• 대한수학회논문집
• /
• 제27권2호
• /
• pp.243-255
• /
• 2012

In this paper, we deal with an inverse problem for electrical resistor networks to detect the location of nodes where an extraordinary currents ow into or out of the nodes proportional to the potentials on them. To achieve the goal, we solve a special type of mixed boundary value problem for Laplace equations with potential terms on rectangular networks which plays a role as a forward problem. Then we solve an inverse problem to develop an algorithm to locate the node where the extraordinary current flows on it at most four times of measurements of potential and current on its boundary.

• 대한지리학회지
• /
• 제49권3호
• /
• pp.423-437
• /
• 2014

구획화는 인간 활동에 영향을 미치는 새로운 지역적 틀을 만들어내는 공간 의사결정 과정이다. 그러나 구역 내 포함되어 있는 자연적 장애물은 재조직화된 구역 내에서 이루어지는 인간 활동의 효율성을 떨어뜨릴 수 있다. 이는 구획화 과정에서 경계의 특성, 즉 고도와 같은 자연적 특성, 상호작용과 같은 관계적 특성을 고려할 필요가 있음을 의미한다. 본 연구의 목적은 이러한 경계 특성을 반영하는 새로운 구획모델을 고안하는 것이다. 경계를 '결합' 혹은 '분리'와 같이 이분법적으로 간주하기 보다는 인접한 두 공간 단위 사이의 길이, 고도 편차, 상호작용과 같은 여러 경계 특성을 바탕으로 평가된 결합의 가능성을 나타내는 연속적 함수로 간주하고 목적함수 형태로 모델에 반영한다. 모델은 인구, 면적과 같은 수요 균형을 부여하는 제약조건뿐만 아니라 명시적인 연접성 제약조건을 갖는다. 경계 속성을 자연적 특성과 관계적 특성으로 구분하고, 이와 관련된 다양한 요인들에 대하여 적합도 분석을 수행하여 인접한 두 기본 공간 단위 사이의 결합 가능성을 평가한다. 행정구역 재설정문제에 고안된 모델 및 경계 특성 분석 방법을 적용한다. 분석 결과는 혼합정수계획법의 틀로 다양한 경계 특성을 고려한 구획화가 가능함을 보여준다.

• Journal of applied mathematics & informatics
• /
• 제30권3_4호
• /
• pp.477-488
• /
• 2012

The convergence rate of a numerical procedure based on Schwarz Alternating Method(SAM) for solving elliptic boundary value problems depends on the selection of the interface conditions applied on the interior boundaries of the overlapping subdomains. It has been observed that the mixed interface condition, controlled by a parameter, can optimize SAM's convergence rate. In [8], one introduced the two-layer multi-parameterized SAM and determined the optimal values of the multi-parameters to produce the best convergence rate for one-dimensional elliptic boundary value problems. In this paper, we present a method which utilizes the one-dimensional result to get the optimal convergence rate for the two-dimensional problem.

• Structural Engineering and Mechanics
• /
• 제61권3호
• /
• pp.381-387
• /
• 2017

In this paper we investigate the theory of micropolar thermoelastic bodies whose micro-particles possess microtemperatures. We transform the mixed initial boundary value problem into a temporally evolutionary equation on a Hilbert space and after that we prove the existence and uniqueness of the solution. We also approach the study of the continuous dependence of solution upon initial data and loads.

• Korean Journal of Mathematics
• /
• 제6권1호
• /
• pp.27-46
• /
• 1998

We are concerned with an optimal control problem governed by a Poisson equation in which body force acts like a control parameter. The cost functional to be optimized is taken to represent the error from the desired observation and the cost due to the control. We recast the problem into the mixed formulation to take advantage of the minimax principle for the duality method. The existence of a saddle point for the Lagrangian shall be shown and the optimality system will be derived therein. Finally, to attain an optimal control, we combine the optimality system with an operational technique. By achieving the gradient of the cost functional, a convergent algorithm based on the projected gradient method is established.

