• Journal of Fashion Business
• /
• v.18 no.4
• /
• pp.45-65
• /
• 2014

The importance of the cultural identity of each country is emphasized among the new cultural paradigm of the 21st century. Leading world-wide trends, overseas licensed fashion magazines have expressed characteristics close to the culture and lifestyle of each country at the same time. The goal of this study was focused on finding out the differences and similarities between overseas licensed fashion magazine, or if the content would be compared to the aesthetic characteristics and criteria of the country they were published in. To accomplish this, we extracted the color, material and modifier from the scripts of the Korean and Japanese editions of VOGUE published during S/S in 2012 for comparative analysis of the aspects of color, fabrics and modifier between Japan and Korea. There were common but also unique characteristics, as the issues of VOGUE KOREA and VOGUE JAPAN published during the research period had modifier to fit each season and trend, the emergence of color and fabric. Especially, the kind and frequency of color, fabric and modifier could be considered as expressing their own unique fashion culture. In case of Korea, maximal with colorful and decorative image is especially strong, while in Japan the soft and gentle feminine image was rather strong.

• Elastomers and Composites
• /
• v.49 no.4
• /
• pp.284-292
• /
• 2014

Polymer has low mechanical strength than metal. In particular, the impact strength is very weak. Impact modifier reinforced polymers are frequently used. Impact strength of reinforced polymer is changed according to content and distribution of impact modifier. In this study, izod impact test has been simulated to analyze the mechanism of impact modifier reinforced Nylon 6. Computational results were compared for numbers and distributions of impact modifier. As the total volume of rubber particles decreased, the stress at the notch increased for the simulation model that the volume decreases as particle number increases. As the surface area of particle sphere increased, the stress and difference of principle stress increased for the simulation model that the total surface increases as particle number increases.

• Journal of Adhesion and Interface
• /
• v.19 no.4
• /
• pp.154-162
• /
• 2018

Plasma treatment and corona treatment have been used for surface modification of polydimethylsiloxane (PDMS) film by activating its surface with the -OH group. Adhesion promoter or coupling agent was also used to improve adhesion of PDMS film with various materials. However, obtained hydrophilicity onto the surface of PDMS films with those processes was transient and vulnerable. In this study, a new alkoxysilane-functionalized acrylic polymer precursor was first synthesized by copolymerization process, and then was reacted with HO-terminated PDMS through condensation reaction to prepare a new surface modifier for PDMS film. The structure and molecular weight of the prepared surface modifier were confirmed by 1H-NMR and GPC measurement. Surface properties of surface modifier-coated PDMS films were also investigated by using XPS, ATR and WCA analysis. The adhesion between the PDMS film and the surface modifier was tested using cross-cut test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4081-4086
• /
• 2014

Cellulose acetate butyrate (CAB) is a biodegradable resin with excellent optical properties, but it is difficult to apply film process. In this study, an attempt was made to improve the processability of CAB using polyactic acid and the mechanical properties using an impact modifier. Polylacitc acid (PLA)/Cellulose acetate butyrate (CAB) blends with an impact modifier were prepared using a twin screw extruder. The temperature range was $140^{\circ}C$ to $200^{\circ}C$, and the screw speed was fixed to 200 rpm. To evaluate the miscibility of impact modified CAB/PLA, the glass transition behavior and morphology were observed by DSC and FE-SEM. The mechanical properties were investigated by dynamic mechanical analysis (DMA) and a Universal Testing Machine (UTM). In addition, the effect of an impact modifier in the polymer matrix was determined using a notched Izod impact strength tester. Finally, the PLA/CAB/impact modifier 75/25/10 ratio was found to be a compatible system. In the 10wt.% impact modifier, the sample had a 4 times higher izod impact strength than the non-toughening composition.

