• Geophysics and Geophysical Exploration
• /
• v.21 no.1
• /
• pp.8-14
• /
• 2018

For the purpose of maintenance and prevention of earth fill dams against damage from natural hazards, automatic monitoring through various measuring instruments and resistivity survey has been carried out. Reservoirs and embankments have the structural vulnerability on the agricultural usages since most of them were built more than thirty years ago. The main aim to use monitoring method is to verify the safety and integrity of the dam. Resistivity survey can detect potential weaknesses, such as defective zones, anomalous seepages or internal erosion processes. Permanent resistivity monitoring systems were installed at a reservoir, which daily measurements have been taken every 6 hour. Using monitoring data for one year, anomalous seepage and structural defects were clarified for dam safety. Annual water level fluctuations are around 10 m. During their operation, reservoir dams are subject to a never-ending hydraulic load from the reservoir, which over the years may cause changes in the properties of the inner parts of the dam construction. Detailed analysis of the monitoring results was performed and showed that resistivities at most locations have been very stable over the full monitoring period excluding the effects of water fluctuation and seasons. To investigate the detectability of weak zone using the DC resistivity monitoring, numerical modeling with a simplified model for the drainage at a reservoir dam was also performed. The results showed that the seepage zone near drainage in a reservoir dam could be detected by resistivity response change.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.32
• /
• pp.255-266
• /
• 1994

This study does present things to suggest to foreign multinational corporation or domestic corporation through the empirical study on the standardization level. If we summary this study, it is as follows. In chapter I, we did institute the problems and explain the objects and methods and system of the study. In chapter II, we did explain the universality of the culture and international advertisement. Next, we did explain the background of doing specialization strategy and standardization strategy. Also we did study the previous study about the arguements for and against these. Lsat we did institute the hypothesises as follows. - Hypothesis 1 $H_0$ : The use of westerner appeal means has been increased than 11 years before and is able to increase continuously. - Hypothesis 2 $H_0$ : The use of westerner model and knowned has been increased than 11 years before and is able to increase continuously. - Hypothesis 3 $H_0$ : The use of the English language has been increased than 11 years before and is able to increase continuously. - Hypothesis 4 $H_0$ : The use of the west short piece and background has been increased than 11 years before and is able to increase continuously. In chapter III, we did refer to the method of this study. First, we did adjust the measure of standardization index, and we did work coding it, such after the two coder did check the freguency of the appeal meanstype about the advertisement of four daily report. Then we did select eight production as high involvement production and seven production as low involvement. We did test the coder's trust degree on the such sample to be selected through the 't-test' of the SAS statistic program and regression analysis through the spss/$pc^+$ statistic program to approve the this study's hypothesises. In chapter IV, we did analysis the results of the empirical study on the high or low involvement productions. First, the results of t-test to approve the coder's trust degree is that it is same statistically attentionly the distribution of the sample between coder at 10% attention level. Next, the results of the regression analysis on eight hypothesises are as fellows. In case of high involvement production we are able to speak that the use of the English language appeal among the eight appeals is only standardized. And incase of low involvement production, we are able to speak that the use of the hard-sell appeal among the eight appeds is only standardized. Therefore we did conclude that the standardization level of Korea newspaper advertisement is low. Also this suggests that it will do plan and do the specialzation strategy or localization strategy foreign multinational corporation or domestic corporation in Korea newspaper advertisement. In chapter V, we do present the boundary of this study and new study methods.

• Journal of Korean Society of Rural Planning
• /
• v.23 no.1
• /
• pp.85-96
• /
• 2017

