• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.71-77
• /
• 2015

A fluidized biofilter was filled with Pseudomonas sp. and Bacillus cereus/thuringiensis-fixed waste-tire crumb media and was run to treat authentic textile-dyeing wastewater mixed with alkaline polyester-weight-reducing wastewater. As a result, its removal efficiency of $COD_{Cr}$ and color were 75~80% and 67%, respectively. In addition, upon constructing hybrid-recirculating system composed of the fluidized biofilter and a 450 W-UV/photocatalytic reactor, only fluidized biofilter was run bypassing UV/photocatalytic reactor at stage I. Subsequently, the hybrid system was continuously run at stage II-i, ii and iii. At stage II-i, the total removal efficiency of $COD_{Cr}$ was enhanced to be 80~85%, compared to 75% at stage I, owing to 20~30% removal efficiency of the UV/photocatalytic reactor. However, at stage II-i, the total removal efficiency of color was enhanced to be 65~70%, compared to 45~65% at stage I, even though the removal efficiency of the UV/photocatalytic reactor was tantamount to merely 0~5%. As far as the removal efficiency of fluidized biofilter of the hybrid-recirculating system is concerned, its removal efficiency of color was enhanced by the synergy effect of the hybrid-recirculating system unlike $COD_{Cr}$. Besides, despite of the increase of hybrid-recirculating system-recycle ratio, the deactivation of photo-catalytic activity was scarcely observed to eliminate the color while its irreversible deactivation was observed to eliminate $COD_{Cr}$.

• Journal of the Korea Furniture Society
• /
• v.24 no.4
• /
• pp.408-415
• /
• 2013

In order to evaluate a feasibility of industrial art use of veneer such as cylindrical laminated veneer lumber, the veneers of 4 species of Korean pine, radiata pine, yellow poplar and Japanese cypress were natural dye-colored and clear finished. Natural dyes were red color originated from sappanwood, blue color from polygonum indigo, and yellow color from Amur cork tree and gardenia. the clear coats of crack seal clear and UV protection oil were applied on the dyed veneer. The dyeing and finishing characteristics through fading test were summarized as follows; In non-dyed and non-finished Korean pine veneer, lightness was decreased and yellow and red hues increased after fading test. In natural dyed- and finished-veneer, color difference of gardenia-mixed Amur cork tree was generally highest, and that of polygonum indigo was lowest. Compared to non-treatment of veneers of Korean pine and yellow poplar, color difference decreasing effect by finishing was shown in crack seal clear and UV protection oil. In addition, UV protection oil was more favorable than crack seal clear with more decreased color difference. In result, maximum values of color difference after fading for 8 days were recorded about 16 to 20, which are remarked 'very much' of 12.1 or more when reviewing with 'National bureau of standards unit in USA'.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1252-1261
• /
• 2007

The purpose of this study was to grasp the utilization of traditional Korean Patterns used for fashion cultural products. To achieve this purpose, this study examined the range of fashion cultural products through literature review, previous researches, and market surveys and analyzed the situation of fashion cultural products and the kinds, expression methods, expression techniques, and repeat styles of utilized patterns. The analysis results are as follows. First, in the use of traditional pattern, the most frequently-used fashion cultural products were small and inexpensive accessories, followed by fashion apparel, miscellaneous goods, and living cultural goods. Second, the most frequently-used traditional patterns were plant patterns, especially flower patterns. The next frequently-used ones were mixed patterns, especially in the mixture of flower and letter patterns, and $cloisonn\'{e}$ and flower patterns. The next frequently-used traditional patterns were animal patterns(especially butterfly patterns), followed by geometric patterns, lucky omen patterns, and letter patterns. In the expression methods of used patterns, most products except handicrafts preferred simplified patterns to real patterns. Finally, in the expression techniques of traditional patterns, the most frequently used technique was traditional embroidery, followed by the use of weaving fabrics such as fine gauze and brocade which are used for Hanbok. Also, transfer dyeing which is one of printing techniques, DTP(digital textiles printing), a mixed technique which adds embroidery to weaving fabrics, hand-painting, and a gilt technique were used. The results of this study suggest that most fashion cultural products except few designers' works attached weight to some specified patterns and expression techniques regardless of the characteristics of products since there is little understanding of a variety of patterns and are few researches and development on expression techniques.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.6
• /
• pp.827-836
• /
• 2013

Indigotin, indirubin, berberine, palmatine, alizarin, and purpurin are major pigments of indigo plant, Phellodendron bark, and madder. The six pigments were examined using the HPLC-DAD-MS instrument for the purpose of the simultaneous detection of the pigments in a single sample run. The HPLC-DAD-MS method examined the individual pigment solutions in DMSO, a solution containing 6 pigments, and the DMSO extract of the silk dyed with a dye solution of 5 pigments excluding indirubin. The retention times of the HPLC chromatograms, ${\lambda}_{max}$ of the uv-vis absorption bands in the DAD analyses, and the molecular ions detected for the compound peaks in the MSD analyses were consistent throughout the analyses of individual pigment solutions, mixed pigment solutions, and dye extracted from silk dyeing. The developed instrumental method of the simultaneous detection of six pigments can identify dye in an exhumed textile if the textile is dyed using any one (or multiple) pigments of indigo, Phellodendron bark, or madder plant.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.1
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.25-31
• /
• 2000

