• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.4
• /
• pp.285-294
• /
• 2000

To investigate the effect of Mycorrhiza (Glomus intradics) and Rhizobium inoculation on the N, P utilization and growth response of Alfalfa (Medicago saliva L.) and Perennial ryegrass (Lolium perenne L.) in mixed sward, four treatments (non-inoculation, Control; Mycorrhiza inoculation: M; Rhizobium inoculation, R and Mycorrhiza and Rhizobium inoculation, M+R) were applied. The associated analyses were canied out on the early vegetative growth stage (DAS 56, 56 days after seeding) and on the early flowering stage (DAS 126). The decreased rate of total N and P content in soil, with advancing plant growth, was relatively higher in the M and M + R treatment than control. The content of availabie phosphorus in soil at DAS 126 increased by about 34 and 38 % in M and M+R treatment compared to control (189.2 mg PzOskg DM), while non-significant changes was observed in R treatment. Total N uptake and P uptake in the control at DAS 126 were 44.71 and 3.52 mglplant in mixed sward, respectively. About 71, 98 and 197 % of increases in total N uptake and 70, 72 and 11 1 % of increases in total P uptake were estimated in M, R and M+R treatment. Comparing to control, total dry matter yield significantly increased by 27, 33 and 53 %, and crude protein yield also by 78, 83 and 204 %, respectively, in M, R and M+R treatment. The present data indicated that mycorrhiza orland rhizobium inoculation improved N, P utilization of both alfalfa and perennial ryegrass plants, and consequently increased total yield (especially by dual inoculation, M+R). (Key words : Alfalfa, Perennial ryegrass, Mycorrhiza, Rhizobium, N and P Utilization, Growth, Yield)

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.1
• /
• pp.57-65
• /
• 2011

In this paper, a good quality mesh generation for the finite element method is investigated for artificial hip joint simulations. In general, bad meshes with a large aspect ratio or mixed elements can give rise to excessively long computational running times and extremely high errors. Typically, hexahedral elements outperform tetrahedral elements during three-dimensional contact analysis using the finite element method. Therefore, it is essential to mesh biologic structures with hexahedral elements. Four meshing schemes for the finite element analysis of an artificial hip joint are presented and compared: (1) tetrahedral elements, (2) wedge and hexahedral elements, (3) open cubic box hexahedral elements, and (4) proposed hexahedral elements. The proposed meshing scheme is to partition a part before seeding so that we have a high quality three-dimensional mesh which consists of only hexahedral elements. The von Mises stress distributions were obtained and analyzed. We also performed mesh refinement convergence tests for all four cases.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.10
• /
• pp.1161-1168
• /
• 2009

Ethanol production by the simultaneous saccharification and fermentation (SSF) of low-value rice wine cake (RWC) without cooking was investigated. RWC is the filtered solid waste of fermented rice wine mash and contains 53% raw starch. For the SSF, the RWC slurry was mixed with the raw-starch-digesting enzyme of Rhizopus sp. and yeast, where the yeast strain was selected from 300 strains and identified as Saccharomyces cerevisiae KV25. The highest efficiency (94%) of ethanol production was achieved when the uncooked RWC slurry contained 23.03% starch. The optimal SSF conditions were determined as 1.125 units of the raw-starch-digesting enzyme per gram of RWC, a fermentation temperature of $30^{\circ}C$, slurry pH of 4.5, 36-h-old seeding culture, initial yeast cell number of $2{\times}10^7$ per ml of slurry, 17 mM of urea as the nitrogen additive, 0.25 mM of $Cu^{2+}$ as the metal ion additive, and a fermentation time of 90 h. Under these optimal conditions, the ethanol production resulting from the SSF of the uncooked RWC slurry was improved to 16.8% (v/v) from 15.1% (v/v) of pre-optimization.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.103-103
• /
• 2002