Existing agricultural reservoirs are considered as alternative source for the water welfare of rural area. In this study, domestic water supply potential of 476 reservoirs, which has storage capacity more than one million cubic meter, out of 3,377 agricultural reservoirs managed by Korean Rural Community Corporation (KRC) were investigated. Among them water quality of 136 reservoirs met the criteria of domestic water source which show less than COD 3 ppm. Available amount for domestic water of reservoirs, which meet the water quality, for ten year return period of drought was analyzed with reservoir water balance model. The results showed that 116 reservoirs has potential for supplementary domestic water supply while satisfying irrigation water supply. Finally, economic analysis using Net Present Value (NPV), Benefit-Cost (B/C) ratio, Internal Rate of Return (IRR), and Profitability Index (PI) methods was also conducted. The analysis showed that 19 reservoirs satisfied economic feasibility when water is provided from reservoir outlet but only 9 reservoirs meet the economic feasibility if water delivered from a reservoir to treatment plant by newly built conveyance canal. In order to supply the domestic water through the agricultural reservoirs managed by KRC, it is necessary to flexibly interpret and operate the 'Rearrangement of Agricultural and Fishing village Act'. Also, it is reasonable to participate in the water service business when there is a supply request from other Ministries. In addition, the KRC requires further effort to change the crop system for saving water and improve efficiency of irrigation systems.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.2
• /
• pp.17-26
• /
• 2001

The Purpose of this study is to provide an effective way of developing GIS to UIS at the local level. For this purpose, the study typologically reviews the developing processes of UIS and utilizes a case study as research method. As the case, the study selects three types of UIS such as FM based UIS(Kwacheon), Urban Planning based UIS(Cheungju), and LIS based UIS(Taegu Nam-Gu). Based on these three UISs, the study concludes as follows. First, the developing process of GIS to UIS began with isolated approach through integrated model and finally to internet UIS. Second, UISs follows similar processes to that of GIS construction. Third, local governments focus on the development of FM based UIS of which construction budget is financed by the central government. Based on these findings, the study provides policy alternatives for the successful construction of UIS.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.89-98
• /
• 2015

This paper provides a robust and non-fragile $H_{\infty}$ controller design algorithm for time-delayed systems with randomly occurring polytopic uncertainties and disturbances. First, we design time-delayed system considering randomly occurring uncertainties and disturbances. Next, The sufficient condition for the existence of robust and non-fragile $H_{\infty}$ controller is presented by LMI(linear matrix inequality) using Lyapunov stability analysis and $H_{\infty}$ performance measure. Since the obtained condition can be expressed as a PLMI(parameterized linear matrix inequality) by changes of variables and Schur complement, all solutions including controller gain, degrees of controller satisfying non-fragility, $H_{\infty}$ norm bound ${\gamma}$ can be calculated simultaneously. Finally, numerical examples are given to illustrate the performance and the effectiveness of the proposed robust and non-fragile $H_{\infty}$ controller compared with the deterministic uncertainty model even though there exists randomly occurring uncertainties, disturbances and time delays.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.55-65
• /
• 2016

Detecting an object which is located at seabed is an important issue for various areas. This paper presents an approach to detection of an object that is placed at seabed in the shallow water. A conventional scheme is to employ a side-scan sonar to obtain images of a detection area and to use image processing schemes to recognize an object. Since this approach relies on high frequency signals to get clear images, its detection range becomes shorter and the processing time is getting longer. In this paper, we consider an active sonar system that is repeatedly sending a linear frequency modulated signal of 6~20 kHz in the shallow water of 100m depth. The proposed approach is to model consecutively received reflected signals and to measure their modeling error magnitudes which decide the existence of an object placed on seabed depending on relative magnitude with respect to threshold value. The feature of this approach is to only require an assumption that the seabed consists of an homogeneous sediment, and not to require a prior information on the specific properties of the sediment. We verify the proposed approach in terms of detection probability through computer simulation.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.829-835
• /
• 2018

Recently, studies have been actively conducted to reduce spare power that is unnecessarily generated or wasted in existing power systems and to improve energy use efficiency. In this study, smart meter, which is one of the element technologies of smart grid, is implemented to improve the efficiency of energy use by controlling power of electric devices, and predicting trends of energy usage based on deep learning. We propose and develop an algorithm that controls the power of the electric devices by comparing the predicted power consumption with the real-time power consumption. To verify the performance of the proposed smart meter based on the deep running, we constructed the actual power consumption environment and obtained the power usage data in real time, and predicted the power consumption based on the deep learning model. We confirmed that the unnecessary power consumption can be reduced and the energy use efficiency increases through the proposed deep learning-based smart meter.

