• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.373-376
• /
• 2000

The modified Moonie(Cymbal) transducer has been investigated for an accelerometer application. This paper present a wind-mill type ultrasonic motors using ternary piezoelectric ceramics and aluminum endcaps applied by cymbal transducer. The maximum displacement was increased depend on applied voltage and layer number. The multi-layer was fabricated by tape casting using doctor-blade process. The maximum displacement of multi-layered ultrasonic motor was much higher than that of one-layered.

• 정보보호학회논문지
• /
• 제22권6호
• /
• pp.1253-1263
• /
• 2012

그룹응용이 늘어감에 따라 효율적인 인증 그룹 키 합의 프로토콜이 많은 관심을 받고 있다. Lee et al.는 삼진트리 구조와 pairing기반의 암호방식을 가진 트리기반의 그룹 키 합의 프로토콜을 제안했다. 그들의 프로토콜은, 모든 멤버들의 세션랜덤 키를 아는 오직 한 명의 그룹 스폰서가 블라인드 키들을 계산한다. 또, 그 스폰서가 그룹을 떠나면, 트리의 모든 정보가 바뀌어져야 한다. 본 논문에서 제안하는 프로토콜은 여러 명의 스폰서를 두었고, 각 멤버의 비밀정보가 그룹스폰서에게 알려지지 않으므로 그룹스폰서가 떠났을 때, 키 갱신이 Lee et al.의 프로토콜보다 훨씬 효율적이다. 그러므로, 제안된 프로토콜은 동적 피어 그룹에 적합하다.

• 한국표면공학회지
• /
• 제49권1호
• /
• pp.40-45
• /
• 2016

Recently, $Bi_2Te_3$-based alloys are the best thermoelectric materials near to room temperature, so it has been researched to achieve increased figure of merit(ZT). Ternary compounds such as Bi-Te-Se and Bi-Sb-Te have higher thermoelectric property than binary compound Bi-Te and Sb-Te, respectively. Compared to DC plating method, pulsed electrodeposition is able to control parameters including average current density, and on/off pulse time etc. Thereby the morphology and properties of the films can be improved. In this study, we electrodeposited n-type ternary Cu-doped $Bi_2(Te-Se)_3$ thin film by modified pulse technique at room temperature. To further enhance thermoelectric properties of $Bi_2(Te-Se)_3$ thin film, we optimized Cu doping concentration in $Bi_2(Te-Se)_3$ thin film and correlated it to electrical and thermoelectric properties. Thus, the crystal, electrical, and thermoelectric properties of electrodeposited $Bi_2(Te-Se)_3$ thin film were characterized the XRD, SEM, EDS, Seebeck measurement, and Hall effect measurement, respectively. As a result, the thermoelectric properties of Cu-doped $Bi_2(Te-Se)_3$ thin films were observed that the Seebeck coefficient is $-101.2{\mu}V/K$ and the power factor is $1412.6{\mu}W/mK^2$ at 10 mg of Cu weight. The power factor of Cu-doped $Bi_2(Te-Se)_3$ thin film is 1.4 times higher than undoped $Bi_2(Te-Se)_3$ thin film.

• 열처리공학회지
• /
• 제2권2호
• /
• pp.68-83
• /
• 1989

Physical metallurgy aspects of gaseous ferritic nitrocarburising are reviewed in the light of basic studies undertaken since 1975 which have illustrated inconsistencies between the iron-carbon-nitrogen ternary phase diagram at $570^{\circ}C$ and the experimental observation of the co-existence of the ${\varepsilon}$ carbonitride phase and ferrite. Thermodynamic investigations by Xu and Li together with those by Slycke et al are reviewed to illustrate compatability between a modified isothermal section of the Fe-C-N system and the formation and growth of a monophased ${\varepsilon}$ structure under a variety of processing conditions. The implications of the modified diagram in terms of innovations in industrial ferritic nitrocarburising practice are discussed, together with limitations on the control of the process. The importance of the developing technology of black nitrocarburising for enhanced wear, fatigue, and corrosion resistance is emphasised. Basic studies and industrial status of austenitic nitrocarburising treatments are also reviewed, which highlight the importance of substrate strengthening for high load bearing applications of anti-scuff thermochemical treatments.

