• Journal of the Korea Society of Computer and Information
• /
• v.26 no.10
• /
• pp.1-7
• /
• 2021

Recently, since most of the research on correcting speech recognition errors is based on English, there is not enough research on Korean speech recognition. Compared to English speech recognition, however, Korean speech recognition has many errors due to the linguistic characteristics of Korean language, such as Korean Fortis and Korean Liaison, thus research on Korean speech recognition is needed. Furthermore, earlier works primarily focused on editorial distance algorithms and syllable restoration rules, making it difficult to correct the error types of Korean Fortis and Korean Liaison. In this paper, we propose a context-sensitive post-processing model of speech recognition using a LSTM-based sequence-to-sequence model and Bahdanau attention mechanism to correct Korean speech recognition errors caused by the pronunciation. Experiments showed that by using the model, the speech recognition performance was improved from 64% to 77% for Fortis, 74% to 90% for Liaison, and from 69% to 84% for average recognition than before. Based on the results, it seems possible to apply the proposed model to real-world applications based on speech recognition.

• Journal of the Korea Society for Simulation
• /
• v.19 no.1
• /
• pp.153-160
• /
• 2010

Most part of errors in software development process are included during the stage of requirements definition and design. And correction or elimination of errors from those stages requires much more efforts and costs than those from the later part of software development process. However, despite of the importance of the validation of requirement definition and design stages, several kinds of problem have made it hard to be done successfully. Therefore, in this paper, we introduce a novel validation process for the preliminary design stage. The validation process is based on simulations of model and it can be used to validate requirements and model simultaneously. Models in the validation process will take only the behavior of software and be built on Ptolemy framework. The usability of our validation process is confirmed with a case study over DNS system environment. And the result of simulation shows well-known errors or vulnerabilities can be found with simulations of model which has the behavior of software. This means our validation process can be used as a process to validate requirements and models during the early stage of software development process.

• Journal of Biomedical Engineering Research
• /
• v.30 no.1
• /
• pp.10-17
• /
• 2009

Accurate electroencephalography (EEG) forward calculation is of importance for the accurate estimation of neuronal electrical sources. Conventional studies concerning the EEG forward problems have investigated various factors influencing the forward solution accuracy, e.g. tissue conductivity values in head compartments, anisotropic conductivity distribution of a head model, tessellation patterns of boundary element models, the number of elements used for boundary/finite element method (BEM/FEM), and so on. In the present paper, we investigated the influence of modeling errors in the boundary element volume conductor models upon the accuracy of the EEG forward solutions. From our simulation results, we could confirm that accurate construction of boundary element models is one of the key factors in obtaining accurate EEG forward solutions from BEM. Among three boundaries (scalp, outer skull, and inner skull boundary), the solution errors originated from the modeling error in the scalp boundary were most significant. We found that the nonuniform error distribution on the scalp surface is closely related to the electrode configuration and the error distributions on the outer and inner skull boundaries have statistically meaningful similarity to the curvature distributions of the boundary surfaces. Our simulation results also demonstrated that the accumulation of small modeling errors could lead to considerable errors in the EEG source localization. It is expected that our finding can be a useful reference in generating boundary element head models.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.6
• /
• pp.83-90
• /
• 2003

This paper presents an underwater hybrid navigation system for a semi-autonomous underwater vehicle (SAUV). The navigation system consists of an inertial measurement unit (IMU), and a Doppler velocity log (DVL), accompanied by a magnetic compass. The errors of inertial measurement units increase with time, due to the bias errors of gyros and accelerometers. A navigational system model is derived, to include the scale effect and bias errors of the DVL, of which the state equation composed of the navigation states and sensor parameters is 20. The conventional extended Kalman filter was used to propagate the error covariance, update the measurement errors, and correct the state equation when the measurements are available. Simulation was performed with the 6-d.o,f equations of motion of SAUV, using a lawn-mowing survey mode. The hybrid underwater navigation system shows good tracking performance, by updating the error covariance and correcting the system's states with the measurement errors from a DVL, a magnetic compass, and a depth sensor. The error of the estimated position still slowly drifts in the horizontal plane, about 3.5m for 500 seconds, which could be eliminated with the help of additional USBL information.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.623-629
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function(FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. Since the response signals generated by the impact hammer are transient and have damping, they are undoubtedly non-periodic. It is inevitable that the signals be acquired for limited recording time, which causes the finite record length error and the leakage error. In this paper, the errors in the frequency response function of multi degree of freedom system are formulated theoretically. And the method to remove these errors is also suggested. This method is based on the optimization technique. A numerical example of 3-dof model shows the validity of the proposed method.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.10
• /
• pp.792-798
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function (FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. Since the response signals generated by the impact hammer are transient and have damping, they are undoubtedly non-periodic. It is inevitable that the signals be acquired for limited recording time, which causes the finite record length error and the leakage error. In this paper, the errors in the frequency response function of multi degree of freedom system are formulated theoretically. And the method to remove these errors is also suggested. This method is based on the optimization technique. A numerical example of 3-dof model shows the validity of the proposed method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.295-298
• /
• 2000

