• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.178-179
• /
• 2017

In this study, the fundamental properties of cement mortar in relation to the change of the replacement ratio of the RA(Reject-Ash) were analyzed by mixing RA to the mixed aggregate consisting of poorly graded fine rock aggregate and marine aggregate for quality improvement. It was found that replacing 5% of the mixed aggregate with RA could improve the quality of the aggregate to the degree of fine rock aggregates.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.22-23
• /
• 2016

This study analyzes the properties of foam according to the concentration of vegetable foaming agent that is used in traditional and mixed foaming agent of developing stage, and confirms how the foams influence foamed concrete by searching for properties of foamed concrete according to replacing ratio of vegetable foaming agent and mixed foaming agent. This is for the purpose of providing basic data for the use of foamed concrete through improvement on the problem such as unstability, falling in fluidity and the strength of existed foaming agent.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.5-6
• /
• 2017

Ultra high-strength concrete can prevent spalling by mixed ratio of PP and NY fiber. However, there is a lack of research on the deterioration of strength due to changes in mechanical properties after spalling prevention. In this study, the effect of high temperature on the mechanical properties of 150MPa concrete mixed with PP and NY fiber was evaluated. As a result, mixing PP and NY fiber is judge to be little effect on the mechanical properties of the 150MPa concrete at high temperature.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.37-38
• /
• 2016

In this study, it evaluate the coarse aggregate mixed effect to impact resistance performance of the fiber reinforced cement-based material. The type of fiber is Hooked-ended steel fiber, and mixed 1vol.% in concrete and cement composites. The impact experiment was conducted by using a spherical shape projectile diameter of 25mm to 170m/s speed and Impact resistance performance was evaluated by measuring the fracture grade, fracture diameter and depth.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.57-60
• /
• 2003

Generally, normal concrete has the disadvantages of low tensile strength, low ductility and volume instability. To improve its performance, fiber reinforced cimentitious composite(FRCC) have been development. These composites are composed of cement, sand, water, a small amount of admixtures, and an optimal amount of fiber like synthetic fiber and steel fiber. This research investigates influence of sand, hybrid fiber and fiber volume fraction, and reports the test results of mechanical properties, fracture behavior and failure pattern of the FRCC. Our experiment was observed that sand mixed FRCC has lower compressive strength and higher bending strength than no sand mixed FRCC, and more steel fiber mixed FRCC has higher compressive strength and bending strength. Hybrid FRCC of steel and polypropylene had superior properties than FRCC of polypropylene only in same fiber volume fraction.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.44-45
• /
• 2015

Although the carbonation problem of high-volume slag concrete has been solved by the mixed use of emulsified refine cooling oil as the pilot study, there was an instance of securing air quantity and frost resistance followed by the use of Expancel due to the problem of having vulnerability in frost resistance in result as the air quantity has not been secured. But due to the problem of Expancel not being economical, air quantity and frost resistance of high-volume slag concrete mixed with ERCO are attempted to be secured using micro bubble that can remain in the water for a long time as a relatively economical and very microscopic bubble.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.33-34
• /
• 2018

As a result of measuring the compressive strength and semi-adiabatic temperature rise of the mixed mortar, it was confirmed that the mortar mixed with the hydration heat reducing material is effective. On the other hand, the compressive strength showed similar strength to that of moderate heat Portland cement until the age 7 days, but after that, the tendency of the strength development to be delayed was confirmed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.79-80
• /
• 2019

This study was intended to examine the possibility of reducing hydration heat by FA substitution and combination of slag (CGS) from coal gasification power generation (IGCC) with mixed aggregate for concrete. The analysis results showed good results if liquidity increases as the ratio of CGS increases, air volume decreases, and compressive strength is mixed up to 25% in the residual aggregate. The results showed that the heat of hydration was reduced compared to plain due to the boron content of CGS as the CGS substitution rate increased, but it was larger due to the combination with FA substitution. It was found that the heat of hydration was reduced.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.192-193
• /
• 2022

In this study, concrete durability was reviewed before CGS, a by-product generated from IGCC, was used as a fine aggregate for concrete. The characteristics of concrete and effect on carbonization according to the type of pre-mixed cement and the CGS substitution rate were analyzed. As a result of the analysis, the depth of carbonation according to the pre-mixed cement types increased by up to 52%, and the carbonation resistance tended to be similar overall when CGS was used as a fine aggregate.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.259-260
• /
• 2022

In this study, as part of a study to solve the problem of aggregate supply and demand, blast furnace slag fine aggregate and ferronickel slag fine aggregate were used as substitutes for natural fine aggregate, and a bioinspired polymer, a catechol-functionalized chitosan, was used instead of the mixing water.