• 에너지공학
• /
• 제11권4호
• /
• pp.283-290
• /
• 2002

동심환형 곡관의 내벽면에서 일정한 열전달이 있는 경우에 대하여 혼합대류의 유동장 및 열전달계수를 수치적으로 구하였다. 유동장은 주흐름방향으로의 압력과 온도구배가 일정한 완전발달흐름으로 가정하였다. 유동장의 특성을 나타내는 물리적 변수인 반경비는 0.2, 0.5, Grashof수는 8000, 80000 그리고 Dean수는 0-900범위에서 계산을 실시하였다. 반경비, Grashof수, Dean수를 변화시키며 2차유동, 열유속, 마찰비, 열전달계수에 대한 수치해를 구하였다. 마찰비와 Nusselt수는 Dear수의 제곱근에 비례하게 증가됨을 볼 수 있다.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.447-457
• /
• 2018

In this study, a two-dimensional fully nonlinear transient wave numerical tank was developed using a desingularized indirect boundary integral equation method. The desingularized indirect boundary integral equation method is simpler and faster than the conventional boundary element method because special treatment is not required to compute the boundary integral. Numerical simulations were carried out in the time domain using the fourth order Runge-Kutta method. A mixed Eulerian-Lagrangian approach was adapted to reconstruct the free surface at each time step. A numerical damping zone was used to minimize the reflective wave in the downstream region. The interpolating method of a Gaussian radial basis function-type artificial neural network was used to calculate the gradient of the free surface elevation without element connectivity. The desingularized indirect boundary integral equation using an isolated point source and radial basis function has no need for information about the element connectivity and is a meshless method that is numerically more flexible. In order to validate the accuracy of the numerical wave tank based on the desingularized indirect boundary integral equation method and meshless technique, several numerical simulations were carried out. First, a comparison with numerical results according to the type of desingularized source was carried out and confirmed that continuous line sources can be replaced by simply isolated sources. In addition, a propagation simulation of a $2^{nd}$-order Stokes wave was carried out and compared with an analytical solution. Finally, simulations of propagating waves in shallow water and propagating waves over a submerged bar were also carried and compared with published data.

• Ocean Systems Engineering
• /
• 제2권2호
• /
• pp.147-158
• /
• 2012

A time-domain simulation of a land-based Oscillating Water Column (OWC) with various irregular waves as a form of PM spectrum is performed by using a two-dimensional fully nonlinear numerical wave tank (NWT) based on the potential theory, mixed Eulerian-Lagrangian (MEL) approach, and boundary element method. The nonlinear free-surface condition inside the OWC chamber was specially devised to describe both the pneumatic effect of the time-varying pressure and the viscous energy loss due to water column motions. The quadratic models for pneumatic pressure and viscous loss are applied to the air and free surface inside the chamber, and their numerical results are compared with those with equivalent linear ones. Various wave spectra are applied to the OWC system to predict the efficiency of wave-energy take-off for various wave conditions. The cases of regular and irregular waves are also compared.

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.1020-1028
• /
• 2012

This work compares various models for geminate reversible diffusion influenced reactions. The commonly utilized contact reactivity model (an extension of the Collins-Kimball radiation boundary condition) is augmented here by a volume reactivity model, which extends the celebrated Feynman-Kac equation for irreversible depletion within a reaction sphere. We obtain the exact analytic solution in Laplace space for an initially bound pair, which can dissociate, diffuse or undergo "sticky" recombination. We show that the same expression for the binding probability holds also for "mixed" reaction products. Two different derivations are pursued, yielding seemingly different expressions, which nevertheless coincide numerically. These binding probabilities and their Laplace transforms are compared graphically with those from the contact reactivity model and a previously suggested coarse grained approximation. Mathematically, all these Laplace transforms conform to a single generic equation, in which different reactionless Green's functions, g(s), are incorporated. In most of parameter space the sensitivity to g(s) is not large, so that the binding probabilities for the volume and contact reactivity models are rather similar.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.56-64
• /
• 2000

A friction force measurement system using the floating liner method was developed to study the frictional behavior of piston rings. The measurement system was carefully designed to control the effect of the piston secondary motion and the temperature of cylinder wall and oil. The friction force between the barrel shaped piston ring and the cylinder liner, was measured under the condition of flooded oil supply. The measured friction forces were classified into five frictional modes with regard to the combination of predominant lubrication regimes(boundary, mixed and hydrodynamic lubrication) and stroke regions(midstroke and dead centers). The modes could be identified on the Stribeck diagram of the friction coefficients and the dimensionless number of ㎼/p, where the friction coefficients are evaluated at near the midstroke and dead centers.

