• Journal of Animal Environmental Science
• /
• v.20 no.4
• /
• pp.183-188
• /
• 2014

Near-infrared reflectance spectroscopy (NIRS) was used to study the potential of adulteration of imported forage. Hay samples were prepared two set ; calibration set and validation one. The former were mixed 12 sets from 100% to 50% with Yangcho (Chinese leymus, leymus chinensis Trin.) and the latter were adulterated with 6 set of 8% to 38% in 5% interval. Mixed materials with Yangcho were rice straw, reed and alfalfa. Stand error of prediction (SEP) in calibration equation for alfalfa, reed and rice straw were 0.97, 0.97 and 0.99 also 0.54, 0.86 and 1.26%. Multiple correlation coefficient ($R^2$) for alfalfa, reed and rice straw were 0.99, 0.97 and 0.99. SEP in the same samples were 1.88, 2.15 and 1.49, respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.4
• /
• pp.893-898
• /
• 1996

The occlusal disharmonies resulted from labially protruded or malpositioned teeth can damage the periodontium and induce the non-inflammatory gingival recession. For these cases, a conservative approach was performed by improving oral hygiene and correcting the axial and positional status of the gingivally recessed teeth and removing the prematurely contacted areas. In some cases, rapid remission of tooth mobility and gradual decrease of gingival recession was observed just after start of treatment. In cases of gingival recession in permanent lower incisors of the children with mixed dentition, the treatment of choice is non-surgical conservative approaches. In cases when the gingival inflammation can be controlled through reinforcing the oral hygiene, when attached gingiva have a potential to increase in width through growth (not more than 1 year after eruption or not yet arrived at adult level), and when the recession can be corrected by moving the teeth from labial cortical plate through orthodontic treatment, the conservative measures would be the first choice. On the contrary, when recession has exceeded beyond the level of CEJ, when the gingival inflammation existed with the cause of poor oral hygiene, when the attached gingiva have little potential to increase (for example, more than 8 years after eruption), and when the conservative measures yielded no benefit after 4-8 weeks of treatment, the surgical approaches should be sought.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.4
• /
• pp.27-35
• /
• 2012

Recently, there has been increasing interest in the use of rain garden systems as environmentally friendly ecological infrastructures for controlling stormwater runoff and managing non-point source pollution and information for the contamination of soil and plants can be essential for sustainable rain garden management. In this study, four rain garden mesocosms, namely single species planting with Rhododendron lateritium, single species planting with Zoysia japonica, mixed planting with R. lateritium and Z. japonica, and control without plants, were tested to investigate the change in concentrations of nutrients (N and P) and heavy metals (Cd, Cu, Pb, and Ni) in the soil and plants used in the rain garden system. The presence of plants resulted in greater nutrient retention in soil and lower potential leaching from the system. All systems showed an increase in the heavy metal concentrations in soil. The concentrations of most heavy metals were found to be higher in the herbaceous plants (Z. japonica) than in the shrubs (R. lateritium). The belowground part (root) had higher heavy metal concentrations than the aboveground part (leaf) but also showed a potential increase in leaves, and hence, careful plant management should be considered during rain garden operation.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.354-361
• /
• 2022

In a direct methanol fuel cell system (DMFC), one of the drawbacks is methanol crossover. Methanol from the anode passes through the membrane and enters the cathode, causing mixed potential in the cell. Only Pt-based catalysts are capable of operating as cathode for oxygen reduction reaction (ORR) in a harsh acidic condition of DMFC. However, it causes mixed potential due to high activity toward methanol oxidation reaction of Pt. To overcome this situation, developing Pt-based catalyst that has methanol tolerance is significant, by controlling reactant adsorption or reaction kinetics. Pt/C decorated with phosphate ion was prepared by modified polyol method as cathode catalyst in DMFC. Phosphate ions, bonded to the carbon of Pt/C, surround free Pt surface and block only methanol adsorption on Pt, not oxygen. It leads to the suppression of methanol oxidation in an oxygen atmosphere, resulting in high DMFC performance compared to pristine Pt/C.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.3
• /
• pp.265-278
• /
• 2024

This study investigates the potential of cone-beam computed tomography (CBCT)-generated cephalograms as a replacement for conventional lateral cephalograms (LCs) in children and adolescents. This retrospective study included 60 individuals, equally divided into permanent and mixed dentition groups. Both groups underwent conventional LCs and CBCT scans on the same day. LCs were then derived from CBCT scans. The same examiner performed digital measurements twice, with a week's interval, identifying landmarks and obtaining 7 angular and 5 linear measurements. In the permanent dentition group, significant differences were observed between the two imaging modalities for 6 angular and 2 linear measurements. In the mixed dentition group, significant differences were observed for 3 angular and 2 linear measurements. However, none of these differences exceeded the clinically acceptable limit of 2.0° or 2.0 mm. No significant differences in any measurement were found between the two groups (p < 0.05). CBCT-generated LCs demonstrated comparable results with good reliability in both dentition groups, suggesting their potential as suitable alternatives for children and adolescents who require CBCT for clinical purposes.

