• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.463-473
• /
• 2015

Three full-scale instrumented test slabs were constructed and tested using a heavy vehicle simulator (HVS) to evaluate the structural behavior of internally cured concrete (ICC) for use in pavements under Florida condition. Three mix designs selected from a previous laboratory testing program include the standard mixture with 0.40 water-cement ratio, the ICC with 0.32 water-cement ratio, and the ICC mixture with 0.40 water-cement ratio. Concrete samples were prepared and laboratory tests were performed to measure strength, elastic modulus, coefficient of thermal expansion and shrinkage properties. The environmental responses were measured using strain gages, thermocouples, and linear variable differential transformers instrumented in full-scale concrete slabs. A 3-D finite element model was developed and calibrated using strain data measured from the full-scale tests using the HVS. The results indicate that the ICC slabs were less susceptible to the change of environmental conditions and appear to have better potential performance based on the critical stress analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.55-58
• /
• 2004

High Xe-content PDP characteristics are discussed. A high efficacy, up to 5 lm/W for a 50% Xe in Ne gas mixture, is realized in 4-inch color PDP test panel designs with low cost stripe-type barrier rib structures, that are powder blasted in soda lime glass. Furthermore, for a high Xe-content a high luminance can be obtained with a relatively small electrode area. Therefore the inter cell gap and the driving margin can be increased in a stripe-type barrier rib structure. Finally, for a high Xe-content the panel lifetime increases, due to increasing luminance and firing voltage stability. Clearly, these findings may direct the design development for next generation PDPs towards a high Xe-content

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.180-185
• /
• 1996

Construction activities and operation of transportation facilities have caused unfavorable effects such as civil petitions associated with vibration-induced damages or nuisances. The objedtive of this research is to develop vibration-controlled concrete containing foams, latex, rubber powders, plastic resins and etc as a concrete mixture. As the first step to achieve this research, preliminary mix designs have been carried out to find out an appropriate mix proportion above 200kg/㎠ in uniaxial compressive strength, and investigate their dynamic mechanical characteristics such as dynamic elastic moduli, material damping ratio, Poisson's ratio, resonant frequency and etc.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.983-989
• /
• 2005

Secondary batteries with high performance are essential in widespread use of modern portable devices such as cellular phones and laptop computers. High energy density, long cycle life, and safety are some of important requirements for secondary battery. To achieve such characteristics, a mixing proportion of electrolyte solution ingredients in the battery should be carefully chosen. In this paper, using statistical design of mixture experiments (DOME), we attempt to find an optimum condition of designing the secondary battery. DOME has a distinct feature in that the experimental region is represented by simplex, rather than hypercube, because the sum of blend proportions should be unity. Several designs based upon this point have been proposed for mixture experiments. Among them, an extreme vertices design is employed in this paper because there are a couple of blend constraints to be considered. In order to investigate how the mixing proportion interacts with other manufacturing factors, a fractional factorial design is also included across the extreme vertices design. As a result, we find that the blend proportion of solution ingredients has a significant effect on battery performances. By simultaneously optimizing two battery capacities, this paper proposes an optimum blend proportion according to process factor settings.

• 한국식품과학회지
• /
• 제35권4호
• /
• pp.617-622
• /
• 2003

두유박 시리얼을 제조하는데 최적 배합비를 산출하기 위하여 혼합물 실험 계획법을 사용하였다. 두유박 $30{\sim}80%$과 옥분 $20{\sim}70%$의 제약조건으로 실험디자인을 하여 압출성형을 한 결과, 두유박 함량이 증가할수록 시리얼의 팽화율은 작아지고 용적 밀도는 높아진 반면에 옥분의 함량이 증가할수록 팽화율과 절단강도, 수분용해지수, 수분흡수지수를 증가시켰다. 시리얼의 색도에서는 두유박을 첨가할수록 어두워지고, 옥분은 $L^*$값과 $b^*$값에 큰 영향을 주었다. 모델화 및 분석을 통한 반응 결과는 팽화율, 절단강도, 수분흡착지수는 quadratic 모델이 설정되고, 용적밀도, 수분용해지수, 색도는 linear 모델이 설정되었다. 색도의 $a^*$을 제외한 모든 반응결과에서 5% 이내의 유의차를 보여주어 모델에 대한 적합성을 입증하였고, 예측된 반응식을 통하여 혼합물내의 성분들이 시리얼에 미치는 영향을 살펴볼 수 있었다. 결과적으로 각 반응의 모델에서 나타난 계수를 이용한 수치 최적화를 하였을 때, 두유박 46.19%, 옥분 53.81%의 최적 배합비가 산출되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권3호
• /
• pp.26-38
• /
• 2020

자기 충전형 콘크리트의 배합물 설계는 전형적인 다기준의사결정의 과정이다. 본 연구에서는 실험설계법과 반응표면법을 이용하여 SCC 배합물 전산 설계가 가능하도록 재료성능 및 비용모델을 생성하고, 요구조건을 반영한 여러 성능 사이의 상대적 중요도를 산정하여 가중 다목적 설계문제로 정식화하여 수치최적해를 계산함으로써 비용효율을 고려한 SCC최적설계를 수행하였다. 실험비용과 시간을 고려하여 SCC의 수많은 요구성능 중 압축강도, 철근충전성, 재료분리저항성, 비용정보 등을 다목적 최적화의 목적함수로 설정하였다. 재료경제성을 최적재료설계프로세스에 합리적으로 반영함으로써 경제적 콘크리트배합설계를 수행할 수 있었으며, 본 연구 결과 실험점 계획에서부터 최적해 산출에 이르는 과정을 객관적인 프로세스로 구성함으로써 콘크리트 범용 최적재료설계기술 및 전산화를 기대할 수 있다.