In this research, a novel sampling strategy for a CMM to inspect freeform surfaces is proposed. Unlike primitive surfaces, it is not easy to determine the number of sampling points and their locations for inspecting freeform surfaces. Since a CMM operates with slower speed in measurement than optical measuring devices, it is important to optimize the number and the locations of sampling points in the inspection process. When a complete inspection of a surface is required, it becomes more critical. Among various factors to cause shape errors of a final product, curvature characteristic is essential due to its effect such as stair-step errors in rapid prototyping and interpolation errors in NC tool paths generation. Shape errors are defined in terms of the average and standard deviation of differences between an original model and a produced part. Proposed algorithms determine the locations of sampling points by analyzing curvature distribution of a given surface. Based on the curvature distribution, a surface area is divided into several sub-areas. In each sub-area, sampling points are located as further as possible. The optimal number of sub-areas. In each sub-area, sampling points are located as further as possible. The optimal number os sub-areas is determined by estimating the average of curvatures. Finally, the proposed method is applied to several surfaces that have shape errors for verification.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.41 no.3
• /
• pp.1-21
• /
• 2016

The Markowitz portfolio selection model uses estimators to deduce input parameters. However, the estimation errors of input parameters negatively influence the performance of portfolios. Therefore, this model cannot be reliably applied to real-world investments. To overcome this problem, we suggest an algorithm that can exclude stocks with large estimation error from the portfolio by applying a tracking signal to the Markowitz portfolio selection model. By calculating the tracking signal of each stock, we can monitor whether unexpected departures occur on the outcomes of the forecasts on rate of returns. Thereafter, unreliable stocks are removed. By using this approach, portfolios can comprise relatively reliable stocks that have comparatively small estimation errors. To evaluate the performance of the proposed approach, a 10-year investment experiment was conducted using historical stock returns data from 6 different stock markets around the world. Performance was assessed and compared by the Markowitz portfolio selection model with additional constraints and other benchmarks such as minimum variance portfolio and the index of each stock market. Results showed that a portfolio using the proposed approach exhibited a better Sharpe ratio and rate of return than other benchmarks.

• Journal of Mechanical Science and Technology
• /
• v.20 no.5
• /
• pp.652-657
• /
• 2006

Although many methods about the control of irregular external noise have been introduced and implemented, it is still necessary to design a controller that will be more effective and efficient methods to exclude for various noises. Accumulation of errors due to model tracking, internal noises (thermal noise, shot noise and 1/f noise) that come from elements such as resistor, diode and transistor etc. in the circuit system and numerical errors due to digital process often destabilize the system and reduce the system performance. New stochastic controller is adopted to remove those noises using conventional controller simultaneously. Design method of a model tracking dual controller is proposed to improve the stability of system while removing external and internal noises. In the study, design process of the model tracking dual stochastic controller is introduced that improves system performance and guarantees robustness under irregular internal noises which can be created internally. The model tracking dual stochastic controller utilizing F-P-K stochastic control technique developed earlier is implemented to reveal its performance via simulation.

• The Korean Journal of Applied Statistics
• /
• v.29 no.1
• /
• pp.75-83
• /
• 2016

We propose methodology to analyze the dynamic mechanisms of financial market contagion under market integration using a biological contagion analytical approach. We employ U-statistic to measure market integration, and a dynamic model based on an error correction mechanism (single equation error correction model) and latent factor model to examine market contagion. We also use quantile regression and Wald-Wolfowitz runs test to test market contagion. This methodology is designed to effectively handle heteroscedasticity and correlated errors. Our simulation results show that the single equation error correction model fits well with the linear regression model with a stationary predictor and correlated errors.