• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.4
• /
• pp.438-449
• /
• 1996

Development of alimentary tract and nutrient absorption in embryo of the viviparous teleost surfperch, Ditrema temmincki were investigated with histochemical methods. Just after hatching mouth of the embryo was opened, and the end part of alimentary tract was opened in TL 4.0 mm. Mucosal folds in the alimentary tract appeared at posterior region from TL 5.0 mm. In TL 30.0 mm, the alimentary tract of the embryo could be distinguished into pharynx, esophagus, anterior intestine, mid intestine, posterior intestine, rectum and anus. From over TL 50.0 mm, the internal histological patterns of the alimentary tract showed similar structures as seen in the adult. The mucous cells in the pharynx were positively reacted to PAS in TL 7.0 mm. PAS positive goblet cell appeared in the intestine from 25.0 mm, from TL 30.0 mm in the rectum, from TL 40.0 mm in the anus and from 50.0 mm in the esophagus. Yolky materials were absorbed completely in TL 6.0 mm. PAS positive polysaccharide absorptive cells began to appear at the posterior parts of the intestine in TL 7.0 mm and appeared in TL 13.0 mm at the rectum, in TL 15.0 mm at the anterior intestine and in TL 40.0 mm at the anterior part of anus. During the gestation period, nutrient absorptive type of the embryo within the maternal body is a placental analogues type of metrotrophy.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.117-125
• /
• 2021

Purpose: To purpose of this study is to find the correlation of the Set-up error according to the couch rotation and suggest additional margin setting for the GTV. Target and Method: Each scenario treatment plan was created by making the frequency of non-coplanar beams different among all beams. The set-up error value was measured by using the Exact System and the dose accuracy was evaluated by creating a re-treatment plan. Results: When the couch was rotated by 30°, 45°, 60°, and 90°, the mean of the X-axis values was measured to be 0.29 mm, 0.26 mm, 0.51 mm, and 0.08 mm, respectively. The mean of the Y-axis values was measured to be 0.75 mm, 0.5mm, 0.35 mm, and 0.29 mm, respectively. The mean of the Z-axis values was measured to be 0.5 mm, 0.28 mm, 0.22 mm, and 0.1 mm, respectively. There were dose reductions of 0.1%, 3.1%, 1.9% in D99 for 1-NC VMAT, 2-NC VMAT, and 3-NC VMAT, respectively. Conclusion: When treating with 50% or more of non-coplanar beams among total beams, image verification is required. And it is considered to make the treatment plan by adding a 1.5 mm margin to the GTV.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.1
• /
• pp.71-77
• /
• 2007

Shoe's size and shape are determined by the last that takes shape of foot because last is the mold of shoe in development and manufacturing process. Then adaptation between foot and shoe is dependent on the last. In mass shoe production, model size is developed in the first place, other sized lasts are made through the grading process based on model size. The most important factor in grading system is grading deviation that must be same amount induced from foot measuring database. At present, most of the last manufacturing companies in korea using 260mm as a standard foot model size. When length grading deviation is 5mm, the ball girth grading deviation is 3.7mm and the ball width grading deviation is 1.2mm. I verified existing grading system by comparing grading results with foot measuring data. Also, I proposed reasonable grading deviation and application method of grading system. From the analysis of foot measuring database, reasonable grading deviations are 1.22mm in ball width and 0.84mm in ankle height in case of length grading deviation is 5mm. I confirmed that the current grading system is very accurate. When we grade last from 230mm to 290mm by current grading system based on model size 260mm, there is grading error over 1mm in the front outside area of foot. This error level of 1mm is no problem in normal walking shoe's last, but it induces adaptation problems in sports and special purposed shoe's last. Therefore using of three standard model size is recommended in grading men's last for reducing grading deviation error under the level of 1mm. It is specifically described as 235mm in 225-245mm, 260mm in 250-270mm, 285mm in 275-295mm. According to the above recommended grading system, it is enough to measure only three foot sizes in case of foot measuring project for men's last development.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.15-23
• /
• 2016