• Journal of the Korean Chemical Society
• /
• v.40 no.2
• /
• pp.109-116
• /
• 1996

A matrix modification was studied for the determination of trace germanium in mineral waters by electrothermal atomic absorption spectrophotometry (ET-AAS). For this, the type and quantity of modifier as well as the use of auxiliary modifier were investigated to realize the efficient modification. Germanium suffers from low sensitivity and poor reproducibility in ET-AAS determination because of the premature loss of germanium via volatile germanium monoxide formation when heated in the presence of carbon. Therefore, the addition of a matrix modifier is necessary to stablize the germanium, thermally and chemically. By the addition of palladium (10 ${\mu}g/mL)$ as a single modifier to the sample containing 500 ng/mL germanium, the charring temperature could be raised from 800 to $1000^{\circ}C$, and its absorbance was also increased, but the atomization temperature was not raised. In this case, the absorbance of germanium was not changed in the range of 10∼70 ${\mu}g/mL$ of palladium added. On the other hand, it was considered that the use of a mixed modifier could modifiy the matrix more effectively than with a single modifier. The best results were obtained by using 1% ammonium hydroxide as an auxiliary modifier together with 10 ${\mu}g/mL$ palladium. The charring temperature could be raised from 800 to $1100^{\circ}C$, without any change of the atomization temperature. With above optimum conditions, the trace amount of germanium in several mineral waters were determined by a calibration curve method, and good recoveries of more than 95% were also obtained in the samples in which a given amount of germanium was spiked. The detection limit of this method was about 6.9 ng/mL.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.301-312
• /
• 1996

This study was performed to search a optimal analyzing method of cadmium in whole-blood. Cadmium was determined by graphite furnace atomic absorption spectrometry(GFAAS). We investigated the effect of ashing temperature on the absorbance of cadmium in a simple dilution(ten-fold) method with triton X-100 and matrix modifier methods treated with $NH_4H_2PO_4$(1 and 3%) and $Pd(NO_3)_2$(0.00l and 0.005%) as matrix modifier. We also compared the reported reference values of standard blood with values resulted from optimal analyzing conditions of this study. In case of a simple dilution method, when ashing temperature was set at $450^{\circ}C$, the absorbance of sample and background were $0.334{\pm}0.012$ and $1.382{\pm}0.245$, respectively. Background level was higher than the value(0.8) that can be corrected by $D_2$ background correction method. As ashing temperature was rised to $500^{\circ}C$, the absorbance of sample and background were $0.178{\pm}0.008$ and $0.711{\pm}0.223$ respectively. The higher ashing temperature($450^{\circ}C-650^{\circ}C$) was, the lower the absorbance of sample was. In case of a matrix modifier method with $NH_4H_2PO_4$(1 and 3%), when ashing temperature was rised from $500^{\circ}C$ to $650^{\circ}C$, the absorbance of sample slightly changed. The absorbances of sample at $600^{\circ}C$ were $0.230{\pm}0.017$ and $0.137{\pm}0.012$, respectively. These values were larger than that of simple dilution method. But the absorbance of background was higher than the level that can be corrected by $D_2$ method. In case of a matrix modifier method with $Pd(NO_3)_2$(0.001 and 0.005%), the absorbance of sample and background were higher than those of other methods and were stable and reproducible. When ashing temperature was over $550^{\circ}C$, the absorbance of sample was significantly decreased. In case of 0.005% $Pd(NO_3)_2$ carbon residue remained in graphite tube affected the absorbance of sample and background. From these results, We propose that in case of a simple dilution(ten-fold) method with triton X-100 ashing temperature must be maintained below $400^{\circ}C$. In order to diminish the absorbance of background, the alternative method is attenuation of injection volume or multiplication of dilution ratio. We recommend $Pd(NO_3)_2$ than $NH_4H_2PO_4$ as a matrix modifier. In case of a matrix modifier method with $Pd(NO_3)_2$ ashing temperature might be maintained below $550^{\circ}C$.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.343-350
• /
• 2023

Based on Lung CT Screening Reporting and Data System (Lung-RADS), which has been used to standardize reading for lung cancer screening since November 2016, the types and frequency of "S" modifier findings other than lung cancer were analyzed. As a result of this study, 360 cases (35.19%) of "S" modifier were found in 1,023 subjects, and the most frequent diseases were coronary calcification and emphysema, 145 (14.17%) of coronary calcification and 138 (13.49%) of emphysema, indicating that the discovery rate was very high compared to other findings. In addition, it was found to be highly associated with the duration of smoking, and in the case of coronary calcification, 9 cases (5.73%) were found in the non-smokers group A, 23 cases (11.44%) within 10 years of smoking, 39 cases (13.68%) in the C group within 20 years of smoking, and 31% of the E group over 30 years of smoking. In addition to coronary calcification and emphysema, abnormal findings of pneumonia, lung epilepsy, and mediastinal disease were also found to be p<0.05 as a result of the analysis of the association with the smoking period, indicating that the smoking period was affected.