• Resources Recycling
• /
• v.10 no.1
• /
• pp.42-48
• /
• 2001

The dissolution behavior of gold and silver from gold-silver alloys in aerated cyanide solutions has been investigated by an electrochemical means as well as a direct measurement of gold and silver ions reported in the bulk solution as a function of time using rotating disc electrodes. The variables studied included oxygen partial pressure, rotating speed of the disc, concentration of cyanide, temperature and composition of the allyos. The dissolution potential and the rate of dissolution were obtained in view of the anodic and cathodic current-potential relationships. The results were discussed in terms of the mixed potential theory. The results showed that the dissolution rate of gold and silver from the alloys was controlled partially by chemical reaction. but largely by transport of either oxygen or cyanide, depending on their relative concentration under the experimental conditions employed in this study.

• Journal of Environmental Science International
• /
• v.7 no.5
• /
• pp.639-645
• /
• 1998

A Jump model was evaluated for the calculation of hourly mixing height and mean potential temperature within the height. The Sump model was modified for estimation of downward heat fluxes by mechanical convections and surface heat fluxes. The surface heat fluxes were estimated from routine weather data such as solar radiation and air temperature. Total of 8 upper-air data observed at 0000UTC and 0600UTC in Osan station during April 23 to 26, 1996 were analyzed, and compared to the model results in detail. The calculated mixing heights and potential temperatures within the height were comparable to the observations, but some differences were showed. The calculated mixing heights were generally higher than observations. And, when variations of wind directions were large, the large difference of potential temperature was occurred. From the results, it was important to note that vortical motions and advections of air masses would affect to the growth of the mixing height.

• Communications of the Korean Mathematical Society
• /
• v.27 no.2
• /
• pp.243-255
• /
• 2012

In this paper, we deal with an inverse problem for electrical resistor networks to detect the location of nodes where an extraordinary currents ow into or out of the nodes proportional to the potentials on them. To achieve the goal, we solve a special type of mixed boundary value problem for Laplace equations with potential terms on rectangular networks which plays a role as a forward problem. Then we solve an inverse problem to develop an algorithm to locate the node where the extraordinary current flows on it at most four times of measurements of potential and current on its boundary.

• Asia Marketing Journal
• /
• v.24 no.4
• /
• pp.169-177
• /
• 2023

In the current study, we explore how women decide whether to accept or reject a potential match offered by a dating app (Tinder). Specifically, we were trying to identify overlying factors that influence the decision and understand how women make a judgment based on limited cues provided by a Tinder profile. Women largely base their decision on the perceived attractiveness and character of the potential match. The findings suggest that attractiveness is highly subjective, with no universal rules that can be quantified; thus, it is hard to predict acceptance of the potential match. There are however factors that contribute significantly to profile rejection, such as a big age difference and the inability to clearly see the face of the person.

• Tribology and Lubricants
• /
• v.33 no.4
• /
• pp.153-167
• /
• 2017

The aim of this study is to find the change in trend in the eccentricities of two journal bearings supporting the crankshaft of a single cylinder engine and the degree of misalignment of the shaft. We analyze the change in oil film thickness considering the wear scar under mixed-elasto-hydrodynamic lubrication regime at potential wear regions. For this, we first calculate the central eccentricities of the two journal bearings by using the mobility method. Then we calculate the outer end eccentricity by using the geometry of the bearings. Further, the tilting angle and degree of misalignment of the shaft are calculated by using the eccentricities of the two bearings. We show that the eccentricity of bearing #1, on which higher load is applied, increases at the beginning of the start-up cycle and during the coast-down cycle. However, the eccentricity of bearing #2, on which lower load is applied, decreases at the beginning of the start-up cycle and increases during the coast-down cycle. From the results of the analysis of oil film thickness, we show that the mixed-elasto-hydrodynamic lubrication regime for a misaligned shaft is at the initial stages of the start-up cycle for both bearing #1 and #2 and at the final stage of the coast-down cycle for only bearing #1.