DOI QR코드

DOI QR Code

Development and Application of Two-Dimensional Numerical Tank using Desingularized Indirect Boundary Integral Equation Method

비특이화 간접경계적분방정식방법을 이용한 2차원 수치수조 개발 및 적용

  • Oh, Seunghoon (Korea Research Institute of Ships and Ocean Engineering) ;
  • Cho, Seok-kyu (Korea Research Institute of Ships and Ocean Engineering) ;
  • Jung, Dongho (Korea Research Institute of Ships and Ocean Engineering) ;
  • Sung, Hong Gun (Korea Research Institute of Ships and Ocean Engineering)
  • 오승훈 (한국해양과학기술원 부설 선박해양플랜트연구소) ;
  • 조석규 (한국해양과학기술원 부설 선박해양플랜트연구소) ;
  • 정동호 (한국해양과학기술원 부설 선박해양플랜트연구소) ;
  • 성홍근 (한국해양과학기술원 부설 선박해양플랜트연구소)
  • Received : 2018.08.06
  • Accepted : 2018.11.19
  • Published : 2018.12.31

Abstract

In this study, a two-dimensional fully nonlinear transient wave numerical tank was developed using a desingularized indirect boundary integral equation method. The desingularized indirect boundary integral equation method is simpler and faster than the conventional boundary element method because special treatment is not required to compute the boundary integral. Numerical simulations were carried out in the time domain using the fourth order Runge-Kutta method. A mixed Eulerian-Lagrangian approach was adapted to reconstruct the free surface at each time step. A numerical damping zone was used to minimize the reflective wave in the downstream region. The interpolating method of a Gaussian radial basis function-type artificial neural network was used to calculate the gradient of the free surface elevation without element connectivity. The desingularized indirect boundary integral equation using an isolated point source and radial basis function has no need for information about the element connectivity and is a meshless method that is numerically more flexible. In order to validate the accuracy of the numerical wave tank based on the desingularized indirect boundary integral equation method and meshless technique, several numerical simulations were carried out. First, a comparison with numerical results according to the type of desingularized source was carried out and confirmed that continuous line sources can be replaced by simply isolated sources. In addition, a propagation simulation of a $2^{nd}$-order Stokes wave was carried out and compared with an analytical solution. Finally, simulations of propagating waves in shallow water and propagating waves over a submerged bar were also carried and compared with published data.

Keywords

References

  1. Beck, R.F., 1994. Time-domain Computations for Floating Bodies. Applied Ocean Research, 16, 267-282. https://doi.org/10.1016/0141-1187(94)90016-7
  2. Boo, S.Y., Kim, C.H., 1994. Nonlinear Irregular Waves and Forces on Truncated Vertical Cylinder in a Numerical Wave Tank. Proceedings of 7th International Offshore and Polar Engineering Conference, Honolulu, HI, ISOPE, 3, 76-84.
  3. Cao, Y., Beck, R.F., 2016. Desingularized Boundary Integral Equations and Their Applications in Wave Dynamics and Wavebody Interaction Problems. Journal of Ocean Engineering and Science, 1(1), 11-29. https://doi.org/10.1016/j.joes.2016.01.001
  4. Cao, Y., Schultz, W.W., Beck, R.F., 1991. Three Dimensional Desingularized Doundary Integral Methods for Potential Problems. International Journal for Numerical Methods in Fluids, 12, 785-803. https://doi.org/10.1002/fld.1650120807
  5. Chapalain, G., Cointe, R., Temperville, A., 1992. Observed and Modeled Resonantly Interacting Progressive Water-waves. Coastal Engineering, 16, 267-300. https://doi.org/10.1016/0378-3839(92)90045-V
  6. Cointe, R., 1990. Numerical Simulation of a Wave Channel. Engineering Analysis with Boundary Elements, 7(4), 167-177. https://doi.org/10.1016/0955-7997(90)90003-R
  7. Ducrozet, G., Bonnefoy, F., Touze, D.L., Ferrant, P., 2012. A Modified High-Order Spectral Method for Wavemaker Modeling in a Numerical Wave Tank. European Journal of Mechanics B/Fluids, 34, 19-34. https://doi.org/10.1016/j.euromechflu.2012.01.017
  8. Goda, Y., 1998. Perturbation Analysis of Nonlinear Wave Interactions in Relatively Shallow Water. Third International Conference on Hydrodynamics, Seoul, South Korea, 33-51.
  9. Koo, W.C., Kim, M.H., 2004. Freely Floating-body Simulation by a 2D Fully Nonlinear Numerical Wave Tank. Ocean Engineering, 31, 2011-2046. https://doi.org/10.1016/j.oceaneng.2004.05.003
  10. Koo, W.C., Choi, K.R., 2009. Spatial Modulation of Nonlinear Waves and Their Kinematics using a Numerical Wave Tank. Journal of Ocean Engineering and Technology, 23(6), 12-16.
  11. Longuet-Higgins, M.S., Cokelet, E.D., 1976. The Deformation of Steep Surface Waves on Water: I. a Numerical Method of Computation. Proceedings of the Royal Society of London, Series A 350, 1-26. https://doi.org/10.1098/rspa.1976.0092
  12. Luth, H.R., Klopman, G., Kitou, N., 1994. Kinematics of Waves Breaking Partially on an Offshore Bar; LDV Measurements of Waves with and without a Net Onshore Current. Report H-1573, Delft Hydraulics.
  13. Wu, N.J., Tsay, T.K., 2009. Applicability of the Method of Fundamental Solutions to 3-D Wave-body Interaction with Fully Nonlinear Free Surface. Journal of Engineering Mathematics, 63, 61-78. https://doi.org/10.1007/s10665-008-9250-2
  14. Saranli, A., Baykal, B., 1998. Complexity Reduction in Radial Basis Function(RBF) Networks by Using Radial B-spline Functions. Neurocomputing, 18, 183-194. https://doi.org/10.1016/S0925-2312(97)00078-7
  15. Sung, H.G., Hong, S.Y., Choi, H.S., 1997. A Study on the Boundary Element Method for Numerical Analysis of Nonlinear Free Surface Waves(I). Journal of the Society of Naval Architects of Korea, 34(4), 53-60.
  16. Sung, H.G., Choi, H.S., 2000. Numerical Analysis of Two-Dimensional Nonlinear Radiation Problem Using Higher-Order Boundary Element Method. Journal of the Society of Naval Architects of Korea, 37(1), 67-81.
  17. Zhang, X.T., Khoo, B.C., Lou, J., 2006. Wave Propagation in a Fully Nonlinear Numerical Wave Tank: A Desingularized Method. Ocean Engineering, 33, 2310-2331. https://doi.org/10.1016/j.oceaneng.2005.11.002