• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1191-1198
• /
• 2001

MMIC low noise amplifiers for millimeter-wave application using 0.15 $\mu$m pHEMT have been presented in this paper. The design emphasis is on active device model and EM simulation. The deficiency of conventional device models is identified. A distributed device model has been adapted to circumvent the scaling problems and, thus, to predict small signal and noise parameters accurately. Two single-ended low noise amplifier are designed using distributed active device model for Q-band(40 ∼ 44 GHz) and V-band(58 ∼65 GHz) application. The Q-band amplifier achieved a average noise figure of 2.2 dB with 18.3 dB average gain. The V-band amplifier achieved a average noise figure of 2.9 dB with 14.7 dB average gain. The design technique and model employed provides good agreement between measured and predicted results. Compared with the published data, this work also represents state-of-the-art performance in terms of gain and noise figure.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.160-168
• /
• 1999

This paper describes one method of reverse engineering that machines a free form shape without descriptive model. A portable five-axes 3D CMM was used to digitize point data from physical model. After approximation by rational B-spline curve from digitized point data of a geometric shape, a surface was constructed by the skinning method of the cross-sectional design technique. Since a surface patch was segmented by fifteen part, surface merging was also implemented to assure the surface boundary continuity. Finally, composite surface was transferred to commercial CAD/CAM system through IFES translation in order to machine the modeled geometric shape.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.3
• /
• pp.377-385
• /
• 2012

The Automatic Dependent Surveillance Broadcast (ADS-B) system is a key component of CNS/ATM recommended by the International Civil Aviation Organization (ICAO) as the next generation air traffic control system. ADS-B broadcasts identification, positional data, and operation information of an aircraft to other aircraft, ground vehicles and ground stations in the nearby region. This paper explores the ADS-B based trajectory prediction and the conflict detection algorithm. The multiple-model based trajectory prediction algorithm leads accurate predicted conflict probability at a future forecast time. We propose an efficient and accurate algorithm to calculate conflict probability based on approximation of the conflict zone by a set of blocks. The performance of proposed algorithms is demonstrated by a numerical simulation of two aircraft encounter scenarios.

• Kyungpook Mathematical Journal
• /
• v.57 no.3
• /
• pp.457-471
• /
• 2017

A necessary and sufficient condition for the product AB of a selfadjoint operator A and a bounded selfadjoint operator B to be normal is given. Various properties of the factors of the unitary polar decompositions of A and B are obtained in the case when the product AB is normal. A block operator model for pairs (A, B) of selfadjoint operators such that B is bounded and AB is normal is established. The case when both operators A and B are bounded is discussed. In addition, the example due to Rehder is reexamined from this point of view.

• KIEAE Journal
• /
• v.13 no.3
• /
• pp.91-96
• /
• 2013

The purpose of this study was to analyze the annual energy demand including heating, cooling and lighting according to kind of windows with transparent thin-film a-Si Building Integrated Photovoltaic(a-Si BIPV) for office building. The analysis results of the annual energy demand indicated that the a-si BIPV window was reduced by 8.4% than the clear gazing window. The base model A was combinate with a-Si BIPV window area of 67% and clear window area of 33% among the total exterior area. The model B is to be applied with low-e clear glass instead of clear glass of the base model A. The model B was reduced to annual energy demand of 1% more than the model A. Therefore, By using a-si BIPV solar module, the cooling energy demand can be reduced by 53%(3.4MWh) and the heating energy demand can be increase by 58%(2.4MWh) than clear glazing window in office building. Also, Model C applied to the high efficient lighting device to the model B was reduced to annual energy demand of 14.4% more than the Model D applied to the high efficient lighting device to the model A. The Model E applied with daylight dimming control system to the Model C was reduced to annual energy demand of 5.9% more than Model C.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.143-150
• /
• 2011

Energy loss at manholes, often exceeding friction loss of pipes under surcharged flow, is considered as one of the major causes of inundation in urban area. Therefore, it is important to analyze the head losses at manholes, especially in case of surcharged flow. The stream characteristics were analyzed and head loss coefficients were estimated by using the computational fluid dynamics(CFD) model, FLUENT 6.3, at surcharged square manhole in this study. The CFD model was carefully assessed by comparing simulated results with the experimental ones. The study results indicate that there was good agreement between simulation model and experiment. The CFD model was proved to be capable of estimating the head loss coefficients at surcharged manholes. The head loss coefficients with variation of the ratio of manhole width(B) to inflow pipe diameter(d) and variation of the drop height at surcharged square manhole with a straight-path through were calculated using FLUENT 6.3. As the ratio of B/d increases, head loss coefficient increases. The depth and head loss coefficient at manhole were gradually increased when the drop height was more than 5cm. Therefore, the CFD model(Fluent 6.3) might be used as a tool to simulate the water depth, energy losses, and velocity distribution at surcharged square manhole.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.1006-1015
• /
• 1997

