• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.3
• /
• pp.1-7
• /
• 2009

In order to use recycled aggregate as pavement base or subbase materials, the US and many other European countries have started research since the early 1980s. Korea also had a recycle idea as a plan for the vast amount of construction wastes due to the downtown renovation in the 1990s, but was not put into practical use. After the resources saving and recycle expedition law in 1994, wastes from construction sites that have more than a certain amount of construction budget were recycled as pavement base and subbase materials, but now, researches are being conducted to use them as paving materials. The use of construction wastes is meaningful in many ways. It helps the natural conservation and aggregate consumption, and also improves pavement performance. This research presents a development of cold-mixed reclaimed asphalt pavement materials using recycled aggregates.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2021

In this study, a real-sized experimental equipment (pilot plant) was built at the site based on the preliminary research data to develop a movable separator for the mixed construction waste that can be implemented in agricultural areas to review its feasibility through the evaluation of its separation efficiency by waste types. The final construction of the movable separator and experimental results of the separation efficiency are summarized as follows. 1) The separation performance according to the blade type was the best for the combustible wastes either with 26 numbers of L-type blades and 32 numbers of pin type blades. As far as combination of blade types, when the L-type and pin-type were combined, the best separation efficiency was achieved. 2) The separation efficiency for waste wood by the conveyor type and angle of inclination (slope) of the trommel was the best when the conveyor had ribs of seagull shape with the angle of inclination 45°. 3) The separation efficiencies by process showed that 65.9% was separated as inorganic demolition wastes, 18.2% as waste woods, and 16.0% as combustible wastes at conveyor speed of 2-3 rpm, and the error rate was the least from the waste types generated in the dismantle site.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1328-1333
• /
• 2009

On the construction area, Information Technology (IT) has been a considerably significant part over the all phases; plan, design, procurement, construction and post-construction. For example, CALS, CITIC, PMIS, FMS, BIM and etc, designed and applied for managing construction industry are already valuable to improve on the Construction Management (CM). To develop these management methods, lots of mixed-systems are studied and progressed so far. In this paper, more useful and efficient system modules are proposed through investigating PMIS cases implemented, especially medical projects, to improve into FMS on the post-construction. Because most PMIS on the construction phase is used not to continue as FMS, considerable cost and time is consumed to rebuild the system, even both systems have common modules. As these wastes are faced to design systems, the important modules on PMIS are derived and analyzed to apply to FMS to save time and cost on CM.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.1
• /
• pp.53-59
• /
• 2016

This study was conducted by the slump test and the consistency test of the fiber mixed soil which is soil reinforced with fiber as a reinforced material to investigate and estimate the difficulty degree of work and the proper water content. So I would like to present the fundamental data that establishes the work standard of the fiber mixed soil. In conclusion, in this study the slump value of the fiber mixed soil increases over-all according to the increase of the water content although it has a little difference of the increase range and it is smaller than one of the soil. It is estimated that the aggregating and throwing work of the fiber mixed soil would be fine when it has the about 25 % water content and the wall and floor plastering work is the about 30 % ~ 35 % and the flowing and pouring work is the about 40 % water content as well as the mold compacting work is the about 20 %. There is no decreasing of the workability when the soil is reinforced by the fiber because the workability characteristics of the fiber mixed soil is similar to the one of the soil. Therefore, It is estimated that using the fiber as a reinforced material of soil would be appropriate for the construction.

• Journal of the Korean housing association
• /
• v.20 no.2
• /
• pp.11-18
• /
• 2009

After 2004, as the community mixed-support facility in Japan was admitted as a private business of public facilities based on the Special Law for Urban Regeneration, the community mixed-support facilities in Japan are developed into various types with the view of the urban regeneration and urban renewal, more different point of view, and a tendency of establishment of the community facility has been considerably changed for the past twenty years. The reasons of the change are the social demand for the reformation of facility and the modification of subsidy constitution according to the establishment of equal facility. Some examples of that are the construction of lifelong education community and the change into a equivalent society between male and female and the adjusting to the aging and the welfare society and the social situation of more consumption recently, and in order to emerge from former building system, new facilities related to the contents are being expanded. The complex of the community mixed-support facility has an advantage in that it supplies the services for the complex of the community mixed-support facility, constitutes the communal character and the sense of solidarity among residents and can lead the development of region through the exchange of regional information. Through the Japanese community mixed-support facility which has many cases of it, this study would recognize the suggestion, the feature of it and examine the complex types.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.9
• /
• pp.5-12
• /
• 2014

