DOI QR코드

DOI QR Code

Evaluation of Internally Cured Concrete Pavement Using Environmental Responses and Critical Stress Analysis

  • Kim, Kukjoo (Engineering School of Sustainable Infrastructure and Environment, University of Florida) ;
  • Chun, Sanghyun (Engineering School of Sustainable Infrastructure and Environment, University of Florida)
  • Received : 2015.05.26
  • Accepted : 2015.09.25
  • Published : 2015.12.31

Abstract

Three full-scale instrumented test slabs were constructed and tested using a heavy vehicle simulator (HVS) to evaluate the structural behavior of internally cured concrete (ICC) for use in pavements under Florida condition. Three mix designs selected from a previous laboratory testing program include the standard mixture with 0.40 water-cement ratio, the ICC with 0.32 water-cement ratio, and the ICC mixture with 0.40 water-cement ratio. Concrete samples were prepared and laboratory tests were performed to measure strength, elastic modulus, coefficient of thermal expansion and shrinkage properties. The environmental responses were measured using strain gages, thermocouples, and linear variable differential transformers instrumented in full-scale concrete slabs. A 3-D finite element model was developed and calibrated using strain data measured from the full-scale tests using the HVS. The results indicate that the ICC slabs were less susceptible to the change of environmental conditions and appear to have better potential performance based on the critical stress analysis.

Keywords

References

  1. Bentz, D. P., Lura, P., & Roberts, J. W. (2005). Mixture proportioning for internal curing. Concrete International, 27(2), 35-40.
  2. Bentz D. P., & Weiss, W. J. (2011). Internal Curing: A State-of-the-Art Review, National Institute of Standards and Technology [NIST].
  3. Byard, B., & Schindler, A. K. (2010). Cracking tendency of lightweight concrete, Research report. University of Auburn, Auburn, AL.
  4. Cusson, D., & Hoogeveen, T. (2008). Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking. Cement Concrete Research, 38(6), 757-765. doi: 10.1016/j.cemconres.2008.02.001.
  5. de Sensale, G. R., & Goncalves, A. F. (2014). Effects of Fine LWA and SAP as Internal Water Curing Agents. International Journal of Concrete Structures and Materials, 8(3), 229-238. https://doi.org/10.1007/s40069-014-0076-1
  6. Lotfy, A., Hossain, K. M., & Lachemi, M. (2015). Lightweight self-consolidating concrete with expanded shale aggregates: Modelling and Optimization. International Journal of Concrete Structures and Materials, 9(2), 185-206. https://doi.org/10.1007/s40069-015-0096-5
  7. Mehta, P. K., & Monteiro, P. J. (2013). Concrete microstructure, properties, and materials (4th ed.). New York, NY: McGraw-Hill Education.
  8. Portland Cement Association, Thickness Design for concrete Highway and Street Pavements, Pulication No. EB109.01P, Slokie, IL, 1984.
  9. Schlitter, J., Henkensiefken, R., Castro, J., Raoufi, K., Weiss, J., & Nantung, T. Development of internally cured concrete for increased service life. Publication FHWA/IN/JTRP-2010/10. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, IN, 2010. doi:10.5703/1288284314262.
  10. Tia, M., Bloomquist, D., Alungbe, GD., & Richardson, D. (1991). Coefficient of thermal expansion of concrete used in Florida, Research report. Gainesville, FL: University of Florida.
  11. Tia, M., Wu, C. L., Ruth, B. E., Bloomquist, D., & Choubane, B. (1989). Field evaluation of rigid pavements for the development of a rigid pavement design system-Phase IV, Research report. Gainesville, FL: University of Florida.
  12. Villarreal, V. H., & Crocker, D. A. (2007). Better pavements through internal hydration. Concrete International, 29(2), 32-36.
  13. Weber, S., & Reinhardt, H. W. (1997). A new generation of high-performance concrete: Concrete with autogenous curing. Advanced Cement Based Materials, 6(2), 59-68. doi:10.1016/S1065-7355(97)00009-6.
  14. Wei, Y., & Hansen, W. (2008). Pre-soaked lightweight fine aggregates as additives for internal curing in concrete. American Concrete Institute, 256, 35-44. https://www.concrete.org/publications/internationalconcreteabstractsportal.aspx?m=details&i=20229.
  15. Weiss, W., Borischevsky, B., & Shah, S. (1999). The influence of a shrinkage reducing admixture on the early-age behavior of high performance concrete," 5th International Symposium on the Utilization of High Strength/High performance Concrete, (pp. 1418-1428) Sandefjord, Norway.

Cited by

  1. Temperature Reduction of Concrete Pavement Using Glass Bead Materials vol.10, pp.1, 2015, https://doi.org/10.1007/s40069-016-0130-2
  2. Optimization of Structure Parameters of Airfield Jointed Concrete Pavements under Temperature Gradient and Aircraft Loads vol.2019, pp.None, 2019, https://doi.org/10.1155/2019/3251590
  3. Nonlinear strain distribution in a field-instrumented concrete pavement slab in response to environmental effects vol.20, pp.2, 2019, https://doi.org/10.1080/14680629.2017.1395353
  4. Burnt Clay Brick Aggregate for Internal Curing of Concrete under Adverse Curing Conditions vol.23, pp.12, 2015, https://doi.org/10.1007/s12205-019-0834-3
  5. Mechanical Behavior of Concrete Pavement considering Void beneath Slabs and Joints LTE vol.2020, pp.None, 2015, https://doi.org/10.1155/2020/8826301