• 한국습지학회지
• /
• 제5권1호
• /
• pp.67-78
• /
• 2003

The unsteady 2D convection and diffusion equation is solved numerically for the real-time simulation of suspended load propagation. The streamlined upwind scheme efficiently reduces numerical oscillations due to the high Peclet number in the convection dominant flow. By using the mixed boundary condition to express the external source terms or externally induced suspended load as a function of time in the algorithm, the model is capable of handling not only continuous load cases but also non-continuous suspended load influx. The suspended load transport modelwas verified using a case study for which an analytical exact solution is available and was applied to the real-time simulation of a suspended load influx case on the Mississippi River. The model algorithm can provide a framework upon which water quality as well as contaminant transport models can be built.

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1275-1281
• /
• 2001

Aqueous polymer solutions are known to have small pressure reduction. Paraffin slurries are known to have high thermal capacity. Paraffin particles are mixed into an aqueous polymer solution to make a new heat transfer fluid having high thermal capacity but low pressure reduction. The heat transfer characteristics of the new slurry was tested in a circular tube having a constant heat transfer boundary condition. The new slurry was found to have high Nusselt numbers as well as high thermal capacity and low pressure reduction in the laminar flow. The trends of the Nusselt numbers along the heating test section were studied for various heating conditions.

• 한국농공학회논문집
• /
• 제61권6호
• /
• pp.21-30
• /
• 2019

Livestock odor is comprised of mixed type of odorous compounds. Among these, ammonia ($NH_3$) and hydrogen sulfide ($H_2S$) are the two known major odor causing substances. Because high odor concentration reduces productivity of livestock and causes damage to the surrounding communities, quantitative analysis is needed to manage the odor inside and outside the livestock facilities. It is also necessary to evaluate odor dispersion according to the distance between the receptors taking into account the influence of odor source and weather condition. Therefore, in this study, we tried to evaluate the internal environment and odor dispersion from experimental pig house considering weather conditions. An experimental farm was specifically selected to eliminate the interference of odors generated by adjacent farms. $NH_3$ and complex odor were quantitatively analyzed using a gas detector and air dilution sensory method. The concentration of $NH_3$ and complex odor in pig house showed a distinct concentration difference according to the cleaning and ventilation conditions. $NH_3$ concentration and complex odor was lower than emission standard in the pig house and at the site boundary. The average $NH_3$ concentration (P1~P3) and the $NH_3$ concentration at the site boundary (S1) were strongly correlated with R=0.77. While the correlation for complex odor inside and at the site boundary had R=0.52. The correlation coefficient between $NH_3$ and the complex odor was 0.80.

• 터널과지하공간
• /
• 제31권6호
• /
• pp.549-560
• /
• 2021

쉴드 TBM(Tunnel Boring Machine) 굴진 시 TBM에 작용하는 커터헤드 토크, 추력, 챔버압, 상향력 등은 TBM의 굴진성능을 결정하는 데 매우 중요한 요소들이다. 그러나 균질한 지반 조건에 비해 복합지반을 굴진할 때 TBM에 작용하는 힘들은 그 경향이 달라 TBM 굴진성능을 저해할 수 있다. 따라서 본 연구에서는 복합지반 굴진이 TBM에 작용하는 토크, 추력, 챔버압, 상향력에 미치는 영향을 수치해석적으로 모사하고자 하였다. 해석 모델은 개별요소법(DEM, discrete element method)과 유한차분법(FDM, finite difference method)을 연계하는 방안을 적용한 TBM 굴진 모델을 사용하였다. 본 연구에서는 상부 화강풍화토와 하부 풍화암으로 구성된 복합지반을 굴진하는 것을 가정하여 굴진을 모사하였으며, 복합지반 경계면의 위치, 경사에 따라 TBM에 작용하는 힘에 대한 영향을 해석적으로 분석하였다.

• 대한기계학회논문집
• /
• 제16권12호
• /
• pp.2226-2240
• /
• 1992

본 연구에서는 이방성체에 대한 구체적인 코스틱스 실험법을 확립하기 위하여 다음과 같은 연구를 수행 하였다. 첫째, 이방성체에 대한 코스틱스상 및 초기곡선의 사상방정식을 기하광학 및 Sih의 응력장을 이용하여 구하고, 이 식에 의한 이론상을 여러가지 경계조건하에서 컴퓨터 그래픽 하여 유도한 사상방정식의 타당성을 검토 하 였다.둘째, 본 논문에서 개발한 두 가지 종류의 직교이방성체를 사용하여 실험을 수행하고 실험에 의한 코스틱스상을 이론상과 비교, 검토 하였다.셋째, 이방성체의 코스틱스상으로부터 응력확대계수를 구하는 방법을 제시하고 이 방법을 실제 시편에 적용하여 신뢰 할수 있는 결과를 얻는 초기곡선의 범위를 결정 하였다. 그리고 이 범위에서 구한 응력확대 계수 값을 경계요소법을 이용한 변위외삽법에 의한 결과와 비 교함으로써 본 논문에서 제시하는 방법이 이방성체의 응력확대계수를 구하는 한 방법 으로 유효하게 사용될 수 있음을 밝혔다.