• 한국식품조리과학회지
• /
• 제28권1호
• /
• pp.67-76
• /
• 2012

This study examined the optimal ingredient mixing ratio for the preparation of steamed cake containing mugwort (Artemisia princeps var. orientalis) powder. After preliminary studies, the following ingredient ranges were determined; 110~129% sugar, 3~8% mugwort powder, 10~25% oil. Among the different mixture designs, the D-optimal design was chosen for analysis. The results of F-test, specific gravity, viscosity, volume and color values (L, a, b), hardness decided a linear model, while the sensory characteristics (color, taste, texture and overall acceptance) decided a quadratic model. The fitness analysis results showed that in all characteristic, the probabilities were significant within 0.05%; thus, the models were accepted as appropriate. The response surface and trace plot results showed that increasing amounts of mugwort powder decreased the brightness, and increased redness and yellowness. As the level of added oil increased, the softness of the cake increased. Cake samples received low sensory evaluation scores when sugar, mugwort powder, and oil were added above their optimal levels. The optimum formulations by the numerical and graphical methods, were similar, and with the numerical method presented as: sugar, mugwort powder, and oil at 120.7%, 5.1%, and 16.2%, respectively(flour weight basis). The above results demonstrate the feasibility of adding mugwort powder to sponge cake, and therefore, the commercialization of mugwort powder cake marketed as a functional food is deemed possible.

• 한국도로학회논문집
• /
• 제12권2호
• /
• pp.81-90
• /
• 2010

본 연구는 배수성 아스팔트 포장에 사용하기 위하여 국내에서 개발한 개질 아스팔트 바인더 및 혼합물의 실내 및 현장 공용성을 평가한 연구이다. 국내에서 개발된 개질 아스팔트 2종에 대한 DSR, BBR 및 다양한 바인더 시험을 실시하여 공용성능이 상대적으로 우수한 1종의 개질 아스팔트를 선정하였다. 선정된 개질 아스팔트와 기존에 일본에서 사용되는 개질 아스팔트를 사용하여 각각에 대하여 배합설계를 실시하고, 배수성 아스팔트 혼합물을 생산하여 실내 공용성을 비교하기 위해 휠트래킹 시험, 수분손상 시험, 피로시험 등을 수행하였다. 그 결과, 공용특성 측면에서 국산의 개질 아스팔트가 일본 개질 아스팔트와 비슷하거나 경우에 따라서는 우수함을 확인하였다. 실내시험결과를 바탕으로 현장 시험시공을 실시하였고, 추적조사를 통하여 시간에 따른 공극률과 소음특성의 변화를 측정하였다. 그 결과 시공 초기에는 배수 및 소음 저감 능력이 우수하였으나 2년이 경과한 후 소음 저감 능력이 감소하여 SMA 포장과 비슷한 수준의 소음저감효과를 나타내었다.

• 대한가정학회지
• /
• 제43권5호
• /
• pp.249-265
• /
• 2005

Creative application in elaborate techniques can not only make design constructs productive but also can widen designers' figurative perspectives. There are many techniques applied in fashion design such as folds, patchworks, embroidery, dyeing, industrial treatment, etc. In particular, folds play a significant part in enlightening clothes uniqueness in contemporary fashion design. The primary purpose of this study was to make new suggestion for the production of high value-added fashion goods by reviewing and synthesizing fold expressions. Diverse fold designs were retrieved through a comprehensive literature review on topic-related books, fashion dictionaries, and fashion encyclopedias. Significant cases of fashion designs using folds were retrieved from fashion magazines uploaded from 2000. There are three types of folds applied in fashion design. (1) The folds by needlework like tucks, smocking, shirring, and trimming type folds(ruffle, frill, flounce, and ruche). (2) The folds by chemical or mechanical treatment like permanent pleats and crinkle. (3) The folds of formative dress like drape. From a comprehensive review of the folds design cases after 2000, the following characteristics of folds design were identified: (1) a highlighted role in the whole, (2) mixture and deformation of techniques and materials, (3) 3-D surface effect, (4) creation of a unique figurative beauty, and (5) expression of diverse fashion image.

• 패션비즈니스
• /
• 제26권4호
• /
• pp.18-31
• /
• 2022

Fashion is one of the main environmental pollution industries. To reduce pollution, much of the deadstock clothes are given a new value by being redesigning based on the designer's competency. This study aims to promote the revitalization of redesigning by analyzing and presenting hybrid design characteristics of the Sacai design collection, as a redesigning brand, and formative element characteristics of redesigning. A theoretical study using previous research on redesigning and related books and an empirical study analyzing the Sacai Collection were conducted. Based on the study results, there are four types of redesigning processes; recombination of heterogeneous clothing structure, reorganization by reversed function and position, reorganized composition by material processing, and mixing of heterogeneous materials. In the recombination of heterogeneous clothing structures, heterogeneous materials and structures coexist by combining the clothing components with other clothing elements. The second is the reconstruction by subversion. The third is reconstruction by material processing. The fourth is a mixture of disparate materials. This study has innovative redesign features from Sacai designs, and there are plans for a follow-up study that will analyze the work of another designer who is recognized for the excellence in redesigning.