This study was conducted to investigate cryopreservation of pearl oyster, Pinctada fucata martensii larvae. Four cooling rates (-0.25, -0.5, -0.75 and -1.0$^{\circ}C$/min.) were used to examine a proper cooling rate during cryopreservation of trochophores before seeding temperature (-12$^{\circ}C$). Seven developmental stages (early and late trochophores, early and late D-shaped larvae and early, middle and late umbo stage larvae) and different sugars (fructose, glucose and sucrose) were used to investigate optimal larval stage and effective sugar in cryopreservation of larvae. The survival rates of frozen-thawed trochophores increased at cooling rate of -1.0$^{\circ}C$/min. As larval developing, survival rate of frozen-thawed larvae increased, except umbo stage larvae, and especially late D-shaped larvae highly survived as 91%. Addition of sugar revealed positive effect on cryopreservation in this experiment and 0.2 M glucose and sucrose mixed with 2.0 M dimethyl sulfoxide significantly enhanced survival rate of larvae (P<0.05). The results of our study indicate that desirable cooling rate, developmental stages of larvae and effective sugar far cryopreservation of pearl oyster, P. fucata martensii larvae are -1$^{\circ}C$/min, late D-shaped larvae and 0.2 M glucose and sucrose, respectively.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.104-104
• /
• 2002

This study was performed to find out the optimal larval stage among trochophore, D-shaped and umbo stage larvae and the desirable protective additive such as fructose, glucose, sucrose and trehalose with cryoprotectant for cryopreservation of surf clam, Spisula sachalinensis larvae. Dimethyl sulfoxide and ethylene glycol were used as cryoprotectant and each cryoprotectant was made to 2.0 M with previous protective additives. The larvae were immersed in the preparations waited for 15 minutes to reach equilibration, and then frozen in a program freezer (-35$^{\circ}C$) and liquid nitrogen (-196$^{\circ}C$). The freezing rate of 1.0$^{\circ}C$ /min. was used for cryopreservation of trochophores before seeding temperature (-12$^{\circ}C$). The survival rate of frozen-thawed larvae increased as larval developing and that of umbo stage larvae was the highest as 96.1 ${\pm}$ 1.0%. The presence of lower concentration of disaccharides as sucrose or trehalose significantly enhanced survival rate when mixed with cryoprotectants (P<0.05). The results of our study indicate that desirable developmental stages of larvae and protective additive for cryopreservation are the umbo stage larvae and 0.2 M sucrose, respectively.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.100.2-101
• /
• 2003

To satisfy the increasing medical demanding especially for sever burn patients to regenerate full thickness wound cure, this study developed dermis with gelatin based scaffold and perform the biocompatibility tests. To prepare scaffold 30% of gelatin was mixed with sieved salt and dried in the mold to shape then, cross linked with a water-soluble cross-linker, EDAC. Preparing the cell for seeding from a rabbit skin, the fibroblast and keratinocyte were successfully isolated and cultured in vitro. After cell and scaffold were ready, the fibroblast was seeded to the scaffold (∼10$\^$6/ cell/cm ) for preparing dermis and keratinocyte was cultured until forming the sheet. (omitted)

• Journal of the Korean earth science society
• /
• v.43 no.4
• /
• pp.498-510
• /
• 2022

Cloud-aerosol interactions are one of the paramount but least understood forcing factors in climate systems. Generally, an increase in the concentration of aerosols increases the concentration of cloud droplet numbers, implying that clouds tend to persist for longer than usual, suppressing precipitation in the warm boundary layer. The cloud lifetime effect has been the center of discussion in the scientific community, partly because of the lack of cloud life cycle observations and partly because of cloud problems. In this study, the precipitation susceptibility (S_o) matrix was employed to estimate the aerosols' effect on precipitation, while the non-aerosol effect is minimized. The S_o was calculated for the typical coupled, well-mixed maritime stratocumulus decks and giant cloud condensation nucleus (GCCN) seeded clouds. The GCCN-artificially introduced to the marine stratocumulus cloud decks-is shown to initiate precipitation and reduces S_o to approximately zero, demonstrating the cloud lifetime hypothesis. The results suggest that the response of precipitation to changes in GCCN must be considered for accurate prediction of aerosol-cloud-precipitation interaction by model studies

