• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.10-17
• /
• 2013

In this paper, a new active damping method of LCL filter without capacitor voltage sensors is proposed for 3 phase PWM Inverter. Normally, L filter or LCL filter is used as an output filter of grid connected PWM inverter. An LCL filter has more excellent performance than L filter to reduce harmonic current, so the small inductance value can be used. However, the resonance problem in LCL filter is happen due to the zero impedance by the addition of LC branch. To solve the resonance problem, the various active damping method has been proposed so far. Generally, the virtual resistor active damping methods is required to additional hardware sensors for measurement of capacitor voltage and current. In this paper, the new active damping method is proposed without any capacitor voltage or current sensors. In the proposed method, the resonance component of the capacitor voltage of LCL filter can be observed by a simple MRAS(Model Reference Adaptive System) observer without additional hardware sensors, and this component is suppressed by feedforward compensation. The validity of the proposed method is proven by simulation and experiment on the 3-phase PWM inverter system.

• 전력전자학회논문지
• /
• 제16권6호
• /
• pp.594-601
• /
• 2011

본 논문은 상용의 전원 전압이 불평형 및 왜곡을 갖는 경우, 전원전압 불평형 및 왜곡 보상기능을 갖는 전류제어기를 제안한다. 일반적으로 3상 전원 시스템은 공통 입력 단자 (Point of Common Coupling)에 단상 부하 및 비선형 부하가 3상 부하와 같이 연결될 수 있어, 종종 불평형과 왜곡이 발생한다. 이런 조건하에서 3상 PWM 정류기를 일반적인 전류 제어기로 제어 할 경우, 3상 PWM 정류기 입력 전류가 불평형 및 왜곡을 갖는 문제가 발생한다. 본 논문에서는 간단한 모델 기반 적응 제어 시스템(Model Reference Adaptive System)기법을 이용하여 3상 입력 전압의 불평형 및 왜곡을 관측하고 전향 보상하는 전류 제어기를 제안하며, 모의해석과 실험을 통하여 그 효용성을 입증한다.

• 한국컴퓨터정보학회논문지
• /
• 제9권3호
• /
• pp.115-120
• /
• 2004

SCORM의 데이터 모델을 확장하여 학습자의 학습특성에 따라 학습 컨텐츠를 차별적으로 제공할 수 있는 적응형 학습관리 시스템을 제안하였다. SCORM의 데이터 모델 확장과 학습자의 진단-처방처리 절차를 정립하여 IEEE에서 제시한 표준 학습관리 시스템의 아키텍쳐(LTSA)에 추가시켜 시스템을 설계하였으며, 컨텐츠 메타데이터를 확장하였고. 학습진행 동안에 컨텐츠를 동적으로 순서를 정하게 하는 패키징을 정의하여 이를 기반으로 적응형 학습관리 시스템을 구현하였다. 실험 컨텐츠를 이용해 시스템의 성능을 평가한 결과, 학습자의 특성에 따라 개별적인 학습컨텐츠가 제공되었고, SCORM을 확장하여 적응형 학습관리 시스템을 구현하는 것이 가능함을 보여 주었다.

• Smart Structures and Systems
• /
• 제18권6호
• /
• pp.1251-1267
• /
• 2016

In this paper, Simple Adaptive Control (SAC) is used to enhance the seismic response of nonlinear tall buildings based on acceleration feedback. Semi-active MR dampers are employed as control actuator due to their reliability and well-known dynamic models. Acceleration feedback is used because of availability, cost-efficiency and reliable measurements of acceleration sensors. However, using acceleration feedback in the control loop causes the structure not to apparently meet some requirements of the SAC algorithm. In addition to defining an appropriate SAC reference model and using inherently stable MR dampers, a modification in the original structure of the SAC is proposed in order to improve its adaptability to the situation in which the plant does not satisfy the algorithm's stability requirements. To investigate the performance of the developed control system, a numerical study is conducted on the benchmark 20-story nonlinear building and the responses of the SAC-controlled structure are compared to an $H_2/LQG$ clipped-optimal controller under the effect of different seismic excitations. As indicated by the results, SAC controller effectively reduces the story drifts and hence the seismically-induced damage throughout the structural members despite its simplicity, independence of structural parameters and while using fewer number of dampers in contrast with the $H_2/LQG$ clipped-optimal controller.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.42-45
• /
• 2004