• Journal of Preventive Medicine and Public Health
• /
• v.23 no.3 s.31
• /
• pp.247-254
• /
• 1990

짝짓기 방법은 교란변수를 통제하기 가장 좋은 방법으로 알려져 있으나, 모수추정시 그 계산방법이 복잡하고, 포함된 모든 정보를 이용할 수 없다는 단점을 갖고 있다. 그럼에도 불구하고, conditional 모델을 이용한 matched 분석법은 짝지은 자료 분석시 가장 좋은 방법으로 인정되고 있다. 그러나 명확한 confounding 현상을 통제할 목적이 아닌 상태에서 짝지워진 자료를 matched 분석법으로 모수추정하는 경우나, 올바로 짝지워진 자료를 분석법의 편이성 때문에 unmatched 분석을 시도하는 경우, 오히려 estimation bias가 야기될 수 있다. 이러한 estimation bias의 통제능력을 몇 가지 분석방법을 이용하여 비교하고자, 1:2로 대응된 한 환자-대조군 자료를 이용하여 Mantel-Haenszel 분석법, 두가지의 unconditional model을 이용한 다변량분석법의 결과를 conditional model을 이용한 matched 분석법의 결과와 비교하였다. 1. Matched 분석법의 대용방법으로 사용된 세 가지 방법들은 모수추정면에서나 가설검정능력면에서 차이를 서로 보이지 않았다. 2. 짝짓기에 사용된 변수가 분석자료내에서 confounder나 effect modifier로 작용되지 않았음이 명백한 경우에는 이들 세 가지 통제 방법과 matched 분석법간에 차이가 없었다. 3. 짝짓기에 사용된 변수가 분석자료내에서 effect modifier로 작용하지는 않았으나, Confounder로 작용한 것으로 추정되는 경우, unmatched 분석법으로 인해 야기된 estimation bias의 통제능력이 이들 세 가지 대용방안 모두에서 인정되었다. 4. 짝짓기에 사용된 변수가 분석자료내에서 effect modifier로 작용하고 있음을 직접 확인할 수 있는 경우에는, overmatching에 의한 estimation bias를 의심할 수 있었으며, 이들 세 가지 통제방법은 오히려 unmatched 분석 방법에 가까운 모수를 추정하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.2
• /
• pp.126-133
• /
• 2013

This paper presents a study on the dispersion effect of the X-Ray diffraction, glass transition and DMA properties of organic modifier clay/epoxy nanocomposites produced in a homogenizer. Several experiments were conducted including different types of dispersion condition with varying processing conditions such as homogenizer rotor speed and applied time of homogenizer. The effects of these variables on the dispersion properties of nanocomposites were then studied. In order to fully understand the experimental results, a X-ray diffraction, DSC and DMA were used to investigate the effect of above mentioned variables on microstructure and intercalation/exfoliation of organic modifier clay/epoxy nanocomposites. The results from this work could be used to determine the best processing condition to obtain appropriate levels of d-spacing, glasss transition temperature and storage modulus in organic modifier clay/epoxy nanocomposites.

• Elastomers and Composites
• /
• v.43 no.2
• /
• pp.72-81
• /
• 2008

Nowadays, modifying asphalt to improve the resistancy of plastic deformation or rutting on roads has been drawing attention. In this study, asphalts were modified with modifying agents and ground rubber from waste tire (GRT), and the effects of modifier and GRT on the properties of asphalt were analyzed. The Marshall stability of modified asphalt was increased by 98% and the tensile strength increased by 43% compared to straight asphalt. GRT played an important role in enhancing these properties. Viscosity tests, penetration tests and TMA analysis showed the deformation resistancy of modified asphalt. IR and GPC tests indicated that asphalt and modifier have similar chemical structures to each other, and chemical bonding between asphalt and modifier have occurred so that the molecular size lengthened.