system.

• Journal of Preventive Medicine and Public Health
• /
• v.45 no.6
• /
• pp.394-401
• /
• 2012

Objectives: Diabetes and obesity each increases mortality, but recent papers have shown that lean Asian persons were at greater risk for mortality than were obese persons. The objective of this study is to determine whether an interaction exists between body mass index (BMI) and diabetes, which can modify the risk of death by cardiovascular disease (CVD). Methods: Subjects who were over 20 years of age, and who had information regarding BMI, past history of diabetes, and fasting blood glucose levels (n=16 048), were selected from the Korea Multi-center Cancer Cohort study participants. By 2008, a total of 1290 participants had died; 251 and 155 had died of CVD and stroke, respectively. The hazard for deaths was calculated with hazard ratio (HR) and 95% confidence interval (95% CI) by Cox proportional hazard model. Results: Compared with the normal population, patients with diabetes were at higher risk for CVD and stroke deaths (HR, 1.84; 95% CI, 1.33 to 2.56; HR, 1.82; 95% CI, 1.20 to 2.76; respectively). Relative to subjects with no diabetes and normal BMI (21 to 22.9 $kg/m^2$), lean subjects with diabetes (BMI <21 $kg/m^2$) had a greater risk for CVD and stroke deaths (HR, 2.83; 95% CI, 1.57 to 5.09; HR, 3.27; 95% CI, 1.58 to 6.76; respectively), while obese subjects with diabetes (BMI ${\geq}25kg/m^2$) had no increased death risk (p-interaction <0.05). This pattern was consistent in sub-populations with no incidence of hypertension. Conclusions: This study suggests that diabetes in lean people is more critical to CVD deaths than it is in obese people.

• Journal of the HCI Society of Korea
• /
• v.6 no.2
• /
• pp.1-9
• /
• 2011

Increasing communication through social media forming impression becomes more important. In this research, how three stimulus can build the impression of Twitter Account Owner(TAO) such as the types of the profile pictures, the types of timeline messages and the number of followers. We analysed the feelings of respondents when they face TAO's formal picture and informal picture, informative message and normal message, the number of followers. We, in addition, measured the willingness of respondents whether they want to develop their relationship online and offline as well. As a result, informative message draws positive reliability and makes respondent want to build deeper relationship with TAO at online. Respondent answered TAO's informal picture was more likable than formal picture and more reliable when informative message and formal picture were provided together. Our study shows that there are actual differences at attitudes of respondents by the types of the profile pictures and the types of timeline messages. Thus, we can conclude that TAOs can modify their impressions at online as they hope to.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.14 no.1
• /
• pp.199-218
• /
• 2003

The discriminating power of journal evaluation criteria of Korean medical journals were measured. The study used the data of 76 medical journals, collected in the "Korean Medical Journal Evaluation" process conducted by the Korean Association of Medical Journal Editors (KAMJE) between 1997 and 1999. For each evaluation criterion, the distribution of the individual score vs the total score of a journal received was plotted and their correlations were analyzed. It is found that the evaluation criteria with a high discriminating power are the ones associated with the peer review system and the journal editing. The evaluation criteria with a low discriminating power are the journal frequency and how often a chief editor is changed. Some evaluation criteria such as "Journal holding rates of medical libraries" and "year-end index" need modifications in the evaluation methods. Other evaluation criteria such as "Journal self-citation rate","SCI citation rate" and "SCI impact factor" need to modify the score ranges. It is recommended that the new evaluation criteria such as "citation rate by Korean medical journals" and "Access availability of the journal information through major Korean medical abstract databases" should be added.formation through major Korean medical abstract databases" should be added.dded.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.551-558
• /
• 2005

The setting and hardening of concrete is accompanied with nonlinear temperature distribution caused by development of hydration heat of cement. Especially at early ages, this nonlinear distribution has a large influence on the crack evolution. As a result, in order to predict the exact temperature history in concrete structures it is required to examine thermal properties of concrete. In this study, the convection heat transfer coefficient which presents thermal transfer between surface of concrete and air, was experimentally investigated with variables such as velocity of wind, curing condition and ambient temperature. At initial stage, the convection heat transfer coefficient is overestimated by the evaporation quantity. So it is essential to modify the thermal equilibrium considered with the boiling effect. From experimental results, the convection heat transfer coefficient was calculated using equations of thermal equilibrium. Finally, the prediction model for equivalent convection heat transfer coefficient including effects of velocity of wind, curing condition, ambient temperature and boiling effects was theoretically proposed. The convection heat transfer coefficient in the proposed model increases with velocity of wind, and its dependance on wind velocity is varied with curing condition. This tendency is due to a combined heat transfer system of conduction through form and convection to air. From comparison with experimental results, the convection heat transfer coefficient by this model was well agreed with those by experimental results.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.1
• /
• pp.27-32
• /
• 2011

