• 도시과학
• /
• 제11권2호
• /
• pp.45-54
• /
• 2022

Recently, regulations on automobile exhaust gas emission are being strengthened. Accordingly, automobile exhaust gas emissions are expected to decrease and continue to decrease. On the other hand, many countries do not yet consider the emission of non-exhaust air pollutants from automobiles as important. Automobile non-exhaust substances are classified into three categories: tire dust emissions, brake wear emissions, and road scattering dust. In particular, in the case of tire dust, research results exist that pollutant emissions increase as the weight of a vehicle increases. Since the weight of trucks varies according to the load and the load along the axles is also different, it can be expected that the emission of PM10 from the tire dust will be different depending on the loading method. Therefore, this study was conducted on the amount of PM10 generated in tire dust considering the axle load of the truck according to the loading method. However, it was confirmed that the total amount of PM10 was less than that all loads are loaded in the front or rear when the load was evenly distributed in the front and rear of the cargo compartment. In particular, if the load is distributed evenly in the front and back of the cargo compartment and the load in the front part is divided into 2 to 6 and loaded, as the number of divided loading increases the amount of PM10 generated decreases. And when the load is divided into 6 pieces, the total amount of PM10 generated is 0.3952g, the minimum value. If the load is divided into 6 or more and loaded evenly, the total PM10 generated continuously increases and converges to about 0.3964g.

• 대한교통학회지
• /
• 제34권2호
• /
• pp.107-122
• /
• 2016

이 연구는 교통수요모형에 기반한 자동차 배출량 산정 시 존내 배출량이 누락되는 문제를 보완하기 위해, 교통수요모형과 결합하여 활용될 수 있는 존내 배출량 산정 모형을 정립하는데 목적이 있다. 특히 "도시-교통의 상호작용에 기안하여, 도시공간구조는 접근도에 영향을 미치고, 이는 사람들의 통행행태에 영향을 미친다."는 이론에 근거하여, 본 연구는 도시 도로의 구조적인 특성을 정량화할 수 있는 공간 구문론(Space Syntax) 이론 등을 활용하여 존내 통행거리, 존내 통행량, 존내 평균 통행속도, 그리고 이들을 조합한 존내 배출량 추정 모형을 구축하였다. 연구 결과, 도시 공간 구조는 존내 배출 특성에도 영향을 미치는 것으로 나타났으며, 특히 압축도시이고, 대지 면적이 좁고, 난개발 지수가 낮고, 격자형 도시일수록, 존내 자동차 배출량은 적게 배출되는 것으로 나타났다. 지역의 공간적 특성을 반영하여 구축된 본 연구 모형은 기존 모형에 비해 약 44-46% 높은 설명력을 보였다. 이를 수원시 자전거 도로 개선사업에 적용하여 배출 저감량을 산정한 결과, 존간 배출 저감량만 고려한 기존 결과와 비교해 약 2배 높은 배출 저감량이 산정되었다. 본 연구결과는 국가 배출량 산정에의 활용 및 다양한 교통-환경 정책의 효과 평가에도 유용하게 활용될 수 있을 것으로 기대된다.

• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.88-97
• /
• 2012

To measure the traffic pollutants with high temporal and spatial resolution under real conditions, a mobile emission laboratory (MEL) was designed. The equipment of the mini-van provides gas phase measurements of CO, NOx, CO2 and THC (Total hydrocarbon), and number density & size distribution measurements of fine and ultra-fine particles by a fast mobility particle sizer (FMPS) and a condensation particle counter (CPC). The inlet sampling port above the bumper enables the chasing of different type of vehicles. This paper introduces the technical details of the MEL and presents data from the experiment in which a MEL chases a city bus fuelled by diesel, DME and Bio-diesel. The dilution ratio was calculated by the ratio of ambient NOx and tail-pipe NOx. Most particles from the bus fuelled by diesel were counted under 300 nm and the peak concentration of the particles was located between 30 and 60 nm. However, most particles in the exhaust of the bus fuelled by DME were nano-particles (diameter: less than 50 nm). The bus fuelled by Bio-diesel shows less particle emissions compare to diesel bus due to the presence of the oxygen in the fuel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.305-308
• /
• 2006

Advanced mobile communication devices require a bright, high information content display in a small, light-weight, low power consumption package. For portable applications flexible (or conformable) and rugged displays will be the future. In this paper we outline our progress towards developing such a low power consumption active-matrix flexible OLED $(FOLED^{TM})$ display. We demonstrate full color 100 ppi QVGA active matrix OLED displays on flexible stainless steel substrates. Our work in this area is focused on integrating three critical enabling technologies. The first technology component is based on UDC's high efficiency long-lived phosphorescent OLED $(PHOLED^{TM})$ device technology, which has now been commercially demonstrated as meeting the low power consumption performance requirements for mobile display applications. Secondly, is the development of flexible active-matrix backplanes, and for this our team are employing PARC's Excimer Laser Annealed (ELA) poly-Si TFTs formed on metal foil substrates as this approach represents an attractive alternative to fabricating poly-Si TFTs on plastic for the realization of first generation flexible active matrix OLED displays. Unlike most plastics, metal foil substrates can withstand a large thermal load and do not require a moisture and oxygen permeation barrier. Thirdly, the key to reliable operation is to ensure that the organic materials are fully encapsulated in a package designed for repetitive flexing, and in this device we employ a multilayer thin film Barix encapsulation technology in collaboration with Vitex systems. Drive electronics and mechanical packaging are provided by L3 Displays.

