• IE interfaces
• /
• v.19 no.2
• /
• pp.117-123
• /
• 2006

Many products, such as gasoline, polymer plastics, alloys, and ceramics are manufactured by mixing two or more ingredients or components. When we are to develop new mixture products, we must deal with a long list of potentially important component variables. This paper introduces some mixture screening designs, analysis tools for screening important variables, and a guideline for applying these analysis tools. The results of this paper will be helpful to engineers who work in the research and development sector of mixture product industries.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.3
• /
• pp.141-150
• /
• 2000

This study aim is analysis device development for design of experiment with calcium chloride relation used a hardener to search cause of product crack, product reliability improvement building data-base program for computer system of mixture rate, product improvement, and new product development.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.437-444
• /
• 2010

Dry Process(natural drying, hot-air drying, oil fry drying), optimized mixture ratio and the condition of carbonization was carried out in order to improve the product durability develop eco-friendly solid fuel mixing food waste and paper sludge. As a result of the experiment, oil fry drying process was the fastest method for drying food waste and paper sludge mixture that contains 80% water inside, and the optimized mixture ratio to minimize the generating concentration of chlorine gas against caloric value of mixture ratio was 7:3. Additionally proper temperature of product carbonization was about $200^{\circ}C$ and shown increasing product durability through the carbonization. Therefore, the pelletized solid fuel be shaped diameter around 0.5cm, length 2cm under which was pulverized and molded using 7:3 mixture of food waste, and paper sludge was the eco-friendly solid fuel possible to be industrialized which is consist of chlorine concentration of below 2.0wt% and the lowest caloric value of over 5,000kcal/kg. In conclusion, this developing manufacturing process of the solid fuel can be interpreted to contribute alternative energy development in accordance with low carbon and green growth era.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.305-306
• /
• 2006

In process for production of Rubber Scheme Product that have the most inferior Working Environment is Medicine mixture and Scheme processing. Applying automation and Environment Treatment technology to the hazardous chemical and mixture processing, Through developed 'Mixture Automatic Machine for hazardous chemical Interruption type that is occurred at mixing rubber medicines', we try to decline worker's intensity of labour, Also overcomes solution of work evasion phenomenon and manpower supply and demand's difficulty by forming agreeable working environment and through the automatic scheme and mixture processing by preventing that hazardous chemical had known as disease causes of various importance disease is exposed to worker during the work. and we plan to do so that production of high added value product may be available.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.1
• /
• pp.12-16
• /
• 2005

As a silicate source to rice, a coal ash was selected and mixed with phosphor-gypsum (50:50, wt $wt^{-1}$) to reduce the potential of boron toxicity and to supply calcium element. We expected that high con tent of calcium in this mixture might convert water-soluble phosphorus to less soluble forms and then reduce the release of soil phosphorus to surface runoff. The mixture was applied with the rate of 0, 20, 40, and 60 Mg $ha^{-1}$ in paddy soil (Nagdong series, a somewhat excessively drained loamy fine sand) in Daegok, Jinju, Korea The mixture reduced significantly water-soluble phosphorus (W-P) in the surface soils by shifting from W-P and Fe-P to Ca-P and Al-P during whole rice cultivation. In contrast with W-P, plant available phosphorus increased significantly with the mixture application due to high content of phosphorus and silicate in the mixture. The mixture of coal ash and phosphor-gypsum (50:50, wt $wt^{-l}$) would be a good alternative to reduce a phosphorus export in rice paddy soil together with increasing rice yields.

• Journal of Korean Society for Quality Management
• /
• v.42 no.4
• /
• pp.757-768
• /
• 2014

Purpose: In this paper we present a case study of developing fast curing adhesives for insulation material of LNG carriers using an extreme vertices design with four mixture components. Three material properties are considered - shear strength, viscosity, and tensile strength. In the optimization experiment, we used hardness instead of tensile strength due to shortage of specimens. Methods: We employ four-factor extreme vertices design with 19 runs and desirability function approach for simultaneously optimizing three responses. After selecting optimal condition of the mixture components, we do confirmation experiments to verify the reproducibility of the optimal condition under manufacturing circumstance. Results: Simultaneous optimal condition for the three responses, that is, shear strength, viscosity, and harness is obtained. At the optimal condition, confirmation experiments are executed in manufacturing circumstance. The variation for the shear strength is not satisfactory, which is due to the variation of the humidity. Conclusion: At the optimal condition three material properties are satisfactory. To reduce the variability for the shear strength, robust design is needed.