• Bulletin of the Korean Chemical Society
• /
• 제29권5호
• /
• pp.939-942
• /
• 2008

Photoelectrochemical deposition of CdZnSe thin films on the Se-modified Au electrode using electrochemical quartz crystal microgravimetry (EQCM) and voltammetry is described. Corrosion of pre-deposited Se electrodes by illumination at a fixed potential resulted in $Se^{2-}$ species, which was manifest from the EQCM frequency changes. $Se^{2-}$ species generated from the photocorrosion reacted with $Cd^{2+}$ and $Zn^{2+}$ ions in the electrolyte to form CdZnSe films on the Au electrode. The effect of electrolyte composition on the composition and band gap of CdZnSe films was studied in detail. Also, photoelectrochemistry, EDX, Raman spectroscopy were used for the characterization of CdZnSe thin films.

• Corrosion Science and Technology
• /
• 제6권3호
• /
• pp.133-139
• /
• 2007

Nickel powder was coated with aluminum nitrate solution to increase the thermal stability of a porous nickel support and control the nickel content in the Pd-Cu-Ni ternary alloyed membrane. Raw nickel powder and alumina coated nickel powder were uniaxialy pressed by home made press with metal cylindrical mold. Though the used nickel powder prepared by pulsed wire evaporation (PWE) method has a good thermal stability, the porous nickel support was too much sintered and the pores of porous nickel support was plugged at high temperature (over $800^{\circ}C$) making it not suitable for the porous support of a palladium based composite membrane. In order to overcome this problem, the nickel powder was coated by alumina and alumina modified porous nickel support resists up to $1000^{\circ}C$ without pore destruction. Furthermore, the compositions of Pd-Cu-Ni ternary alloy membrane prepared by magnetron sputtering and Cu-reflow could be controlled by not only Cu-reflow temperature but also alumina coating amount. SEM analysis and mercury porosimeter analysis evidenced that the alumina coated on the surface of nickel powder interrupted nickel sintering.

• Advances in materials Research
• /
• 제9권3호
• /
• pp.203-218
• /
• 2020

This research paper presents the outcomes in terms of mechanical and microstructural characteristics of binary and ternary concrete when exposed to elevated temperature. Three parameter were taken into account, (a) elevated temperature (i.e., 200, 400, 600 and 800℃) (b) binary concrete with cementitious material sugarcane bagasse ash (SCBA) and ground granulated blast furnace slag (GGBFS) replacement percentage (i.e., 0, 15, 20, 25 and 30%) and (c) ternary concrete with cementitious material SCBA and GGBFS replacement percentage (i.e., 0, 15, 20, 25 and 30%). A total of 285 standard cube specimens (150 mm × 150 mm × 150 mm) containing Ordinary Portland Cement (OPC), SCBA, and GGBFS were made. These specimens then exposed to several elevated temperatures for 2 h, afterword is allowed to cool at room temperature. The following basic physical, mechanical, and microstructural characteristics were then determined and discussed. (a) mass loss ratio, (b) ultrasonic pulse velocity (UPV) (c) physical behavior, (d) compressive strength, and (e) field emission scanning electron microscope (FESEM). It was found that compressive strength increases up to 400℃; beyond this temperature, it decreases. UPV value and massloss decrease with increase in temperature as well as the change in color and crack were observed at a higher temperature.

• 한국지형학회지
• /
• 제27권3호
• /
• pp.1-11
• /
• 2020

A CIA analysis (A-CN-K and A-CNK-FM ternary diagram) indicates that, unlike the general granitic hills of the Korean Peninsula, the chemical weathering of the granitic grus (sandy regolith) in the eastern Jincheon basin is variable in geomorphic site except the Chuncheon basin. In the study area, there are three types of hills, such as; inner hills, linear isolated hills, and outer hills. The weathered mantles of the outer hills and linear isolated hills are weakly altered, whereas the inner hill, the Bonghyeon profile, shows a stronger chemical loss of the compositions approximating saprolite. There are small differences between the outer hills and linear isolated hills. The Geumwang site is considered fresh rock due to a low lever of alteration, although its sampling profile shows sandy weathering mantles. In the profiles of the Masan and Mugeuks sites, the lower part of weathering mantles has not experienced a significant level of component loss, but the upper regoliths have substantially been modified. The alteration of the hills occurs by chemical loss of CaO and Na₂O. K₂O exhibited little variation at all sampling suites and it has not changed into saprolite.