• 대한교통학회지
• /
• 제35권1호
• /
• pp.37-49
• /
• 2017

본 연구에서는 도로이동오염원을 대상으로 추진하는 교통환경정책의 대기질 개선효과 분석 방법론을 제시하였으며, 해당 방법론은 정책 추진에 따른 도로이동오염원의 통행량과 대기오염물질 배출량 변화, 대기오염물질의 공간적 확산과 이로 인한 노출인구의 건강영향을 순차적으로 고려한다. 특히 도로이동오염원의 통행량 변화는 정책 효과와 직접적인 연관이 있기 때문에 대기질 개선효과 분석시 반드시 고려되어야 하며, 본 연구에서는 교통수요모형 기반의 상향식 방법을 적용하여 기존 하향식 방법 대비 정책 추진에 따른 통행자의 통행행태 변화를 상세하게 반영하고자 하였다. 정책 시나리오 분석을 통하여 본 연구에서 제시한 분석 방법론의 활용가능성을 검토하였으며, 통행자의 통행행태 변화가 예상되는 정책의 대기질 개선효과 분석은 본 연구의 분석 방법론 적용이 필요한 것으로 판단된다.

• 한국입자에어로졸학회지
• /
• 제7권1호
• /
• pp.21-30
• /
• 2011

The spatial distributions of air pollutants, in particular, ultrafine particles near traffic congestion roads at urban areas need to reduce human exposure levels for protecting public health. In this study, the number concentrations of ultrafine particles larger than 5 nm were measured every second during driving on the major roads of Nowon-gu, Seoul for 1.6 h using a mobile emission laboratory on October 5, 2010. The ultrafine particle number concentrations ranged from 7,009 to $265,600particles/cm^3$ with an average of $55,570particles/cm^3$, and these levels were comparable to concentrations of ultrafine particles larger than 3 or 7 nm on the arterial roads at urban areas in Los Angeles, USA and Zurich, Switzerland. It was frequently observed that the ultrafine particle number increased rapidly when vehicle speed was accelerated and it decreased sharply when vehicle speed was decelerated. The high peak events of ultrafine particle concentration larger than $200,000particles/cm^3$ were observed seven times during the measurement period. From the three repeated measurements during the short period of 50 min, it was concluded that the ultrafine particle number concentration on the road was significantly time-dependent. This on-road measurement approach can be utilized to manage vehicle-related air pollution in urban.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권9호
• /
• pp.2073-2085
• /
• 2012

Recently, the International Telecommunication Union allocated the 470-862 MHz band to the digital broadcasting (DB) service. Moreover, the 790-862 MHz sub-band will be allocated to the next-generation mobile system, known as the International Mobile Telecommunication - Advanced (IMT-A), and to the DB on a co-primary basis in the year 2015. Currently, two candidate technologies are available to represent the IMT-A system; the Mobile WiMAX and Long Term Evolution - Advanced (LTE-A). One of the main criteria of the IMT-A candidate is to not cause additional interference to the primary service (i.e., DB). In this paper, we address the spectrum sharing issue between the IMT-A candidates and the DB service. More precisely, we investigate the interference effect between the DB service and the mobile network, which could be either LTE-A or WiMAX. Our study proposes a spectrum sharing model to take into account the impact of interference and evaluates the spectrum sharing requirements such as frequency separation and separation distance. This model considers three spectrum sharing scenarios: co-channel, zero guard band, and adjacent channel. A statistical analysis is performed, by considering the interferer spectrum emission mask and victim receiver blocking techniques. The interference-to-noise ratio is used as an essential spectrum sharing criterion between the systems. The model considers the random distribution of the users, antenna heights, and the bandwidth effect as well as the deployment environment in order to achieve spectrum sharing. The results show that LTE-A is preferable to WiMAX in terms of having less interference impact on DB; this can eventually allow the operation of both services without performance degradation and thus will lead to efficient utilization of the radio spectrum.

