• Journal of the Korean Home Economics Association
• /
• v.42 no.2
• /
• pp.151-160
• /
• 2004

This paper researched and compared the Jangsam religious costume, of Buddhism in Yeongsanjae with that of Shamanism in Gutgeori. Jangsam is a full length, flaxen hemp dress used in both religions. (Ed-please amend this sentence as necessary but note that it is essential to give some description of the costume here for non-Korean readers) The religious point of view can cause Jangsam's features to differ Jangsam's meanings are as follows. First, the purpose of wearing Jangsam in both the Buddhist priest's and Shamans' costumes is to gain power from the Almighty in order to maximize the religious effect. Second, Jangsam in the Shaman's costume features universality mixed with Buddhism and folk religion and becomes symbolic in Buddhism. As society disregards Shamanism, it has become combined with Buddhism. Third, Jangsam for Yeongsanjae or Chukwon Gut has kept its religious specialty as a Pyoeui despite various modifications.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.549-554
• /
• 2010

This paper deals with optimum design criteria for maximum torque density & minimum torque ripple of Flux Switching Motor (FSM) using RSM & FEM. The focus of this paper is to find a design solution through the comparison of torque density and torque ripple according to rotor shape variations. And then, a central composite design(CCD) mixed resolution is introduced, and analysis of variance (ANOVA) is conducted to determine the significance of the fitted regression model.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.145-150
• /
• 2006

In terms of that modem equipment become expensive, sophisticated and huge, the cost of developing the equipment is much considered in ILS. Therefore, the model of the level of repair analysis about equipment which have the multi-echelon and multi-indenture are purposed to derive optimal repair policy which mostly satisfy the availability by using the Mixed Integer Programming within the minimum cost.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.17-24
• /
• 2004

Surrface texturing of tribological application is another attractive technology of friction reducing. Also, reduction of friction is therefore considered to be a necessary requirement for improved efficiency of machine. In this paper attempts to investigate the effect of density for micro-scale dimple pattern using photolithography on bearing steel flat mated with pin-on-disk. We demonstrated the lubrication mechanism for a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. It is found that friction coefficient is depended on the density of surface pattern. It was thus verified that micro-scale dimple could affect the friction reduction considerably under mixed and hydrodynamic lubrication conditions from based on friction map. Lubrication condition regime has an influence on the friction coefficient induced the density of micro dimple.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.427-430
• /
• 2005

The purpose of this study is to choose the right chemical admixture to reduce slump loss of lightweight aggregate concrete. So we compare 3 types of chemical admixture as measuring slump loss from mixing to 60 minutes. The lightweight aggregate of this study is made by clayt and dust from lots of industry. To save natures, we will use many types of industrial wastes and try to spend much making artificial aggregate.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.641-644
• /
• 2006

Considering properties of the low-heat concrete mixed with the blended cements, the influences compared blended cements with ordinary portland cement made experiments on. (1) Blended cements were superior to OPC in the fresh concrete flow that the use of blended cements reduced chemical admixture. (2) The more the use of additive increase, the more bleeding happens. So it is considered to heights, order, and rate of placement, curing methods and so on. (3) The use of blended cements increase long term strength after 28 days, but decrease early strength and durability. So it is considered to the curing methods and early frost damage, and endurance limit.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.671-674
• /
• 2005

In this study, it is examined the properties of early strength of concrete mixed with polycarboxylate superplasticizer. For this experiment, it is analyzed that the slump and strength properties according to the mixture factors, compared with cements and superplasticizers of each company and curing temperature($15,\;20^{\circ}C$). (1) The slump loss of concrete used polycarboxylate superplasticizer(rapid strength type) showed $0.5\~1.5cm$, it is judged that slump loss according to the time lapse can be minimized. (2) The performance of polycarboxylate superplasticizer kept up consistency and accelerated strength development. it is possible to reveal 12MPa within $18\~20$hours at $20^{\circ}C$ curing, but impossible within 24hours at $15^{\circ}C$. (3) It is necessary to studies about rapid strength development in the low temperature.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.37-44
• /
• 1998

The objective of this study is development of high strength lightweight concrete and application or structural use. For this, mix proportions for each strength level were selected from lab tests, and adapted to producing ready-mixed concrete in batcher plant. It was very important to prewet the lightweight aggregates sufficiently for producibility and also workability. Splitting tensile strength of high-strength lightweight concrete produced has lower values than that of normal weight concrete, but modulus of rupture and modulus of elasticity are not less than normal weight concrete. The strength reduction factor ($\lambda$) for sand-lightweight concrete make higher than 0.85 present in structures using high-strength lightweight concrete. And it was showed that not parabola distribution but triangular distribution of stress in compression zone.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.3 s.234
• /
• pp.411-417
• /
• 2005

Surface texturing of tribological application is another attractive technology of friction reducing. Also, reduction of friction is therefore considered to be a necessary requirement for improved efficiency of machine. In this paper attempts to investigate the effect of density for micro-scale dimple pattern using photolithography on bearing steel flat mated with pin-on-disk. We demonstrated the lubrication mechanism for a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. It is found that friction coefficient is depended on the density of surface pattern. It was thus verified that micro-scale dimple could affect the friction reduction considerably under mixed and hydrodynamic lubrication conditions from based on friction map. Lubrication condition regime has an influence on the friction coefficient induced the density of micro dimple.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1159-1164
• /
• 2003

Two processing routes (i.e., the gel casting and polymer preform routes) using polymer beads were studied to fabricate porous ceramics with a cellular structure. The gel casting route, comprising the gel casting of a ceramic slurry mixed with polymer beads, was found to be inadequate to produce porous ceramic bodies with a interconnected pore structure, due to complete coating of the slurry on the polymer beads, which left just isolated pores in the final sintered bodies. The polymer preform route, involving the infiltration of a polymer beads preform with the ceramic slurry, successfully produced porous ceramics with a highly interconnected network of spherical pores. The pore size of 250-300 $\mu\textrm{m}$ was demonstrated and the porosity ranged from 82 to 86%. This process is advantageous to control the pore size because it is determined by the sizes of polymer beads used. Another feature is the avoidance of hollow skeleton, giving a high strength.