• 한국건축시공학회지
• /
• 제16권4호
• /
• pp.321-329
• /
• 2016

포틀랜드 시멘트, 고로슬래그 미분말, 플라이애시를 활용한 3성분계 혼합시멘트는 해양 콘크리트 구조물의 염해내구성 확보 등의 이유로 사용이 증가하고 있다. 이에 따라 본 연구에서는 보통포틀랜드 시멘트, 고로슬래그 미분말, 플라이애시를 4:4:2로 혼합한 3성분계 시멘트에 알칼리 설페이트계 활성화제(Modified Alkali Sulfate type)를 1.5~2.0% 사용할 때, NT Build 492에 의한 염화물 확산 시험과 ASTM C 1202( KS F 2271)에 의한 염소이온 침투 저항성 시험을 이용하여 콘크리트의 염해저항성의 변화를 관찰하고자 하였다. 그 결과 알칼리 설페이트계 활성화제의 활용에 따라 Plain 대비 슬럼프는 다소 감소하는 경향을 나타냈으나 재령 2일부터 재령 7일까지의 압축강도는 17~42% 향상되었다. 또한 재령 28일에 측정한 염화물 확산 계수는 알칼리 설페이트의 활용에 따라 Plain 대비 36~56% 감소하였으며, 염소이온 침투 저항성 시험에 따른 총통과전하량은 재령 7일은 33~62%, 재령 28일은 31~48% 감소하는 결과를 나타내었다. 이는 기존의 연구결과와 마찬가지로 알칼리 활성화에 의해 고로슬래그 미분말 및 플라이애시의 반응성이 향상되어 공극이 더욱 치밀해진 효과에 의한 것으로 판단된다. 향후 이와 관련하여 장기재령의 시험체를 대상으로 한 실험과 분석이 지속적으로 이루어져야 할 것으로 판단된다.

• Elastomers and Composites
• /
• 제34권1호
• /
• pp.20-30
• /
• 1999

본 연구는 용융법에 의한 폴리아미드 6,6(PA 6,6)과 에틸렌-프로필렌 고무(EPM) 및 무수 말레인산 그라프팅 EPM(EPM-g-MA)과 블랜딩시 탄성중합체 함유량 변화에 따른 이성분 PA 6,6/ EPM[EPM-g-MA] 블랜드물과 EPM:EPM-g-MA 조성비(wt%) 변화에 따른 삼성분 PA 6,6/ EPM/EPM-g-MA 블랜드물을 제조하여 블랜드물 내 탄성중합체의 평균 입자크기, 입자 형상 및 분포 등의 변화를 분석하고 이에 따른 블랜드물의 기계적, 열적 특성변화를 고찰하였다. 본 연구결과, 이성분 블랜드물 중 PA 6,6/EPM-g-MA 블랜드물은 PA 6,6/EPM 블랜드물에 비하여 EPM-g-MA의 평균 입자크기와 분포, 충격강도 및 상대결정화도 등이 향상되었고 PA 6,6/ EPM-g-MA 블랜드물 중 가장 큰 충격강도의 향상을 보인 PA 6,6/EPM-I-MA(70/30) 블랜드물은 폴리아미드 6,6의 충격강도에 비하여 약 25배 향상되었으며 상대결정화도는 약 7배 증가하였다. 그리고 삼성분 블랜드물 중 조성비가 70:15:15(PA 6,6 :EPM:EPM-g-MA)일 때 블랜드물 내탄성중합체 평균 입자크기는 $0.56{\mu}m$이면서 고른 입자분포를 얻을 수 있었을 뿐만 아니라 이러한 블랜드물의 충격강도는 제조된 모든 블랜드물의 충격강도에 비하여 가장 높았다.