• Asian Journal of Atmospheric Environment
• /
• 제2권1호
• /
• pp.34-46
• /
• 2008

Emissions inputs for use in air quality modeling of Korea were generated with the emissions inventory data from the National Institute of Environmental Research (NIER), maintained under the Clean Air Policy Support System (CAPSS) database. Source Classification Codes (SCC) in the Korea emissions inventory were adapted to use with the U.S. EPA's Sparse Matrix Operator Kernel Emissions (SMOKE) by finding the best-matching SMOKE default SCCs for the chemical speciation and temporal allocation. A set of 19 surrogate spatial allocation factors for South Korea were developed utilizing the Multi-scale Integrated Modeling System (MIMS) Spatial Allocator and Korean GIS databases. The mobile and area source emissions data, after temporal allocation, show typical sinusoidal diurnal variations with high peaks during daytime, while point source emissions show weak diurnal variations. The model-ready emissions are speciated for the carbon bond version 4 (CB-4) chemical mechanism. Volatile organic carbon (VOC) emissions from painting related industries in area source category significantly contribute to TOL (Toluene) and XYL (Xylene) emissions. ETH (Ethylene) emissions are largely contributed from point industrial incineration facilities and various mobile sources. On the other hand, a large portion of OLE (Olefin) emissions are speciated from mobile sources in addition to those contributed by the polypropylene industry in point source. It was found that FORM (Formaldehyde) is mostly emitted from petroleum industry and heavy duty diesel vehicles. Chemical speciation of PM2.5 emissions shows that PEC (primary fine elemental carbon) and POA (primary fine organic aerosol) are the most abundant species from diesel and gasoline vehicles. To reduce uncertainties in processing the Korea emission inventory due to the mapping of Korean SCCs to those of U.S., it would be practical to develop and use domestic source profiles for the top 10 SCCs for area and point sources and top 5 SCCs for on-road mobile sources when VOC emissions from the sources are more than 90% of the total.

• 대한교통학회지
• /
• 제33권5호
• /
• pp.449-460
• /
• 2015

현재 교통수요모형 기반의 자동차 배출량 추정 모형에서 교통 활동도 자료는 세부적으로 고려되는 반면, 배출계수는 평균적인 값만 반영되고 있기 때문에 배출량 산정 결과의 정확도를 저하시키는 문제가 있다. 본 연구는 도로유형 및 주행시간대와 무관하게 동일한 배출계수가 적용되는 부분을 개선하기 위해, 도로유형과 주행시간대별 연료소모량 차이에 대한 실증적 분석을 기반으로 각 유형별 배출계수의 보정 지표 제시를 목적으로 한다. 이를 위해, '이동식 차량활동도 모니터링 장비(Portable Activity Monitoring System: PAMS)'를 이용해 도로유형 주행시간대별 실 주행 자료를 수집하였고, 각 유형별 연료소모량을 추정하여 이를 비교하였다. 연구 결과 평균 주행속도가 22.5km/h 일 경우, 도로 유형별 주행차량의 가감속도 변화 등의 차이에 따라 국도에서의 연료소모량(95g/km)은 자동차 전용도로에서(81g/km)보다 약 17.3% 높은 것으로 분석되었고, 첨두시간대의 평균 연료소모량(86.73g/km)은 비첨두시간대(82.84g/km)보다 약 4.7% 높은 것으로 분석되었다. 각 유형별 연료소모량의 차이는 공변량 분석 (ANOCOVA)과 다변량 분산분석 (MANOVA)으로 검증하였으며, 그 결과 "주행속도가 동일할지라도, 도로유형과 주행시간대에 따라 연료소모량의 차이가 있다"는 본 연구가설은 유의한 것으로 나타났다. 마지막으로 연료소모량의 차이를 활용하여 각 유형별 배출계수 보정 지표들을 제안하였다. 본 연구는 기존 차량 중심의 배출계수 연구에서 벗어나, 도로 교통 조건에 따른 배출계수 특성을 분석했다는 점에서 의의가 있으며, 본 연구결과를 활용하여 교통부문의 배출량 추정결과에 대한 신뢰성을 향상시킬 수 있을 것으로 기대한다.

• 한국전자통신학회논문지
• /
• 제14권3호
• /
• pp.613-618
• /
• 2019

EMF (전자기장)는 지식 기반 정보 사회에서 살기위한 귀중한 자원 중 하나다. EMF는 우리의 삶을 쉽고 편리하게 만들어주는 가전제품과 휴대 전화, 개인용 컴퓨터, 의료 기기 및 방송 타워 등의 정보 통신 기기에 사용된다. 그러나 EMF 노출과 관련된 생물학적 유해성은 전기 통신 장치로부터의 신호도 증가하고 있다. 인체에 대한 EMF 노출의 영향에 대한 연구가 오랫동안 수행되었지만 EMF 효과가 유해한 지 여부는 아직 증명되지 않았다. 본 논문에서는 생활주변의 각종 전자기기로부터 방출 되는 전자장과 그 영향에 대해서 고찰한다.