• 대한조선학회논문집
• /
• 제56권1호
• /
• pp.11-22
• /
• 2019

In this paper, a Rankine source method is applied and validated to analyze the hydrodynamic response of a three-dimensional floating structure in the frequency domain. The boundary value problems for radiation and diffraction problem are solved by using a desingularized indirect boundary integral equation method (DIBIEM). The DIBIEM is simpler and faster than conventional methods based on the numerical surface integration of Green's function because the singularities of Green's function are located outside of fluid regions. In case of floating structure with complex geometry, it is difficult to desingularize the singularities of Green's function consistently. Therefore a mixed approach is carried out in this study. The mixed approach is partially desingularized except singularities of the body. Wave drift loads are calculated by the middle-field formulation method that is mathematically simple and has fast convergence. In order to validate the accuracy of the developed program, various numerical simulations are carried out and these results are analyzed and compared with previously published calculations and experiments.

• Journal of Mechanical Science and Technology
• /
• 제14권9호
• /
• pp.920-927
• /
• 2000

A multi-layered orthotropic material with a center crack is subjected to an anti-plane shear loading. The problem is formulated as a mixed boundary value problem by using the Fourier integral transform method. This gives a Fredholm integral equation of the second kind. The integral equation is solved numerically and anti-plane shear stress intensity factors are analyzed in terms of the material orthotropy for each layer, number of layers, crack length to layer thickness and the order of the loading polynomial. Also, the case of monolithic and hybrid composites are investigated in terms of the local fiber volume fraction and the global fiber volume fraction.

• Structural Engineering and Mechanics
• /
• 제27권5호
• /
• pp.609-623
• /
• 2007

The problem of a semi-infinite magneto-electro-elastically impermeable mode-III crack in a magneto-electro-elastic material is considered under the action of impact loads. For the case when a pair of concentrated anti-plane shear impacts, electric displacement and magnetic induction impacts are exerted symmetrically on the upper and lower surfaces of the crack, the magneto-electro-elastic field ahead of the crack tip is determined in explicit form. The dynamic intensity factors and dynamic energy density factor are obtained. The method adopted is to reduce the mixed initial-boundary value problem, by using the Laplace and Fourier transforms, into three simultaneous dual integral equations, one of which is converted into an Abel's integral equation and the others into a singular integral equation with Cauchy kernel. Based on the obtained fundamental solutions of point impact loads, the solutions of two kinds of different loading cases are evaluated by integration. For some particular cases, the present results reduce to the previous results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1016-1019
• /
• 2002

This paper deals with a fundamental and classical scattering problem by a finite strip. For the analysis of scattered acoustic field, a “single” integral equation is derived. Firstly, the complexity by considering the effect of the mean flow is alleviated by the introduction of Prandtl-Glauert coordinate and the new dependent variable. Secondly, the difficulty of solving the resultant strongly-coupled integral equations which always appear in this kind of 3-part mixed boundary value problem is solved by observing some good properties of the functions in complex domain and manipulating the equations and variables for the use of those properties. The solution can be obtained asymptotically in terms of gamma function and Whittaker function. One aim of this study is the improvement of methodology for the research using integral equations. The other is the basic understanding of scattering by a finite strip related to the linear cascade model of rotating fan blades.

• 대한기계학회논문집
• /
• 제8권3호
• /
• pp.232-240
• /
• 1984

본 논문에서는 Stern이 제시한 경로적분식을 기본방정식으로 하여 예리한 임 의 노치내각을 가진(크랙의 경우 0˚), 즉 r$^{.lambda.}$ 형태의 특이점을 포함한 모우드-I 및 II 응력확대계수를 위한 특성해 및 보조해를 규정하고 선택모형문제로 예리한 노치 내각을 달리한 대칭 하중의 인장문제와 끝단 전단력하중하의 일단 고정보의 비대칭문 제의 응력확대계수를 기존의 재래식 유한요소법과 결합하여 계산하였다. 또한 각각 의 경우 적분경로 및 요소분할을 달리하여 수치해의 안정성 및 경로 독립성을 검토하 였다.