• Culinary science and hospitality research
• /
• v.6 no.3
• /
• pp.281-289
• /
• 2000

By adding mushroom powder in baking white bread all the edible ingredients and numerous effectiveness of green tea can be consumed completely and the beautiful natural colors of green tea can result the variety of colors of cookies and breads. In this thesis, I used sensory evaluation and mechanical test to decide the appropriate amount of mushroom powder added in baking white bread among the ratios of 1%, 2%, 3%, 4%, 5% of mushroom powder relative to flour. I find the followings. In sensory evaluation. the color of white bread resulted from the addition of mushroom powder was most attractive in The 3% mixtures tasted most salty and other than this mixtures made no differences in salty tastes. The 3% mixture tasted most sweet and the same mixture resulted best in astringent taste. On the other hand, the overall test agreed almost with the sensory tests and there were some significant differences when p< 0.05. In summing up the above findings of our investigations, the 3% mixture of mushroom powder produces the best white Bread.

• Journal of the Korean Ceramic Society
• /
• v.48 no.1
• /
• pp.106-109
• /
• 2011

In order to fabricate 8YSZ thick film by silk screen printing, YSZ(yttria-stabilized zirconia) commercial powder was used as starting materials. Paste for screen printing was made by mixing 8YSZ powder and organic vehicles. 8YSZ thick film was formed on $Al_2O_3$ substrate. The crystal structure, and microstructure were investigated. Grain size of 8YSZ was increased with increasing calcination temperature and rapid grain growth was shown after calcination at $1300^{\circ}C$. Microstructure showed the mixture of large and small grain size after $1400^{\circ}C$ sintering. Shrinkage rate of 8YSZ thick film sintered at $1400^{\circ}C$ was more than 40%.

• Natural Product Sciences
• /
• v.24 no.4
• /
• pp.293-297
• /
• 2018

Sasa quelpaertensis Nakai leaves contain a mixture of polysaccharides, amino acids, and polyphenols, which mediate various biological activities. For efficient utilization of its leaf, we reported the preparation procedure for phytochemical-rich extract (PRE) using the leaf residue, which was by-product of hot water extraction. This study was undertaken to evaluate the effects of PRE and its major constituent, p-coumaric acid,on the growth of several human cancer cell lines (MKN-74, MKN-45, SNU-1, SNU-16, and HL-60). The ethyl acetate fraction of PRE and p-coumaric acid significantly inhibited the proliferation of MKN-74 and HL-60 cells, respectively, and induced cell apoptosis, down-regulated Bcl-2 and poly (ADP-ribose) polymerase levels, and up-regulated those of Bax and caspase-3. These results show the potential utility of S. quelpaertensis Nakai leaves in cancer prevention.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.237-244
• /
• 2016

Background: Korea Atomic Energy Research Institute is developing a fission product transport module for predicting the behavior of radioactive materials in the primary cooling system of a nuclear power plant as a separate module, which will be connected to a severe accident analysis code, Core Meltdown Progression Accident Simulation Software (COMPASS). Materials and Methods: This fission product transport (COMPASS-FP) module consists of a fission product release model, an aerosol generation model, and an aerosol transport model. In the fission product release model there are three submodels based on empirical correlations, and they are used to simulate the fission product gases release from the reactor core. In the aerosol generation model, the mass conservation law and Raoult's law are applied to the mixture of vapors and droplets of the fission products in a specified control volume to find the generation of the aerosol droplet. In the aerosol transport model, empirical correlations available from the open literature are used to simulate the aerosol removal processes owing to the gravitational settling, inertia impaction, diffusiophoresis, and thermophoresis. Results and Discussion: The COMPASS-FP module was validated against Aerosol Behavior Code Validation and Evaluation (ABCOVE-5) test performed by Hanford Engineering Development Laboratory for comparing the prediction and test data. The comparison results assuming a non-spherical aerosol shape for the suspended aerosol mass concentration showed a good agreement with an error range of about ${\pm}6%$. Conclusion: It was found that the COMPASS-FP module produced the reasonable results of the fission product gases release, the aerosol generation, and the gravitational settling in the aerosol removal processes for ABCOVE-5. However, more validation for other aerosol removal models needs to be performed.