• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1862-1872
• /
• 2017

To overcome the limitations of the current Central Mobility Management (CMM) protocols, IETF has been discussing about the Distributed Mobility Management (DMM) protocols that the centralized mobility functions of Home Agents (HA) are distributed to network edges closer to mobile users. The DMM protocol has some advantages of low-cost traffic delivery and high scalability. However, it faces several problems such as a high signaling cost and a complex address management. Especially, users moving at a high speed and with long-live sessions can make these problems worse. To reduce the high signaling cost for long-live sessions, we propose a novel hybrid DMM protocol allocating different mobility anchors according to the session durations. In this paper, we analyze the performance of the proposed hybrid DMM protocol and show superior performance with respect to the signaling cost.

• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.257-263
• /
• 2012

Smart phones become popular all over the world recently. At the same time, demand of various additional services, such as SNS by utilizing low-cost reliable Wi-Fi network and position information, is expected to keep growing. In this paper, Implementation of SNS based on an Open Wi-Fi & Position Information was proposed. This service is achieved by constructing an Open Wi-Fi network based on a built AP access information database. And in order to provide durable connection in mobile environment, RSS detect AP switching module and mobile IP are utilized in the proposed service. Furthermore, with the utilization of GPS information of AP, AP providers could delivery various information such as advertisements, promotion events. In addition, it is possible for AP users to communicate with each other, thus a position information based SNS was also proposed in this paper.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.59-70
• /
• 2007

In this paper, we proposed an effective T&L(Transform & Lighting) Processor architecture for a real time 3D graphics acceleration SoC(System on a Chip) in a mobile system. We designed Floating point arithmetic IPs for a T&L processor. And we verified IPs using a SoC Platform. Designed T&L Processor consists of 24 bit floating point data format and 16 bit fixed point data format, and supports the pipeline keeping the balance between Transform process and Lighting process using a parallel computation of 3D graphics. The delay of pipeline processing only Transform operation is almost same as the delay processing both Transform operation and Lighting operation. Designed T&L Processor is implemented and verified using a SoC Platform. The T&L Processor operates at 80MHz frequency in Xilinx-Virtex4 FPGA. The processing speed is measured at the rate of 20M Vertexes/sec.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.343-354
• /
• 2003

This paper describes algorithm that minimizes recovery time of packet loss resulting from handoff in multicast environments and guarantees reliability through interaction of FN(Foreign Network) with PMTP(Predictable Multicast Tree Protocol). To solve the problems that inefficient routing and handoff delay taking plate when using hi-directional tunneling and remote subscription independently in multicast environments, proposed algorithm uses tunneling and rejoining multicast group according to the status of an arriving FA in a foreign network. Furthermore, proposed algorithm sends packet loss information and register message to previous FA or current FA at the same time. so, MH is able to recovery packet loss in handoff delay as soon as possible. As a result of performance analysis, proposed algorithm is more efficient than previous researches and is applicable to existing handoff method without requiring additional procedures.

• Journal of KIISE:Information Networking
• /
• v.36 no.5
• /
• pp.405-412
• /
• 2009

Mobile ad hoc networks (MANETs) allow mobile nodes to communicate among themselves via wireless multiple hops without the help of the wired infrastructure. In the MANET, it is required not only a route setup mechanism that makes nodes not within each other's transmission range communicate but also mechanism in order for a node to auto-configure a unique address. In this paper, we propose an address auto-configuration mechanism when MANET is connected to the Internet via several Internet Gateways and all gateways advertise the same network prefix. By using the proposed mechanism, once a node configures an Internet topologically correct and globally unique IP address, then the node can utilize the configured address even though the node moves within the MANET. Through the simulations, we analyze the performance of our proposed mechanism and, from the simulation results, we show that out proposed mechanism outperforms the existing mechanism.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.790-799
• /
• 2018

UHD broadcasting based on ATSC 3.0 is being implemented in Korea, and discussion on mobile broadcasting based on ATSC 3.0 is underway. The ATSC 3.0 standard introduces internet protocol based standards in order to facilitate the implementation of conventional broadcasting services as well as broadcasting and communication convergence services interlocking with communication services. In this process, various requirements for the receiver have been derived, and factors to consider for developing the receiver product have also increased. ATSC 3.0 broadcasting is currently in the introduction stage of the service, and additional technology development and product implementation related to the receiver should proceed until the full-scale market is formed. In this regard, this paper describes the considerations for developing UHD receiver based on ATSC 3.0 and the test procedure for verifying developed receiver.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.829-849
• /
• 2017

Due to the large-scale TV display, the convergence of broadcasting and broadband, and the advancement of signal compression and transmission technology, terrestrial digital broadcasting has evolved into UHD broadcasting capable of providing simultaneous broadcasting of fixed UHD and mobile HD. The Korean standard for terrestrial UHDTV broadcasting is based on ATSC 3.0, the broadcasting standard of North America. The terrestrial UHDTV broadcasting standard chose that as a new AV codec standard, HEVC video codec which can compress with higher efficiency compared to AVC, and MPEG-H 3D audio codec for realistic audio. Also, DASH and MMT are adopted as transmission format instead of MPEG-2 TS to support broadband as well as broadcasting network, and in order to provide 4K UHD/mobile HD service simultaneously ROUTE multiplexing technology is applied. In this paper, we propose an audio/video encoder, which is required to provide HDR/WCG supported high quality video service, 10.2 channel/4 object supporting stereo sound service, fixed UHD and mobile HD simultaneous broadcasting service based on ATSC3.0, also we implemented the ATSC 3.0 LDM system for ROUTE/DASH packager, multiplexing system and physical layer transmission/reception, and verified the service ability by applying it to real time broadcast environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.53-63
• /
• 2009

This paper is to develop WiMAX CPE(wireless AP) that can provides Wi-Fi terminal with wireless Internet service by connecting to Wibro wireless network. This AP aims to support WiBro in upstream interface basically, and Wi-Fi and 100M Ethernet interface in downstream. So, we has developed the equipment for business that wireless ISP can provide many Internet customers with wireless Internet service by using Wi-Fi terminal in subway, car, ship, and so on, and the equipment for users that a user can purchase and then install in person. For the latter, multiple Wi-Fi terminals that be registered in WiBro service can be connected to Internet simultaneously.

• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.128-137
• /
• 2006

Recently, the combination of WLAN and 3G wireless technologies will make MMS service more ubiquitous, bringing benefits to both service providers and their customers. To realize seamless MMS service over WLAN and CDMA2000 networks, we design novel seamless interworking architecture by reusing the existing standards and network elements at the same time. Based on the proposed seamless interworking architecture, we also present seamless notification architecture and seamless handover architecture that can't be possible within current MMS reference architecture. This paper will make a contribution for service providers to provide their customers with seamless MMS service over WLAN and CDMA2000 networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1572-1593
• /
• 2018

The diversity and fast growth of Internet traffic volume are highly influenced by mobile and computer applications being developed. Moreover, the developed applications are too dynamic to be identified and monitored by network administrators. Several approaches have been proposed to identify network applications, however, are still not robust enough to identify modern applications. This paper proposes both, TSA (Traffic collection, Signature generation and Applications identification) system and a derived algorithm so called CSP (Contiguous Sequential Patterns) to identify applications for management and security in IP networks. The major focus of this paper is the CSP algorithm which is automated in two modules (Signature generation and Applications identification) of the proposed system. The proposed CSP algorithm generates DNA-like unique signatures capable of identifying applications and their individual services. In this paper, we show that the algorithm is suitable for generating efficient signatures to identify applications and application services in high accuracy.