In order to decolorize disperse dyes by using biological treatment process, a strain which has potential ability to degrade disperse dyes was isolated from natural system. To increase the removal efficiency of decolorization in the aqueous solutions, the optimal condition of decolorization by this strain was investigated, and continuous plant test was also developed. The optimal culture conditions of temperature and pH were found to be 4$0^{\circ}C$ and 8.5~9, respectively. When yeast extract was mixed with polypeptone at the mixing ratio of 1:1 as a nitrogen source, decolorization efficiency was highest(93%) among the nitrogen sources. The strain to be screened was excellent to adjust to pH, and it seems to be have ability to control pH needed to growth. The optimal culture conditions in concentration of $MgSO_4\cdot{7H}_2O$ and $KH_2PO_4$ were 0.1%(w/v) and 0.2%(w/v). The result of continuous plant process using wastewater was as following : $COD_{Mn}$ removal efficiency was over than 50%, and this strain was very excellent in decolorization-efficiency for the wastewater of Taegu dyeing complex.

• Journal of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.218-223
• /
• 1983

Triazinyl reactive dye containing two different chromophore was synthesized by using trifluoro-s-triazine as reactive component. The yield of this dye was 72% and its colour was yellowish red as a mixed shade. The hydrolysis rate and dyeing properties of this dye were studied and compared with monochlorotriazinyl reactive dye. It was found that monofluorotriazinyl reactive dye showed much higher hydrolysis rate than monochlorotriazinyl reactive dye.

• Journal of Bio-Environment Control
• /
• v.16 no.2
• /
• pp.108-114
• /
• 2007

This study was conducted to clarify the effects of the different mixing ratios of substrate mixtures based on peat moss and the concentration of nutrient solution on the growth of tomato (Lycopersicon esculentum Mill.) seedlings. Substrates such as peat moss, rice hull, carbonized rice hull, decomposed sawdust, perlite and granular rock wool were mixed and used. The concentration of nutrient solution were adjusted to EC $0.5{\sim}1.5mS/cm$. The volumetric moisture contents became higher as peat moss mixed were much more. Total porosities in all substrate mixtures were over 80%, and pH in substrate mixtures became lower as the volume of peat moss mixed higher. Mixing ratios of substrates suitable for the production of tomato seedlings with the higher quality were peat moss:rice hull:carbonized rice hull:decomposed sawdust:perlite=25:10:25:20:20(v/v). The plant growth was not significant among the different substrate mixtures. However, plant growth such as plant height, leaf area, and total dry weight became significantly increased as EC increasing.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.433-439
• /
• 2005

The copolymers were prepared by the emulsion copolymerization of fluoroalky lacrylate-stearylacrylate-m-isopropenyl-${\alpha},\;{\alpha}'$-dimethylbenzyl isocyanate (TMI) in order to obtain water repellent polymers. The respective copolymerization rates of the three monomers considerably depended upon the use of the nonionic emulsifier and the nonionic-cationic mixed emusifier, and the optimum conditions were obtained. The particle sizes of the copolymers were in the range of 105 to 222nm. The particle sizes of the copolymers prepared by the use of the mixed emulsifiers were smaller than those of the copolymers prepared by the use of the nonionic emulsifier. The reactions of both TMI-N-methyl acetamide and TMI-cellobiose did not take place. However, the reaction of TMI-n-butylamine occurred. The water contact angles before and after washing three times for nylon and poly(ethylene terephthalate) (PET) fabrics coated with the copolymer prepared by the use of mixed emulsifier were about $139^{\circ}\;and\;133^{\circ}$ Therefore, the copolymer showed good durable repellency for nylon and PET.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.429-436
• /
• 2010

Dyestuffs extracted from fifteen kinds of natural dyeing materials were researched on their antimicrobial performance against 3 kinds of bacteria and 2 kinds of fungi in order to develop conservation/storage materials of traditional and natural dyed papers. The three types of mordants were evaluated by using the same method and then mixed with the dyestuffs to research their antimicrobial performance. With those results, dyed paper was made by mixing mordants with 9 kinds of dyestuffs with excellent antimicrobial performance. Among the dyed papers, Cotinus coggygria, Coptis chinensis, Phellodendri amurense, Rhus javanica and Acer ginnala multiple mordant papers were found to have an antibacterial quality against fungi, while, in the insect repellent experiment using termites, Coptis chinensis and Phellodendri amurense dyed papers were found to have insect repellent qualities. Also, with regard to the research result about the affect of dyeing paper on other materials like metal, Coptis chinensis have relatively stable qualities. Also, the three types of dyeed paper by Cotinus coggygria, Coptis chinensis and Phellodendri amurense, were found to have a tendency to remove harmful gases. Not only can these dyed papers be used for making storage box for cultural properties to prevent various organic artifacts from bio-damaging, but they can also be utilized as functional finishing materials in various spaces.