• Environmental and Resource Economics Review
• /
• v.14 no.1
• /
• pp.1-24
• /
• 2005

One of the most important factors that determine the quality of a stated preference study is questionnaire design. This study introduces strategies for enhancing the rationality and testing for the validity of choice experiments(CE) using "example" choice questions that mimic the main choice questions. From the case study of WTP for reduced radon radiation exposures in the home, the study found that screening out irrational responses, 12% of the effective responses, resulted in a meaningful increase in model fit. Meanwhile the study tested for anchoring effects, as a way of confirming the divergent validity of the study, by looking at equality of models estimated for two subsamples. The overall test results were mixed. The pros and cons of the questionnaire design strategy employed are also reported.

• Journal of Labour Economics
• /
• v.29 no.2
• /
• pp.67-116
• /
• 2006

This study directly analyzes the wage distributions rather than indirectly looking at a few of their moments. It also investigates wage distributions using various descriptive and semi-parametric methods. The wage distributions of Korean manufacturing industries can in general be represented by three distinct forms, underdeveloped, advanced and the medium of the two. The discrepancies in these distribution forms are explained by differences in the labor-type distributions and their weights in the composition of wage distribution forms, and further clarified through various descriptive statistics based on them. However, the descriptive statistical analysis has a limit in that it shows mixed outcomes of different categoric variables. Then, this problem is resolved by applying a semi-parametric estimation of hazard function and the marginal effect evaluations of variable changes on estimated distributions not on the function. As a result of this marginal analysis, the common features and differences of categoric variables and their intensities of effects on distributions are revealed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.3
• /
• pp.275-280
• /
• 2016

In this study, a release test bed is designed to evaluate the dynamic behaviors of a coil spring. From the release tests, the dynamic behaviors of a coil spring are analyzed. A lumped parameter spring model was established for numerical simulation of a spring. The design variables of a coil spring are optimized by using the design of experiments approach. Two-level factorial designs are used for the design optimization, and the primary effects of the design variables are analyzed. Based on the results of the interaction analysis and design sensitivity analysis, the level of the design variables is rearranged. Finally, the mixed-level factorial design is used for the optimum design process. According to the optimum design of the opening spring, the dynamic performance of the spring-operated mechanism increases by 2.90.

• Smart Media Journal
• /
• v.9 no.2
• /
• pp.86-91
• /
• 2020

The current trend of the education market is the development of the fourth industrial revolution and the development of ICT, and various technologies are developing into edu-tech technology that is integrated into the education system. In particular, the market for edu-tech systems capable of lifelike immersive learning effects in virtual space is expanding. However, education in Korean medicine is not objective because of the absence of educational simulators and systems to train and evaluate acupuncture. In this paper, we propose an acupuncture controller and a human body model to increase the effectiveness of acupuncture point training as a follow-up study of "Design of Acupuncture Contents and Dummy for Acupuncture Point Training System". Through the proposed acupuncture controller and Dummy, the accuracy of acupuncture points for the acupuncture point data matching and content motion recognition rate is presented. In addition, the results of temperature and humidity and temperature change tests for evaluating the environmental reliability of the controller are presented.

• Journal of Power System Engineering
• /
• v.22 no.1
• /
• pp.48-55
• /
• 2018

It has recently been reported that methanol fuel has been used in the product carrier with established duel fuel engine, which has been greatly reducing emissions of $CO_2$, NOx and SOx from the engine. However, to use methanol alone as fuel oil in a general diesel engine, design modification of cylinder head is needed because the ignition aid device or the duel fuel injection system is needed. On the other hand, only if the mixer is installed on the fuel oil supply line, diesel oil - methanol blending oil can be used as fuel oil for the diesel engine, but there is a problem of the phase separation when two fuels are mixed. In this study, diesel oil and methanol were blended compulsorily in preventing the phase separation with installing agitators and a fuel oil boost pump on fuel line of a test engine. Also, cylinder pressure and fuel consumption quantity were measured according to engine load and methanol blending ratio, and indicated mean effective pressure, heat release rate and combustion temperature obtained from the single zone combustion model were analyzed to investigate the effects of latent heat of vaporization of methanol on combustion stability and characteristics. As a result, the combustion stability and characteristics of 10% methanol blending oil are closest to the those of diesel oil, and it could be used as fuel oil in existing diesel engines without deterioration of engine performance and combustion characteristics.

• Physical Therapy Korea
• /
• v.22 no.4
• /
• pp.44-50
• /
• 2015

This study compared the effects of the initial head position (i.e., a HHP versus a relaxed head position) of subjects with and without a FHP on the thickness of the deep and superficial neck flexor muscles during CCF. The study recruited 6 subjects with a FHP and 10 subjects without a FHP. The subjects performed CCF in two different head positions: a HHP, with the head aligned so that the forehead and chin formed a horizontal line, and a relaxed head position (RHP), with the head aligned in a self-selected comfortable position. During the CCF exercise, the thickness of the longus colli (LCo) and the thickness of the sternocleidomastoid (SCM) were recorded using ultrasonography. The thickness of each muscle was measured by Image J software. The statistical analysis was performed with a two-way mixed-model analysis of variance. The thickness of the SCM differed significantly (p<.05) between the subjects with and without FHP. According to a post $h^{\circ}C$ independent t-test, the change in thickness of the SCM increased significantly during CCF in the subjects with FHP while adopting a HHP compared to that in the subjects without FHP. The change in thickness of the SCM was not significantly different between the two positions in subjects without FHP, and there was no significant change in thickness of the LCo muscle during the CCF exercise according to the initial position in both subjects with and without FHP. The results suggest that CCF should be performed in RHP to minimize contraction of the SCM in subjects with a FHP.

• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.63-68
• /
• 1990

The chemical ingredients such as $SiO_2,\;Al_2O_3,\;MgO,\;Fe_2O_3,\;CaO$ and $TiO_2$in silica minerals were determined by X-ray fluorescence spectrometry using a matrix correction method. The synthesized standards mixed with reagent grade oxides and the sample were diluted by fusing with 16 times $Li_2B_4O_7$. The matrix effects correlated among the ingredients were corrected by the empirical coefficient method based on the Lucas-Tooth and Pyne model. The analytical results showed relatively good agreement between the different sets of coefficients but were improved with increasing the number of standard. The accuracy of this method was also examined with the standard reference material of NIST.

• YAKHAK HOEJI
• /
• v.49 no.2
• /
• pp.140-146
• /
• 2005

Candida albicans, a polymorphic fungus, causes systemic and local infections. Recent reports show that the fungus is a main etiological agent for the arthritis. For trea tment, antifungal drugs and/or rheumatoid drugs are used, but resistance and side effects limit application of the drugs. In search of new sources for treatment of the fungal arthritis, we choose Egb 761 (extract of Ginkgo leaves 761), one of the most popular over-the-counter herbal medicines. The Egb 761 contains two major ingredients such as terpene and flavonoid. In the present study, we examined if the terpene portion of Egb 761 had anti-inflammatory activity against C.albicans-caused arthritis. The terpene was extracted with combination of methanol and water from the Egb 761, followed by gel-permeation chromatography. Presence of terpene was determined by the Salkowski colorimetric method and HPLC analysis. For an animal model of inflammation induction, mice were given an emulsion form of C.albicans cell wall mixed with Complete Freund's Adjuvant (CFA) by footpad-injection. Results showed that intraperitoneal administration of the water-soluble portion that contained terpene and flavonoid reduced the inflammation. Whereas the terpene had anti-inflammatory activity, flavonoid portion had no such activity, For determination of possible mechanism of the activity, the terpene seemed to be suppression of nitric oxide (NO) production from LPS-treated macrophages. Taken together the Ginkgo terpene may have anti-inflammatory effect against C.albicans-caused arthritis, possibly by blocking NO production.

• Journal of the Korea Convergence Society
• /
• v.8 no.4
• /
• pp.49-57
• /
• 2017

This is a convergence study about influences of hematopoietic stem cell transplantation on children growth. For this explanatory survey research, data were collected with medical record of 112 children with malignant and hematological diseases received HSCT from February to March, 2009. To analyze the growth after HSCT, mixed-effects model was used. The mean SDS of height and weight were negative values in HSCT. The mean value of SDS were significantly lower in autologous HSCT group by height(p=0.0008) and weight(p= 0.0012). Significant factors on changes of SDS of height growth were age at HSCT(p=0.0251), autologous HSCT(p=0.0020) and total dose of steroid in allogeneic HSCT (p=0.0403) and age at HSCT(p=0.0042), autologous HSCT(p=0.0035), and duration of TPN(p=0.0159) for weight growth. According to the results, we must learn to recognize the predicting growth impairment after HSCT in children. regarding nursing interventions should be conducted in the care of these children.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.6
• /
• pp.1150-1163
• /
• 2016

This study makes use of meta-analysis to statistically integrate the quantitative results of individual research on the influence of fashion product attributes on purchase; in addition, this study utilizes the effect sizes of correlation coefficients. This study was based on 24 individual studies from January 2000 to March 2015. The meta-analysis analyzed 91 effect sizes and 24 studies and calculated the correlation coefficient effect sizes. A random effect model was employed for meta-analysis because the results for the homogeneity test indicated that the effect sizes of each research were heterogeneous. The analysis results are as follows. First, when the total effect sizes of the fashion product attributes that influence clothing purchase decisions were calculated as .256; this indicated that the effect size is slightly below the mid-sized level. Second, upon examining the effect sizes of the categorized fashion product attributes, the intrinsic attributes yielded .222, extrinsic factors yielded .235, and the compiled attributes yielded .420; this demonstrated that the compiled attributes have a larger effect size than individual attributes. Third, when they were measured by the characteristics of study targets, they were larger for a mixed-gender group than women as well as for ordinary citizens than university students. When the effect sizes were measured based on the characteristics of fashion products as suggested in the study, there were significant differences with respect to sportswear, followed by SPA brand clothing, general clothing, fashion accessories, and designer clothing. The cases where the clothing were purchased in non-retail stores were found to have a slightly larger effect size than those of offline retail stores when the effect sizes were measured based on purchase routes; however, the difference was not statistically significant. Next, an investigation of the trend of effect sizes based on published year via the meta regression analysis indicated slightly larger effect sizes as shown in more recent publications, but this was not statistically significant.