• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2016-2021
• /
• 2003

This paper deals with a control technique of eliminating the transient vibration with respect to a waist axis of an articulated robot. This control technique is based on a model-based control in order to establish the damping effect on the driven mechanical part. The control model is composed of reduced-order electrical and mechanical parts related to the velocity control loop. The parameters of the control model can be obtained from design data or experimental data. This model estimates a load speed converted to the motor shaft. The difference between the estimated load speed and the motor speed is calculated dynamically, and it is added to the velocity command to suppress the transient vibration. This control method is applied to an articulated robot regarded as a time-invariant system. The effectiveness of the model-based control integrated into the position control loop is verified by simulations. Simulations show satisfactory control results to reduce the transient vibration at the end-effector.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.3
• /
• pp.253-259
• /
• 2014

This study proposes a map-based control method to improve a vehicle's lateral stability, and the performance of the proposed method is compared with that of the conventional model-referenced control method. Model-referenced control uses the sliding mode method to determine the compensated yaw moment; in contrast, the proposed map-based control uses the compensated yaw moment map acquired by vehicle stability analysis. The vehicle stability region is calculated by a topological method based on the trajectory reversal method. The performances of model-referenced control and map-based control are compared under various road conditions and driving inputs. Model-referenced control uses a control input to satisfy the linear reference model, and it generates unnecessary tire lateral forces that may lead to worse performance than an uncontrolled vehicle with step steering input on a road with low friction coefficient. The simulation results show that map-based control provides better stability than model-referenced control.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.83.2-83
• /
• 2002

1. Introduction 2. Twin-Drive Geared Mechanical System 3. Reduced-Order Control Model 4. Model-Based Control System 5. Suppression of Transient Vibration 6. Effects of Model-Based Control 7. Conclusions

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.50.2-50
• /
• 2002

1. Introduction 2. Reduced-Order Model of Robot System 3. Model-Based Control 4. Simulation Results 5. Experimental Results and Considerations 6. Conclusions

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1392-1397
• /
• 2003

This paper deals with a control technique of eliminating the transient vibration of a twin-drive geared mechanical system. This technique is based on a model-based control in order to establish the damping effect at the driven machine part. The control model is composed of reduced-order electrical and mechanical parts. This control model estimates a load speed converted to the motor shaft. The difference between the estimated load speed and the motor speed is calculated dynamically and it is added to the velocity command to suppress the transient vibration generated at the load. This control technique is applied to a twin-drive geared system with backlash. In the previous work, the performance of this control method is examined by simulations. In this paper, the effectiveness of this control technique is verified by experiments. The settling time of the residual vibration generated at the loading inertia can be shortened down to about 1/2 of the uncompensated vibration level.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.2-2
• /
• 2000

This paper presents an adaptive control against uncertainties in tail-controlled STT (skid-to-Turn) missiles. First, we derive an analytic uncertainty model from a parametricaffine missile model developed by the authors. Based on this analytic model, an adaptive feedbacklinearizing control law accompanied by a sliding model control law is proposed. We provide analyses of stability and output tracking performance of the overall adaptive missile system. The performance and validity of the proposed adaptive control scheme is demonstrated by simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.1
• /
• pp.65-71
• /
• 2016

This study investigates a high-accuracy alternate QD model to estimate the characteristics of induction motor under light loads. To demonstrate the usefulness of the alternate QD model, a maximum torque per amp (MTPA) control based on the alternate model is shown to outperform MTPA control based on the standard QD model. The experimental study conducted in this work exhibits that the MTPA control based on the alternate QD model tracks torque commands between 20 Nm and 30 Nm with 5% error, whereas the MTPA control based on the standard QD model generates torques lower by over 23% compared with the aforementioned torque commands. This result indicates that the alternate QD model is a highly accurate model for induction motors under light loads.

• Advances in aircraft and spacecraft science
• /
• v.1 no.4
• /
• pp.427-441
• /
• 2014

Orbit-raising is an important step to place spacecraft from parking orbits into working orbits. Attitude control system design is crucial in the success of orbit-raising. Several text books have discussed this design and focused mainly on the traditional methods based on single-input single-output (SISO) transfer function models. These models are not good representations for many orbit-raising control systems which have multiple thrusters and each thruster has impact on the attitude defined by all outputs. Only one published article is known to use a more suitable multi-input multi-output (MIMO) Euler angle model in spacecraft orbit-raising attitude control system design. In this paper, a quaternion based MIMO model for the orbit-raising attitude control system design is proposed. The advantages of using quaternion based model for orbit-raising control system designs are (a) there is no need for mathematical transformations because the attitude measurements are normally given by quaternion, (b) quaternion based model does not depend on rotational sequences, which reduces the chance of human errors, and (c) the singular point of reduced quaternion model is the farthest from the operational point where linearization is performed. We will show that performance of quaternion model based design will be as good as the performance of Euler angle model based design for orbit-raising problem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.167-175
• /
• 2005

Privacy enforcement has been one of the most important problems in IT area. Privacy protection can be achieved by enforcing privacy policies within an organization's online and offline data processing systems. Traditional security models are more or less inappropriate for enforcing basic privacy requirements, such as purpose binding. This paper proposes a new approach in which a privacy control model is derived from integration of an existing security model. To this, we use an extended role-based access control model for existing security mechanism, in which this model provides context-based access control by combining RBAC and domain-type enforcement. For implementation of privacy control model we use GRBAC(Generalized Role-Based Access Control), which is expressive enough to deal with privacy preference. And small hospital model is considered for application of this model.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.318-322
• /
• 1996

In this study, a controller design method is proposed for controlling the discrete-time chaotic systems efficiently. Our proposed control method is based on Generalized Predictive Control and uses NARMAX models as a controlled model. In order to evaluate the performance of our proposed controller design method, a proposed controller is applied to Henon system which is a discrete-time chaotic system, and then the control performance of the proposed controller are compared with those of the previous model-based controllers through computer simulations. Through simulations, it is shown that the control performance of the proposed controller is superior to that of the conventional model-based controller.