Anaerobic digestion was investigated for the stabilization of sludge, decrease of volatile solids, production of biogas for wastewater sludge. In this study, total solids and volatile solids, elemental analysis were conducted to determine characteristics of various types of sludges and investigate the feasibility of biogas production of Municipal Wastewater Sludge (MWS), Industrial Wastewater Sludge (IWS), mixed sludge (Mix), and Municipal Wastewater Sludg Cake (MWSC). Total solids, volatile solids, and C/N ratio were determined in the range of 11.2~20.6 %, 62.1~83.1 % of TS and 4.96~8.33 %. Using the biochemical methane potential (BMP test), mixed sludge and wastewater sludge finished the methane production within approximately 20 day and 16~17 day. Sludge cake finished within 10 day. Mixed sludge produced 395.5 mL $CH_4$ per g of Volatile Solid (VS) and resulted in the highest methane production. For carbon dioxide production, five sludges had similar value of accumulated carbon dioxide production except for sludge cake.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.36-37
• /
• 2014

Construction work in island areas requires the materials to be transported by ship and plane, and it causes an increase in the construction costs. In addition, the construction work near marine zones may produce the marine pollution due to the harmful substances in the cement. Recently, nature-friendly construction materials are increasingly used, and there is a need to select and develop appropriate construction materials. In this study, the compressive strength, tensile strength, flow and chloride content of the mortar mixed with cement and muddy tidal flat were measured to reduce the amount of cement by applying the natural materials, muddy tidal flat and marine sand, and the results were provided as the basic construction material data.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.427-434
• /
• 2017

The generation of construction waste can be divided into a decommissioning phase and a new construction phase, and most of the waste is generated at the decommissioning stage. However, recently, domestic new construction construction has expanded to 150 trillion yards per year, so construction work is increasing rapidly. Especially, as the size of the construction work with much waste of construction waste exceeds 100 trillion, the management of the amount of construction waste in the new construction site is required. Unlike the dismantling work site, the new construction site can separate waste generated by each property, and relatively low foreign matter content is generated. The purpose of this study was to investigate the amount of construction waste generated by new construction sites and to calculate the unit amount of construction waste based on this. In addition, since the existing unit cost is centered on concrete and mixed waste, we set the basic unit by setting synthetic resin, waste wood, and waste board as additional items. The basic unit survey was carried out to investigate the wastes according to the characteristics of each construction period. As a result of the survey, the new construction site showed that most wastes were discharged in the first 30% and after 70% of the process, and the ratio of mixed construction waste was as high as 45%. As a result of this study, it was found that about twice as much waste was produced as compared with the conventional standard product.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.28-39
• /
• 2016

The multi-mixed complex medical care facility consisting of mainly hospital and other associated facilities such as retail, office, accommodation, healthcare services, and so on, is currently recognized as a new segment in the real estate market. This study intends to identify the customer choice criteria for the development of multi-mixed complex medical care facility. Based on literature review and expert consultation, the 3 criteria with 12 sub-criteria for customer choice have been defined. And the AHP methodology has been implemented for the development of relative weight of those criteria depending on the type of facility including 'medical facility', 'supporting facility', 'healthcare service facility' and 'other ancillary facility'. Research findings indicated the implication for the optimal combination of facility development based on the customer choice criteria controlled by facility. Accordingly, this research intends to provide the guidance toward the development of multi-mixed complex medical care facility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.660-668
• /
• 2018

The main object of this study was to find a way to operate the marker for simulating a virtual construction using a MR(mixed reality) device. The secondary object was to find a way to extract the form-data from BIM data, and to represent the virtual object by the MR device. A tiny error of scale causes large errors of length because the architectural objects are very large. The scale was affected by the way that the camera of the MR device recognizes the marker. The method of installing and operating the marker causes length errors in the virtual object in the MR system. The experimental results showed that the error factor of the Virtual object's length was 0.47%. In addition, the distance between the markers can be decided through the results of an experiment for the multi-marker tracking system. The minimum distance between markers should be more than 5 m, and the error of length was approximately 23mm. If the represented virtual object must be less than 20mm in error, the particular mark should be installed within a 5 m radius of it. Based on this research, it is expected that utilization of the MR device will increase for the application of virtual construction simulations to construction sites.