• Architectural research
• /
• 제2권1호
• /
• pp.47-54
• /
• 2000

The critical load of a continuous compression member was determined by the beam-analogy method. The proposed method utilizes the stress-analysis results of the analogous continuous beam, where imaginary concentrated lateral load changing its direction is applied at each midspan. The proposed method gives a lower bound error of critical load and can predict the span that buckles first. The effective length factors for braced frame columns can be easily determined by the present method, but result in the upper bound errors in all cases, which can lead to a conservative structural design.

• Structural Engineering and Mechanics
• /
• 제58권6호
• /
• pp.949-966
• /
• 2016

The second order analysis taking place due to non-linear behavior of the structures under the mechanical and geometric factors through implementing exact and approximate methods is an indispensible issue in the analysis of such structures. Among the exact methods is the slope-deflection method that due to its simplicity and efficiency of its relationships has always been in consideration. By solving the differential equations of the modified slope-deflection method in which the effect of axial compressive force is considered, the stiffness matrix including trigonometric entries would be obtained. The complexity of computations with trigonometric functions causes replacement with their Maclaurin expansion. In most cases only the first two terms of this expansion are used but to obtain more accurate results, more elements are needed. In this paper, the effect of utilizing higher order terms of Maclaurin expansion on reducing the number of required elements and attaining more rapid convergence with less error is investigated for the Bernoulli beam with various boundary conditions. The results indicate that when using only one element along the beam length, utilizing higher order terms in Maclaurin expansion would reduce the relative error in determining the critical buckling load and kinematic parameters in the second order analysis.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.8-15
• /
• 1995

This analytical study was carried out to make quality and productivity up in designing the frame-type furniture with semi-rigid joint by understanding the mechanical and structural behavior of the joint and by evaluating the validity of application of the time-saving Finite Element Method to its structural analysis. Slope deflection equation for rigid joint was modified to describe the moment-rotation behavior of semi-rigid joint and the joint stiffness factor(Z) could be calculated to lessen the experimental expense. It was proved that Finite Element Analysis with imaginary elements having equivalent MOE to the semi-rigid joint could be the alternative method for the structural analysis of the frame-type furniture, comparing the internal rotation of the 2-dimensional beam-to-column model with two-pin(wooden dowel) from the finite element method with other available theoretical and experimental rotation value.

• 한국강구조학회 논문집
• /
• 제11권1호통권38호
• /
• pp.13-22
• /
• 1999

본 연구에서는 처짐각법을 개선하여 강박스형교의 뒤틀림 거동을 분석할 수 있는 프로그램을 개발하였다. 박스거더의 뒤틀림 거동을 분석하는 대표적인 방법으로 BEF유사법과 EBEF법이 있으나, 전자는 등단면에 국한되고 경계조건에 따른 적분상수를 계산하기 위해 복잡한 삼각함수를 적용해야 하는 번거로움이 있다. 후자는 격벽의 강성을 무한으로 하여 연속보로 해석하는 근시적인 수치해석 방법이다. 따라서 본 연구에서는 변단면과 격벽의 강성을 해석에 반영할 수 있는 방법을 개발하였다. 몇 가지 예제 해석을 통하여 본 연구에서 개발한 프로그램의 타당성을 검증하였고, 격벽의 강성에 따른 매개변수 연구를 수행하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.306-313
• /
• 1998

Contrary to reinforced concrete frames, the beams or girders found in actual steel frames are neither hinged nor fixed at their ends. Instead, they are usually restrained by the columns to which they are attached. Here in this paper, common finite element program for plane frame stress analysis is improved by including the effect of partial fixities of the girder ends. To include the effect of partial fixities of the girder ends, Kim's modified slope-deflection equation is adopted. The stress analysis results obtained by this proposed method are then compared with Kim's example. Finally, method of choosing the most economic girder section for a multi-story frame is suggested through the examples.

• 한국지반공학회지:지반
• /
• 제7권4호
• /
• pp.75-88
• /
• 1991

국토의 70%가 산지인 우리나라에서는 6월에서 9월 사이의 우기에 많은 산사태가 발생하고 있 다. 이러한 산사태를 방지하기 위한 대책공법의 하나로 억지말뚝공이 사용될 수 있다. 산사태와 같 은 측방이동지반속에 억지말뚝이 일렬로 설치되어 있으면 말뚝사이의 지반은 아칭현상에 의하여 지지될 수 있다. 억지말뚝의 합리적설계 법을 확립하기 위하여 측방이동지반속의 말뚝에 작용하는측방토압산정 식을 사용하여 억지말뚝이 설치된 사면의 안정 해석법이 제안된다. 특히 이 이론식은 측압계수를 사용하므로서 간편한 형태의 식으로 정 리된다. 또한 활동면 상부 말뚝부분에 지반반력이 말뚝변위 에 비 례하여 작용한다고 가정하므로 이전 연구에서 이미 제안된 말뚝안정 해석을 위한 미분방정식 이 수정 제안된다. 마지막으로 산사태 발생이 예정되었던 우리나라 사면의 한예를 대상으로 산사태억지말뚝의 사면안정 효과가 조사된다.