• Journal of the Korean earth science society
• /
• v.30 no.3
• /
• pp.305-316
• /
• 2009

Experiments to explain fossilization have been introduced in elementary and middle school science textbooks. Most of them have explained the processes by the mold and cast formed by imprint of bivalve or leaf. The processes explained in the textbooks are more similar to that of trace fossil than body fossil, because the external molds from experiment are imprints after the model was taken off. However fossils of the figures in the textbooks are mostly body fossils. Therefore, the students may be willing to equate the experiment process with the fossilization of the body fossils. The misconceptions were confirmed in this study by the questionnaire which asked 9th grade students on this subject. Many students thought that the body fossils were fossilized imprints and the fossils of terrestrial organism were formed on land without transportation, that is, they did not understand well about biostratinomy and crustal movement. The misconception about the environment in which fossils formed was already reported in a survey on the elementary school students, but has not revised until ninth grade. Therefore, to remove the misconception related to the fossilization, the fossil models in the experiments may be replaced by trace fossils, or new experiments for body fossil should be designed.

• Journal of Radiation Protection and Research
• /
• v.45 no.3
• /
• pp.101-107
• /
• 2020

Background: An important lesson learned from the Fukushima accident is that the transition to the mid- and long-term phases from the emergency-response phase requires less than a year, which is not very long. It is necessary to know how much radioactive material has been deposited in an urban area to establish mid- and long-term countermeasures after a radioactive accident. Therefore, an urban deposition model that can indicate the site-specific characteristics must be developed. Materials and Methods: In this study, the generalized urban deposition velocity and the subsequent variation in radionuclide contamination were estimated based on the characteristics of the Korean urban environment. Furthermore, the application of the obtained generalized deposition velocity in a hypothetical scenario was investigated. Results and Discussion: The generalized deposition velocities of ¹³⁷Cs, ¹⁰⁶Ru, and ¹³¹I for each residence type were obtained using three-dimensional (3D) modeling. For all residence types, the deposition velocities of ¹³¹I are greater than those of ¹⁰⁶Ru and ¹³⁷Cs. In addition, we calculated the generalized deposition velocities for each residential types. Iodine was the most deposited nuclide during initial deposition. However, the concentration of iodine in urban environment drastically decreases owing to its relatively shorter half-life than ¹⁰⁶Ru and ¹³⁷Cs. Furthermore, the amount of radioactive material deposited in nonresidential areas, especially in parks and schools, is more than that deposited in residential areas. Conclusion: In this study, the generalized urban deposition velocities and the subsequent deposition changes were estimated for the Korean urban environment. The 3D modeling was performed for each type of urban residential area, and the average deposition velocity was obtained and applied to a hypothetical accident. Based on the estimated deposition velocities, the decision-making systems can be improved for responding to radioactive contamination in urban areas. Furthermore, this study can be useful to predict the radiological dose in case of large-scale urban contamination and can support decision-making for long-term measurement after nuclear accident.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.5
• /
• pp.5-14
• /
• 2007

The quantity of noxious wastes generated by the growth in industrialization and population in all over the world and its potential hazards in subsurface environments are becoming increasingly significant. The extraction of the contaminant from the soil and movement of the water are restricted due to the low permeability and adsorption characteristics of the reclaimed soils. Incorporated technique with PVDs have been used for dewatering from fine-grained soils for the purpose of ground improvement by means of soil flushing and soil vapor extraction systems. This paper is to evaluate several key parameters that affected to the performance of the PVDs specifically with regard to: well resistance of PVD, zone of influence, and smear effects. In the feasibility of contaminant remediation was evaluated in pilot-scale laboratory experiments. Well resistance is affected on the vertical discharge capacity of the PVDs under the various vacuum pressures. The discharge capacity increases consistently in areal extents with higher applied vacuum up to a limiting vacuum pressure. The head values for each piezometer at different vacuum pressures show that the largest head loss occurs within 14 cm of the PVD. Air flow rates and head losses were measured for the PVD placed in the model test box and the gas permeability of the silty soils was calculated. Increasing the equivalent diameter results in a decrease in the calculated gas permeability. It is concluded that the gas permeability determined over the 1,500 to 2,000 $cm^3/s$ flow rates are the most accurate values which yields gas permeability of about 3.152 Darcy.