• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8A
• /
• pp.790-797
• /
• 2006

IEEE 802.16e specifies two different power saving modes(PSM). One is sleep mode and the other is idle mode. These modes are different in that whether a mobile node maintains its state information with the serving base station or not. This difference results in different efficiency in consuming battery power of a mobile terminal. Therefore, it becomes important to analyze the performance of each power saving mode considering the parameters affecting the power consumption. In this paper, we propose a performance modeling framework of sleep mode and idle mode in terms of power saving efficiency. The analytical results are verified by computer simulations that idle mode is superior to sleep mode in power consumption of mobile node.

• Journal of Biomedical Engineering Research
• /
• v.30 no.3
• /
• pp.185-190
• /
• 2009

Biomedical mobile devices for ubiquitous healthcare consist of biomedical sensors and communication terminal. They have two types of configuration. One is the sensor-network type device using wired or wireless communication with intelligent sensors to acquire biomedical data. The other is the sensor embedded type device, where the data can be acquired directly by itself. There are many examples of sensor network type, such as, fall detection sensor, blood glucose sensor, and ECG sensors networked with commercial PDA phone and commercial phone terminal for ubiquitous healthcare. On the other hand, sensor embedded type mounts blood glucose sensor, accelerometer, and etc. on commercial phone. However, to enable true ubiquitous healthcare, motion sensing is essential, because users go around anywhere and their signals should be measured and monitored, when they are affected by the motion. Therefore, in this paper, two biomedical mobile devices with motion monitoring function were addressed. One is sensor-network type with motion monitoring function, which uses Zigbee communication to measure the ECG, PPG and acceleration. The other is sensor-embedded type with motion monitoring function, which also can measure the data and uses the built-in cellular phone network modem for remote connection. These devices are expected to be useful for ubiquitous healthcare in coming aged society in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3680-3686
• /
• 2012

This research suggests a monitoring method to support QoS of mobile multimedia services effectively based on information gathering. It means a method in which a subscriber's terminal collects information about its current condition and its surrounding base stations, and a base station, through the data collected by monitoring inner or adjacent base station, shares related data and converges, controlling QoS on its own. In other words, as context information of mobile terminal and base station changes, set-up of related functions and QoS mapping is adapted; each function fits into the change, exchanges the process of reorganization, and interacts; these actions go toward to satisfy service continuity.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.67-71
• /
• 2019

In this paper, we derive a reference error probability performance in the environment where mobile satellite terminal is operated. When the satellite terminal moves, shadowing occurs due to the surrounding obstacles and the BER is lowered. We use the Lutz model simulating the environment in which mobile satellite terminals operate The Lutz model combines the Rician distribution with the Suzuki model. The error probability is derived from the numerical analysis of two distribution functions. The simulated results using the measured results in the Korean Peninsula forest area were similar to the BER results obtained using the Lutz model. Intuitively, the approximated results are similar to the measured results. Numerically, the BER error is about 3e-4 or less at an SNR of 30dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.772-779
• /
• 2015

In this paper,a reconfigurable multi-band mobile antenna with switching line for LTE band 13, GSM, K-PCS, WCDMA band. The proposed antenna is planar strip line design and composed of stub shorted to the ground plane and two switching line for proposed band operation. To obtain the optimized parameters, we used the simulator, Using the obtained parameters is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -6 dB impedance bandwidth requirement while simultaneously covering when the state of sw1 and sw2 on for LTE band 13, the state of sw1 off and sw2 on for GSM, K-PCS, the state of sw1 off and sw2 off for WCDMA. Respectively and characteristics of gain and radiation patterns are determined for a reconfigurable multi-band mobile terminal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2720-2728
• /
• 2012

Recently flexible mobile terminals which can freely change the shape of their device are coming out with the development of the flexible display, high capacity memory and system integration technology. The display and the antenna configuration of the future terminals will be altered according to the QoS (quality of service) and the communication environment of users. In particular, we present the new emergence of a multimedia language for human and system to communicate over subjective concepts, intention of users. The intension of users is expressed by changing the shape of their mobile terminal. In addition, antenna configuration is also related to shape of terminal and QoS of users. Therefore, we set up a specific usage scenarios for future mobile terminals and propose an adaptive MIMO (multiple-input multiple-output) schemes that can maximize channel capacity and fit to QoS of users simultaneously.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4B
• /
• pp.183-190
• /
• 2007

The cdma2000 mobile network covers a wide area but its characteristics are high cost and low bandwidth. On the other hand, WLAN covers a small area like a hot spot area but its characteristics are large bandwidth and low cost. Thus we can provide efficient services when we employ an integration network between WLAN and cdma2000 mobile networks. In this paper, we propose an integration scheme between WLAN and cdma2000 mobile networks. In addition, we design and implement the dual mode terminal which receives seamless data services in the integrated network. The proposed dual mode terminal manages connections by monitoring the signal strength of WLAN and selecting a proper network. We validate the functions through the implementation of VOD and show the effectiveness through the performance measurement.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.6
• /
• pp.57-66
• /
• 2012

LTE-Advanced network will form the high-speed IP backbone in collaboration with heterogeneous radio access networks for dynamic optimized resource utilization. In order to implement more innovative and attractive services such as U-Cloud streaming, LBS and mobile smart TV, a mobile terminal needs to support multiple sessions simultaneously. Efficient resource allocation schemes are necessary to maintain QoS of multiple sessions because service continuity may be defected by delay and information loss during handover. This paper proposes a resource allocation scheme to accommodate multiple sessions in a mobile terminal on handover period based on session priority mechanism. Simulation is focused on the forced termination probability of handover sessions. Simulation results show that our proposed method provides a better performance than the conventional method.

• The KIPS Transactions:PartD
• /
• v.11D no.2
• /
• pp.485-494
• /
• 2004

Recently, the wireless internet terminals like mobile phones or PDAs prevail in the management of customers. With such terminals, businessmen can get business data and information of customers in real time, in connection with mobile group wares. By the wireless terminals, customers can conveniently get information of goods, search purchase sites, and give orders and do settlement. This paper aims to present the safe data integrity modules of the wireless internet terminal, for service providing correct real-time promotion information, by using users' disposition, situation, Purchase information. This study aims to suggest an implementation methodology of security module for data integrity of mobile internet terminal. This is based on the WTLS of WAP Protocol. This security module is expected to achieve central role in conversion of wireless internet environment and emphasis of encryption technology and safe and calculable wireless communication environment construction

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.4
• /
• pp.83-94
• /
• 2010

Mobile network infrastructure is being completed with the development of hardware and software for mobile devices. Network in mobile devices has evolved for telematics that is expanded much more than its existing concept. Telematics is compound word that is formed from the words "telecommunication" and "informatics". It means that telematics performs control and monitoring service with using mobile device resources. These services provide their services for users' requests through wired or wireless network from mobile devices and server that offers contents and network service collects management information of mobile devices. Map service is one of the preferred services for many telematics users. However, mobile map service has a limit between traffic and information sharing. Therefore it is very important to supply their information for both service provider and terminal user. In this paper, we design a new interactive sketch map using routes and information on the space to be applied effectively, and provide an extended document format that is defined to an extensible and dynamic clustering scheme to have portability map service for mobile device.