A study was conducted to evaluate the effects of irrigation (amount, interval) on tree growth, fruit quality, and cracking of organic 'Campbell Early' grapevine in 2012 and 2013. Three irrigation treatments were applied using a sprinkler system from mid-June to mid-August in 2012 and 2013, as follows: 10 mm was applied daily (10 mm-IR), 20 mm was applied every two days (20 mm-IR), and 30 mm was applied every five days (30 mm-IR). Soil electrical conductivity (EC) and temperature were found to be greatest in the 10 mm-IR treatment in both years. Soil moisture content ranged between 20-40% in the 10 mm-IR, between 20-60% in the 20 mm-IR, and between 20-70% in the 30 mm-IR treatment plots. The total number of leaves per shoot and shoot growth were found to be greatest in the 20 mm-IR and 30 mm-IR treatments, respectively. Cluster and berry weights, and cluster and berry sizes were not consistently affected by the treatments. The 10 mm-IR treatment resulted in an increase in fruit SSC, SSC/acidity ratio, and berry skin pigmentation ($b^*$; blue). Approximately 5% of fruit cracking was observed on average over both years in the 10 mm-IR-treated fruit, while the 30 mm-IR treatment resulted in nearly 18% of cracking in 2012. Average marketable fruit yield per year over two years was greatest for the 10 mm-IR treatment ($24.4t{\cdot}ha^{-1}$) followed by the 30 mm-IR treatment ($22.7t{\cdot}ha^{-1}$) and lastly the 20 mm-IR treatment ($22.2t{\cdot}ha^{-1}$). Thus, the 10 mm-IR treatment represents a suitable irrigation regimen for controlling leaf and shoot growth of vines grown under a rain-shelter system in sandy loam soils, while improving fruit sugar contents and skin color and limiting fruit cracking.

• The Journal of the Korean dental association
• /
• v.15 no.1
• /
• pp.41-45
• /
• 1977

For biometric study on the widlth of mouth in singaporian the author measured the transversal width of mouth, Longitudinal width of mouth and Interdental space in 652 cases of the total cases 317 were male (chinese 235. malay50, Indian 32) and 335 Female (Chinese 260, malay 53. Indian 22) and Ages ranged from 5 to 25 yeass old. The fallowing result was obtained. 1) In Adult, transversal width of mouth was 54. 20±0.22mm in male, 53.00±0.10mm in female and 40.03±0.26mm in male, 39.39±0.30mm in female of children. 2) In Abult, Longitudinal width of mouth was 52.00±0.12mm in male, 48.40±0.15mm in female and 44.50±0.13mm in male 44.20±0.30mm in female of children. 3) In Adult, Interdental Space (anterior teeth) was 44.20±0.15mm in male. 44.00±0.20mm in Fmale and 38.40±0.15mm in male, 37.17±0.21mm in Female of Children.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1801-1802
• /
• 2006

강우량계는 기상관측 장비중 비가 온 양을 측정하기 위한 장비로 전도형, 저수형, 중량형, 로드셀형 등 다양한 종류의 강우량계가 있다. 전도형 우량계의 경우 단순한 측정방법 및 유지보수의 용이성, 접점방식에 의한 신호의 디지털화 적용성이 우수하기 때문에 가장 널리 사용되고 있다. 전도형 우량계는 분해능에 따라 0.1mm, 0.2mm, 0.5mm, 그리고 1.0mm급으로 분류며, 저수지 관리를 위해 사용되고 있는 우량계는 1.0mm 급을 주로 사용하고 있으며, 보다 정밀하게 측정하기 위하여 0.5mm 급 우량계도 사용하고 있다. 이러한 전도형 우량계의 정확도를 검정하기 위한 방법으로 수자원연구원에 질량측정에 의한 검 교정을 할 수 있는 표준교정시스템이 구축되어 있으며, 이 시스템을 이용하여 0.5mm 및 1.0mm 전도형 우량계에 대하여 강우강도를 20, 40, 60, 80, 100, 120, 140, 160, 180, 200 mm/h로 가변하면서 강우강도의 변화에 따른 분해능이 다른 우량계의 오차특성을 비교 분석하고자 한다.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.204-211
• /
• 1994

Micro array lens systems are designed for a faximile or copy machine. The array type is hexagonal. Diameter of a lens is 0.16 mm and the distance of the center of the nearest neighbor is 0.192 mm. The magnitude of the lens system is 1:1. Working distane is 10.55 mm and the spot size is less than 0.04 mm radius on axis and 0.20 mm off-axis in case of single layer system. Working distance is 7.90 mm and the spot size is less than 0.07 mm radius on axis and 0.09 mm radius off axis in case of double layer system. Performance of single layer micro array lens system and double layer micro array lens system are compared with the characteristics of the ray fans.y fans.