This paper is proposed an adaptive fuzzy controller of induction motor drive. The adaptive fuzzy controller approach for an estimate of the rotor time constant which is used to adjust the estimate of the slip angular speed. An estimate of the rotor time constant was obtained using an model reference adaptive system(MRAS) in a fuzzy control scheme. The rotor time constant was estimated by utilizing the rotor nut estimates. This paper is proposed the theoretical analysis as well as the simulation results to verify the effectiveness of the new method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.720-723
• /
• 2005

Ship motion is a complex controlled process with several hydrodynamic parameters that vary in wide ranges with respect to ship load condition, speed and surrounding conditions (such as wind, current, tide, etc.). Therefore, to effectively control ships in a designed track is always an important task for ship masters. This paper presents an effective adaptive autopilot ships that ensure the optimal accuracy, economy and stability characteristics. The PID control methodology is modified and parameters of a PID controller is designed to satisfy conditions for an optimal objective function that comprised by heading error, resistance and drift during changing course, and loss of surge velocity or fuel consumption. Designing of the controller for course changing process is based on the Model Reference Adaptive System (MRAS) control theory, while as designing of the automatic course keeping process is based on the Self Tuning Regulator (STR) control theory. Simulation (using MATLAB software) in various disturbance conditions shows that in comparison with conventional PID autopilots, the designed autopilot has several notable advantages: higher course turning speed, lower swing of ship bow even in strong waves and winds, high accuracy of course keeping, shorter time of rudder actions smaller times of changing rudder direction.

• 대한전기학회논문지
• /
• 제37권3호
• /
• pp.171-179
• /
• 1988

본 논문은 MRAC방식을 이용하여 비행체 조종장치의 제어기 설께에 관하여 다루었다. 적응제어 시스템의 구성은 NARENDRA와 VALAVANI가 제안한 구조를 토대로 하여 프랜트의 상대차수가 $n^{*}=2$인 경우에 대하여 고찰하였다. 비행체 조종장치는 단일 입.출력을 갖는 제어시스템으로 근사화하였고, 제어입력은 기준모델과 프랜트의 입.출력관계로부터 얻는다. 설계된 제어시스템의 타당성을 검토하기 위하여 프랜트가 애널로그 모델인 경우롸 비행자세를 나타내줄 수 있는 비행운동테이블을 포함하는 각각의 경우에 대하여 시뮬레이션하였고, 그 결과 검토하였다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권6호
• /
• pp.71-77
• /
• 1995

This paper deals with design method of learning fuzzy controller for control of an unknown nonlinear plant using the self-tuning algorithm of fuzzy inference rules. In this method the fuzzy identification model obtained that the joined identification model of nonlinear part and linear identification model of linear part by fuzzy inference systems. This fuzzy identification model ordered self-tuning by Decent method so as to be servile to nonlinear plant. A the end, designed learning fuzzy controller of fuzzy identification model have learning structure to model reference adaptive system. The simulation results show that th suggested identification and learning control schemes are practically feasible and effective.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1624-1627
• /
• 2005

We proposed a design technique for auto-landing guidance and control system. This technique utilizes linear controller and neural network. Main features of this technique is to use conventional linear controller and compensate for the error coming from the model uncertainties and/or reference model mismatch. In this study, the multi-perceptron neural network with single hidden layer is adopted to compensate for the errors. Glide-slope capture logic for auto-landing guidance and control system is designed in this technique. From the simulation results, it is observed that the responses of velocity and pitch angle to commands are fairly good, which are directly related to control inputs of throttle and elevator, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.830-831
• /
• 2011

The paper makes an investigation on a speed and stator flux linkage estimator for permanent magnet synchronous motor (PMSM) sensorless drives using the technology of model reference adaptive system (MRAS). The designed estimator including two models and two adaptive estimating laws is proved to be stable by the Popov hyper-stability theory. The speed, the stator flux linkage and the resistance are estimated accurately by the proposed estimator while overcoming the shortcoming of the traditional one. The experiment results demonstrate its effectiveness.