• 한국수자원학회논문집
• /
• 제47권12호
• /
• pp.1213-1225
• /
• 2014

본 연구에서는 혼합사로 구성된 망상하천에서 사주의 변화와 하상토 분급현상을 실내실험을 통하여 파악하였다. 하상경사가 급한 하도에서 유사 유출량은 시간의 변화에 따라 매우 불규칙하지만, 경사가 완만한 하도에서 유사 유출량은 규칙적이고, 일정한 주기를 나타내었다. 또한 2중 퓨리에 해석을 통하여 지배적인 사주의 특성과 진폭을 분석하였다. 하상고가 상승하면 무차원 하상토 입경은 작아졌지만, 하상고가 저하되면 무차원 하상토 입경은 커졌다. 기층에서 무차원 한계소류력과 표층에서 무차원 한계 소류력의 비가 증가하면, 표층에서 평균입경과 무차원 하상토 중앙입경이 작아졌다. 또한 국부적으로 하상경사가 증가하면서, 유사의 선택적 이동에 의하여 하상토가 분급되고, 평면적으로 입경이 불균일하게 분포하는 분급 특성이 나타났다.

• 한국수자원학회논문집
• /
• 제49권1호
• /
• pp.73-81
• /
• 2016

본 연구에서는 식생에 의한 하도 변화와 하상토 분급특성을 파악하였다. 유사의 유출 특성은 불규칙하며, 식생 밀도가 증가함에 따라 유출되는 유사량은 감소하였다. 하상고는 불규칙하게 변하며, 하상토 표층에서 유사 입경은 작아졌다. 식생 밀도가 증가함에 따라 하상 표층에서 무차원 중 앙입경의 비는 감소하였다. 식생대에서 유사가 포착되거나, 식생대와 주흐름 사이에 경계층 흐름이 발생하여 유사가 퇴적되며, 식생대에서 흐름의 방향이 변화되어 표층에서 하상토 입도는 불규칙하게 분포하였다. 무차원 하상토 입경이 감소함에 따라, 차폐효과는 일정하게 감소하였다. 식생밀도가 증가함에 따라 하상 표층에서 차폐효과가 증가하며, 이것은 실험 수로 하류단에서 유사 유출량이 감소하는 것과 일치한다. 식생 밀도가 $0.5stems/cm^2$에서 저수로 이동은 감소하고 안정적인 특성을 보여주었으나, $0.7stems/cm^2$에서 저수로 이동은 증가하였다. 이것은 식생 밀도가 증가하면서 저수로 사행도가 증가하고, 식생대에서 유사가 퇴적되어 새로운 저수로가 형성되었기 때문이다.

• Journal of Forest and Environmental Science
• /
• 제14권1호
• /
• pp.138-144
• /
• 1998

표고폐골목의 재활용을 목적으로 폐골목과 정상재의 칩을 일정비율로 혼합하여 얻은 목질보드의 성질을 조사, 검토하였다. 그 결과 폐골목의 목섬유는 정상재보다 다소 짧고 표면이 거철었으며 폐골목 변재부의 밀도는 정상재에 비해 상당히 낮았다. 파티클보드의 두께 팽윤율 및 파괴계수의 시험결과 폐골목을 25-50% 정도 혼합한 경우는 정상재와 비슷한 값을 나타냈다. 결론적으로 폐골목은 파티클보드의 재료로 사용될 수 있고 정상재와의 혼합비율은 25~50% 범위에서 조정되어야 할 것으로 생각되었다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.227-234
• /
• 2002

With the increasing environmental consideration and stricter regulations, gasification of waste is considered to be more attractive technology than conventional incineration for energy recovery as well as material recycling. The experiment for combustible waste mixed with plastic and cellulosic materials was performed in the fixed bed gasifier to investigate the gasification behavior with the operating conditions. Waste pelletized with a diameter of 2~3cm and 5cm of length was gasified at the temperature range of 1100~145$0^{\circ}C$. It was shown that the composition of H$_2$ was in the range of 30~40% and CO 15~30% depending upon oxygen/waste ratio. Casification of waste due to thermoplastic property from mixed plastic melting and thermal cracking shows a prominent difference from that of coal or coke. It was desirable to maintain the top temperature up to foot to ensure the mass transfer and uniform reaction through the packed bed. As the bed height was increased, the formation of H$_2$ and CO was increased whilst $CO_2$ decreased by the char-$CO_2$ reaction and plastic cracking. From the experimental results, the cold gas efficiency was around 61% and heating values of product gases were in the range of 2800~3200㎉/Nm3.