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.127-128
• /
• 2022

In order to realize carbon neutrality in the international society, research on supplementary cementitious materials(SCMs) has been actively conducted as a way to reduce carbon dioxide emissions in the cement industry. However, the use of SCMs causes problems of initial hydration delay and strength reduction due to the reduction of tricalcium silicate(C3S) in the cement clinker. Therefore, in this study, the initial hydration and basic characteristics of cement mortar were confirmed by adding a C-S-H based hardening acceleration to blended cement mixed with Portland cement, blast furnace slag, fly ash, and limestone power. As a result of the heat of hydration and compressive strength test, it was confirmed that when hardening acceleration was added, the initial reactivity was high, so the heat of hydration was promoted, and the initial strength was increased. It is considered to be due to C-S-H seeding effect. Therefore, it is judged that the use of C-S-H based hardening acceleration can supplement the problem of initial hydration delay of blended cement in Korea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.5
• /
• pp.292-297
• /
• 2006

A research was carried out to investigate the release pattern of slow release nitrogen fertilizer compound(SRNC) that is latex coated urea(LCU) and to recommend the application rate of the fertilizer at dry seeding rice culture in Honam plain area. The experiment was conducted at experimental field(Jeonbug series, fine silty, mixed, nonacid, mesic family of Fluvaquentic Endoaquepts) of National Honam Agricultural Research Institute. A medium late maturing rice variety (Dongjinbyeo) was seeded at the rate of $60kg\;ha^{-1}$ by drill seeder on April 1, 1997 and March 30, 1998. Fertilizer application rate was $160-90-110kg\;ha^{-1}$ for $N-P_2O_5-K_2O$. Soil ammonium nitrate($NH_4-N$) contents remained higher in all SRNC plots than conventional ones and higher with the increase of SRNC application rate until panicle formation stage, but the contents was higher in the conventional than NRNC plots at the heading stage. The plant hight was taller in SRNC than conventional plots until maximum tiller stage, but became similar in both conventional and SRNC plots at heading stage. The culm and panicle number was greater in SRNC than conventional plots throughout all growth stage, but the effective tiller rate was higher in conventional ones. Nitrogen efficiency was higher in the SRNC than conventional plots, but the efficiency was decreasing with the higher SRNC level. The spikelet number per unit area was greater in SRNC than conventional plots, and increased with higher SRNC level. The more spikelet number with higher NRNC level resulted in lower 1,000-grain weight. The rice yield in conventional plot was similar with only 60% SRNC level, but lower than 80% and 100% SRNC levels. However, slight lodging was observed in 100% SRNC level. In conclusions, we recommend NRNC application level as 80% of standard nitrogen application for early dry seeding culture of rice Honam plain area.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.225-233
• /
• 2019

This study was conduct to investigate the effect of mixed seed sowing and flour blending on the uniformity of flour quality of Korean domestic wheat. Two wheat varieties (Keumkang and Baegjoong) were selected for sowing mixed seeds, and their growth characteristics and flour quality were analyzed. Quality of flour blending with the same varieties was also evaluated. The ratios for mixed seed sowing and flour blending were from 0 to 100% with a 10% increase of interval for each treatment. On increasing the portion of Baegjoong in mixed seed sowing, the heading time was a little delayed, however, yield increased. The results of the flour quality showed lower damaged starch content and sodium carbonate SRC (solvent retention capacity) value for Keumkang than for Baegjoong. Protein quantity by protein content and quality by SDSS (Sodium Dodecyle Sulfate-Sedimentation) volume, lactic acid SRC, and mixograph pattern of Keumkang were superior to those of Baegjoong. Compared with mixed seed sowing, overall quality characteristics of flours with different ratios showed predictable and proportional change by flour blending. This demonstrated the successful application of flour blending, compared with mixed seed sowing, for improving the uniformity of flour quality.