• Restorative Dentistry and Endodontics
• /
• v.12 no.2
• /
• pp.83-90
• /
• 1987

Composite resins has been widely used in dental clinics because of esthetic restoration. The aim of this study was to assess the effects of the cavity designs on the compressive stress of resin restoration. So, the author made the standardized specimen of four types (Type of speciemen are width 1.5mm, depth 2mm, width 1.5mm, depth 3mm, width 2mm, depth 2mm, width 2mm, depth 3mm). The compressive strength was measured by universal testing machine (Tong Kwang Co.) The results indicating following; 1. There was a statistic significance of compressive strength between four cavity forms. 2. There was no difference of significance of compressive strength between two resins. 3. There was a significance of compressive strength between depth 3mm width 1.5mm and depth 3mm width 2mm.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4637-4641
• /
• 2023

For nuclear decommissioning applications, a study was conducted to investigate the feasibility of using a laser for long-distance cutting in complex structures. Cutting tests were performed on stainless steel plates with thicknesses ranging from 10 mm to 30 mm at distances of 300 mm-700 mm from the laser head, using a laser power of 6 kW. Remarkably, the 10 mm and 20 mm thick stainless-steel plates were successfully cut at a distance of 700 mm from the head. Based on the trends observed in the results, it is anticipated that these thicknesses could also be cut at distances of approximately 1 m. Similarly, the 30 mm thick stainless-steel plate was effectively cut at a distance of 500 mm from the head. To evaluate the amount of secondary waste generated, the kerf width was measured. Due to the long-distance cutting, the average kerf width ranged from 6 mm to 16 mm. Despite the wider kerf width, long-distance cutting holds promise for efficiently handling hard-to-reach targets in nuclear decommissioning scenarios.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.619-626
• /
• 2020

This study aimed to identify the error rates in Catheter Calibration Mode, Auto Calibration Mode, and Segment Calibration Mode among many calibration modes as a quantitative evaluation tool used for predicting the diameter and length of balloon or stent in percutaneous intravascular balloon dilatation or stent insertion. Our experiment was conducted with Copper Wire of 2 mm × 80 mm (diameter × length) manufactured elaborately for quantitative evaluation in calibration and Metal Ball of 5, 10, 15, 30, and 40 mm and Acryl Phantom of 25 mm, 50 mm, 75mm, 100 mm, 125 mm, 150mm, 175 mm, and 200 mm. At each height, subtraction images were acquired with a cineangiograph and Stenosis Analysis Tool as a software provided by the equipment company was used for measurement. To evaluate the error rates in Catheter Calibration Mode, Copper Wire was put on each acryl phantom before shooting. Copper Wire of 2 mm in diameter was set as a diameter for catheter, and Copper Wire of 8 mm in length was measured with Multi-segments. As a result, the error rates appeared at 1.13 ~ 5.63%. To evaluate the error rates in Auto Calibration Mode, the height of acryl was entered at each height of acryl phantom and the length of 8 mm Copper Wire was measured with Multi-segments and as a result, the error rates appeared at 0 ~ 0.26%. To evaluate the error rates in Segment Calibration Mode, each metal ball on the floor of table was calibrated and the length of 8 mm Copper Wire on each acryl phantom was measured and the length of 8 mm Copper Wire depending on the changes of acryl phantom height was measured with Mutli-segments and as a result, the error rates appeared at 1.05 ~ 19.04%. And in the experiment on OID changes in Auto Calibration Mode, the height of acryl phantom was fixed at 100mm and OID only changed within the range of 450 mm ~ 600 mm and as a result, the error rates appeared at 0.13 ~ 0.38%. In conclusion, it was found that entering the height values in Auto Calibration Mode, among these Calibration Modes for evaluating quantitative vascular dimensions provided by the software was the calibration method with the least error rates and it is thus considered that for calibration using a metal ball or other objects, putting them in the same height as that of treatment sites before calibrating is the method that can reduce the error rates the most.