• 펄프종이기술
• /
• 제39권4호
• /
• pp.68-75
• /
• 2007

In order to supplement insufficient nutrients of paper sludges, additional materials such as saw dust and rice husk were added during preparation of bed soils. Rice husk was more finely ground, compared to saw dust. The fine particles of the rice husk prevented their flow in a barrel of the expander. The mixed additives with paper sludges could be used to control the quantity of required nutrients for raising plants. That is, except for potassium and manganese, most of nutrients were decreased with adding the additives to paper sludge. The acidity of the paper sludges mixed with the saw dust or the rice husk was a little decreased with the increased amount of the additives. Differently from the bulk density of the paper sludges, the moisture content and the water absorption rate of the paper sludges were incremented with increasing the additives.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.192-199
• /
• 2010

This research produced internal model tester ($2.0m{\times}2.0m{\times}1.0m$) to evaluate the field application of Paju Unjeong District water recycling system for small streams eco-friendly river bed disparity method for the first time in Korea and conducted comparative analysis of the Paju Unjeong District water recycling system field test results and infiltration rate result of internal tests by each rainfall intensity following surface material. Infiltration rate result of internal tests concrete pavement by rainfall intensity following surface material, asphalt pavement, bentonite mate, stabilized soil construction and mixed soil construction manifested low infiltration rate. On the contrary, compaction soil, grassland and water permeable packaging materials resulted in significant amount of infiltration rate. As for the field permeability test results, they were manifested similar tendency as indoor permeability test results and they satisfied the standard for standard of water permeability of domestic disparity facility (less than $1.0{\times}10-7cm$/sec). As compaction rate increased, unconfined compression strength increased as well while coefficient of water permeability decreased.

• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.337-345
• /
• 2012

To check effects of operating variables on reaction characteristics of WGS catalyst for SEWGS process, water gas shift reaction tests were carried out in a pressurized fluidized bed reactor using commercial WGS catalyst and sand(as a substitute for $CO_2$ absorbent) as bed materials. Simulated syngas(mixed with $N_2$) was used as a reactant gas. Operating temperature was $210^{\circ}C$ and operating pressure was 20 bar. WGS catalyst content, steam/CO ratio, gas velocity, and syngas concentration were considered as experimental variables. CO conversion increased as the catalyst content and steam/CO ratio increased. CO conversion at fluidized bed condition was higher than that of fixed bed condition. However, CO conversion were maintained almost same value within the fluidized bed condition. CO conversion decreased as the syngas concentration increased. The optimum operation condition was confirmed and long time water gas shift reaction test up to 24 hours at the optimum operating conditions was carried out.

• 한국지반공학회논문집
• /
• 제24권10호
• /
• pp.105-111
• /
• 2008

하천제방의 안정성 향상을 위해서는 양질의 성토재료 사용, 철저한 다짐관리, 적절한 수리구조물 및 차수벽 설치 등이 필요하다. 특히, 하천제방 축조를 위한 양질의 성토재료는 하천제방의 안정성에 있어서 가장 중요한 요소라고 할 수 있다. 따라서 본 연구에서는 국내 하상토의 제방 성토재로서 적합성 평가를 위한 기초연구로서, 국내 하상토의 제체재료로서의 침투에 대한 안정성 평가를 위하여 하천설계기준(2005)의 제체 표준단면을 이용한 모형시험과수치해석을 수행하였다. 그 결과 국내 발생 하상토의 경우 대부분이 모래(SP)로서 하천설계기준 제체재료의 투수계수 ($10^{-3}cm/sec$ 이하)를 만족시키지 못하였으며 양질토 혼합 및 함수비 조정 등과 같은 안정처리공법이 요구되는 것으로 나타났다.

• 한국분말재료학회지
• /
• 제20권2호
• /
• pp.114-119
• /
• 2013

In the DBC (direct bonding of copper) process the oxygen partial pressure surrounding the AlN/Cu bonding pairs has been controlled by Ar gas mixed with oxygen. However, the direct bonding of Cu with sound interface and good adhesion strength is complicated process due to the difficulty in the exact control of oxygen partial pressure by using Ar gas. In this study, we have utilized the in-situ equilibrium established during the reaction of $2CuO{\rightarrow}Cu_2O$ + 1/2 $O_2$ by placing powder bed of CuO or $Cu_2O$ around the Cu/AlN bonding pair at $1065{\sim}1085^{\circ}C$. The adhesion strength was relatively better in case of using CuO powder than when $Cu_2O$ powder was used. Microstructural analysis by optical microscopy and XRD revealed that the interface of bonding pair was composed of $Cu_2O$, Cu and small amount of CuO phase. Thus, it is explained that the good adhesion between Cu and AlN is attributed to the wetting of eutectic liquid formed by reaction of Cu and $Cu_2O$.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.256-257
• /
• 2006

3D printing of NiTi alloys has been successfully achieved. A novel printing process has been developed and used, which consists in selective deposition of a solvent on a granule bed. The granules are composed of metal powders and thermoplastic binder, which are mixed and sieved by conventional methods. A sound green strength is obtained after solvent evaporation. Sintered parts exhibit good density, proper phase composition and shape memory behaviour.