Whole soybean meju was fermented with four Bacillus strains for 45 hr in its model system. The pH range of the product was $7.98{\sim}8.68$, the contents of amino nitrogen and ammoniacal nitrogen were $286{\sim}439\;mg%,\;0.11{\sim}0.23%$, respectively and that of reducing sugar ranged $0.65{\sim}2.24%$. During fermentation, the enzyme activities increased up to $30{\sim}40\;hr$ of fermentation and slightly decreased after 45 hr. Stachyose was special sugar components for B. licheniformis and raffinose was for B. natto. The components of the organic acid showed distinctive patterns among four products and the patterns of amino acids and fatty acids were almost similar to those of other reports. The main and common odor concentrates of meju were pyrazine components, 3-methyl-1-butanol, acetic acid and ethanol. Chunggukjang, mixed with B. natto and B. licheniformis showed more acceptabilities than other combinations. Soybean paste, mixed with B. megaterium and B. subtilis, soysauce, mixed with B. megaterium and A. oryzae showed excellent acceptability, respectively.

• The KIPS Transactions:PartB
• /
• v.16B no.1
• /
• pp.47-54
• /
• 2009

Automatic object recognition in 3D measuring data is of great interest in many application fields e.g. computer vision, reverse engineering and digital factory. In this paper we present a software tool for a fully automatic object detection and parameter estimation in unordered and noisy point clouds with a large number of data points. The software consists of three interactive modules each for model selection, point segmentation and model fitting, in which the orthogonal distance fitting (ODF) plays an important role. The ODF algorithms estimate model parameters by minimizing the square sum of the shortest distances between model feature and measurement points. The local quadric surface fitted through ODF to a randomly touched small initial patch of the point cloud provides the necessary initial information for the overall procedures of model selection, point segmentation and model fitting. The performance of the presented software tool will be demonstrated by applying to point clouds.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.3 no.1
• /
• pp.41-56
• /
• 1999

Since UV-B radiation measuring networks have not been established, numerical models which calculate the flux from other readily available meteorological measurements may play an important role. That is, such a problem can be solved by using parameterization models such as two stream approximation, the delta-Eddington method, doubling method, and discrete ordinate method. However, most UV-B radiative transfer models have not been validated with measurements, because such models are not intended as practical computational schemes for providing surface estimates of UV-B radiation. The main concern so far has been to demonstrate model sensitivity for cloudless skies. In particular, few have been concerned with real cloud information. Clouds and aerosols have generally been incorporated as constituents of particular atmospheric layers with specified optical depths and scattering properties. The parameterization model presented here is a combination of a detailed radiative transfer algorithm for a coludless sky radiative process and a more approximate scheme to handle cloud effects. The model input data requires a daily measurement of the total ozone amount plus a daily record of the amount and type of cloud in the atmosphere. Measurements for an examination of the models at the Department of Atmospheric Sciences, Pusan National University have been takenfrom February, 1995. These models can be used to calculate present and future fluxes where measurements have not been taken, and construct climatologies for the period before ozone depletion began.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2002.11b
• /
• pp.15-15
• /
• 2002

In higher dicotyledonous plants, the floral organs are arranged in four different whorls, containing sepals, petals, stamens and carpels. petals, stamens and carpels. The specification of floral organ identity is explained by the ABC model (Weigel and Meyerowitz 1994). Expression of an A-function gene specifies sepal formation in whorl 1. the combination of A-and B-function genes specifies the formation of petals in whorl 2, B-and C-function genes spesify stamen formation in whorl 3, and expression of the C-function alone determines the formation of carpels in whorl 4. A-. B-, C-function genes have been isolated from many plant species and most of them belong to the family of MADS-box genes encoding transcription factor. In contrast to the flower of higher dicots, the perianths of genseng plants have three whorls of almost identical petaloid organs. van Tunen et al. (1993) proposed a modified ABC model, exemplified with tulip. In this model, B-function genes are expressed in whorl 1 as well as whorl 2 and 3, theefore the organs of whorl 1 and whorl 2 have the same petaloid structure. They proposed this model with the molphological data of wild type and mutant flowers of tulip, however, there are no molecular data.(중략)