The electorchemical properties of $Li_4Ti_5O_{12}$ added with Cr was tested. The addition or substitution of atoms to $Li_4Ti_5O_{12}$ are expected to modify the crystal structure, and therefore to change the electrochemical performances of $Li_4Ti_5O_{12}$. After the spinel structure $Li_4Ti_{5-x}Cr_xO_{12}$ (x = 0~0.2) were obtained via sol-gel method, the gel was heated in a muffle furnace at $800{\sim}850^{\circ}C$ for 12 h in air. The physical properties of the samples were characterized by TG-DTA, XRD, SEM, FT-IR, and the electrochemical properties were tested with battery cycler at 0.01~2.0 V range. The $Li_4Ti_5O_{12}$ exhibited 169.9 mAh/g at 1C and capacity recovery was 97.5% of the initial capacity at 0.1C. $Li_4Ti_{4.9}Cr_{0.1}O_{12}$ (Cr 1% added) showed best performance of 193.8 mAh/g at 1C and the capacity recovery was increased to 98.8% of the initial capacity at 0.1C.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.2
• /
• pp.105-112
• /
• 2017

In order to satisfy the diffusion of multimedia service in mobile communication and the demand for high-speed communication, it is essential to modify and improve high efficiency, wideband and nonlinear characteristic of multiband power amplifier. This research is designed to implement a single-stub matching circuit as a 2nd harmonic one that meets conditions of the Class-J power amplifier. Low characteristic impedance of the single-stub line is necessary to suit conditions of wideband Class-J. This research uses ceramic substrates having high permittivity to implement the single-stub line with low characteristic impedance, which eventually results in an amplifier satisfying the output impedance terms of Class-J in wideband frequency range. This result attributes to use of GaN HEMT packaged with a 2nd harmonic matching circuit and external fundamental circuit. The measurement results of the Class-J amplifier confirms the following characteristics: more than output power of 50 W(47 dBm) in bandwidth of 1.8~2.7 GHz(0.9GHz), maximum drain efficiency of 72.6 %, and maximum PAE characteristic of 66.5 %.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.4
• /
• pp.779-787
• /
• 2018

As security problems of the paper ballot have been emerged on and on, electronic voting with enhanced security and convenience has been introduced in several countries. However, it has not been adopted most of countries because of the problems that come from interdependence and security flaws. Meanwhile, the blockchain technology has high reliability due to the mechanism of mining that miners verify and preserve blocks independently by using P2P formation which does not have a central authority. Furthermore, because each block refers to the hash of the previous block. if any one block is changed, it is very difficult to forge and modify the blockchain because all blocks must be changed. If this technology is applied to the E-voting, integrity, and transparency about the result of the ballot is guaranteed. In this paper, we propose and implement an electronic voting system based on blockchain that improves interdependence, the reliability of excessive TTP and single point of failure come from original electronic voting. Also, we analyze the security and advantage of the proposal system compared with the existing bitcoin-based electronic voting system.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.319-327
• /
• 2015

This study can be summarized as follows : First, main participant, procedure and method of redevelopment of Inner port shall be additionally reviewed. Demands of stakeholder of Incheon Inner Port are actively accommodated to avoid the disruption in undertaking the project. Second, it must ensure the adequacy and appropriateness of policies regarding the redevelopment of the Inner Port in Incheon. It is necessary to obtain consent of people on this project. Third, appropriate system must be established to undertake the project. For this purpose, the governance system shall be built to collect the opinions of the people. The conclusions of this study are as follows. The national master plan and modify plans of Port redevelopment have been being undertaken based on Port Act. Incheon Inner Port redevelopment has been showing slight discrepancy with that of other ports. It's the essential part to coordinate the opinions and needs between the parties prior to the establishment of a redevelopment plan. This can be settled when it's warranted for dock workers to secure the job, and for port companies to provide replaceable piers as the precondition. In addition, eco-friendly waterfront leisure space shall be planned and alternative policies shall be arranged with accommodating the needs of local residents and merchants.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.4
• /
• pp.367-375
• /
• 2002

Inverse kinematics is a very useful method for control]ing the posture of an articulated body. In most inverse kinematics processes, the major matter of concern is not the posture of an articulated body itself but the position and direction of the end effector. In some applications such as 3D character animations, however, it is more important to generate an overall natural posture for the character rather than place the end effector in the exact position. Indeed, when an animator wants to modify the posture of a human-like 3D character with many physical constraints, he has to undergo considerable trial-and-error to generate a realistic posture for the character. In this paper, the Inductive Inverse Kinematics(IIK) algorithm using a Uniform Posture Map(UPM) is proposed to control the posture of a human-like 3D character. The proposed algorithm quantizes human behaviors without distortion to generate a UPM, and then generates a natural posture by searching the UPM. If necessary, the resulting posture could be compensated with a traditional Cyclic Coordinate Descent (CCD). The proposed method could be applied to produce 3D-character animations based on the key frame method, 3D games and virtual reality.