• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.6
• /
• pp.61-66
• /
• 2008

In railroad operation, turnout is the device designed to provide very critical functions of moving the train to the neighboring rail. It's the only movable section among the rail and track equipment, which has a complicated structure and as rapid movement between the wheel and rail during operation is unavoidable, the safety and the vibration caused by the impact load of the passing train becomes always the major concern. Response to rail vibration tends to vary depending on physical properties of the rail, rail base and the ground, making it difficult to estimate the quantitative outcome through the measurement. Thus, experimental or empirical approach, rather than an analytic method, has been more commonly employed to deal with the ground vibration. To predict the vibration of the turnout, an experimental value and the measured values are applied in parallel to the factors with a high degree of uncertainty. This study hence was intended to compare and analyze the vibration values measured at the crossing part of manganese turnout by type of train and turnout and distance, as well as predict the intensity of vibration generated at the crossing part of manganese turnout when tilting train accelerates.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.3
• /
• pp.27-39
• /
• 2009

The 1st Incheon Rapid Transit Line opened in October, 1999. However, the current development plans for areas near stations do not involve plans for the both urban planning and transportation together. As the focus on only the aspect of installing a new transportation mode, the developments even make the problems such as reckless development and traffic congestion gets worse. It is required to analyse status of the current land uses and land use plans in the future and consider distribution of functions of the areas near stations and aims of development plans so as to harmonize the functions of each region in view of making balance in the whole city. The aims of developments of areas near stations has to focus on the study follows steps to find and suggest aims and strategies for the revitalization plan for areas near stations with considering the both transportation and land uses together. The plans for the areas near stations of the Incheon 1st Rapid Transit Line are analysed and then the features and rational strategies are derived. The impact is analysed as applying the development strategies derived from the step into the areas near the stations of Incheon 1st Rapid Transit line.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.4
• /
• pp.65-74
• /
• 2017

North Korea is one of the high vulnerable countries facing the threat of natural disaster and has experienced more frequent disasters in recent years. These disasters have significantly led to food shortages and large reductions in crop yields. In 2015, both North Korean officials and international agencies had identified the extreme drought event, the worst in one hundred years according to the North Korean government. The objective of this study was an assessment of the extreme drought events in 2014~2015, and to apply climatic drought indices for drought monitoring in North Korea. Characteristics of the extreme drought in North Korea are examined by using the weekly-based Standardized Precipitation Evapotranspiration Index (SPEI). The drought characteristics illustrated by the SPEI results are compared with a Standardized Precipitation Index (SPI) results and drought impact information to understand how these indices can explain the drought conditions within the country. These results demonstrated that the SPEI could be an effective tool to provide improved spatial and temporal drought conditions to inform management decisions for drought policy.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.119-122
• /
• 2008

The paved area like a road or bridge where having high impermeable rates were accumulated various non-point sources(NPS) by passing vehicles during dry season periods. They are flowed in the river continuous when it rains and could negative impact on environment. Therefore, this study monitoring NPS for two years and determinating for each pollutant EMCs and mass loading. The result shows that the EMC ranges are 11.60$\sim$230.90 mg/L for TSS, 4.58$\sim$31.90 mg/L for BOD, 1.86$\sim$9.20 mg/L for TN and 0.14$\sim$1.55 mg/L for TP. Also, the ranges of washed-off mass loading are determined to 0.78$\sim$18.01 kg/day for TSS, 0.47$\sim$1.17 kg/day for BOD, 0.00$\sim$0.01 kg/day for Pb and 0.01$\sim$0.06 kg/day for Zn.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.27-34
• /
• 2010

Recently, high-speed railway systems have gained increased interest as a means of environmental friendly transportation, and numerous bridges for high-speed railways have been constructed accordingly. However, bridge design for high-speed railways requires more consideration than conventional railway design because fast-moving trains will lead to significant impact on bridge structures. Thus, this research proposes a revised design considering both bridge-rail longitudinal interaction and dynamic effect of trains to ensure stability of fast travelling trains. To validate the proposed design algorithm, numerical analyses are performed and compared using a constructed 250 m long bridge with 5 spans for a high-speed railway. From the numerical results, the proposed optimum design of high-speed railway bridges exhibits the most economic life-cycle-cost (LCC) when compared with several existing design approaches.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.35-40
• /
• 2010

The present study proposes the strengthening method to use Conclinic Advanced FiberWrep(CAF) so as to improve Load Carrying Capacity of the RC slab bridge. In order to evaluate the strengthening performance, we strengthen 50cm per unit-width of CAF to the slab's bottom of the test bridge that designed with DB 18, then perform Static and Dynamic Field Load Test. As a result of this, 14.7% of the maximum displacement, 5.0% of the strain and 33.7% of the impact factor are reduced after strengthening. At the middle of the test spans, nominal resisting ratio is increased by 27% and Service Load Carrying Capacity is increased by 44.6%, 48.9% of each span 1 and 2. In conclusion, this study indicates that the strengthening method using CAF is very effective to improve the deteriorated RC slab bridge designed with DB 18, to the DB 24 of the first class bridge design load.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.105-115
• /
• 2008

Urbanization results in increased runoff volume and peak flowrate and shortening in time of concentration, which may cause frequent flooding downstream. There are various types of flow retardation methods including detention ponds, retention ponds, and infiltration ponds. In general, hydrologic models to design the detention pond are classified into planning model and design model. This study is comparing and analyzing of planning model to design the detention pond in urban area. Detention ponds data of Disaster Impact Assessment Report on 22 sites were analyzed to investigate proper planning models in this study. From this research, following conclusions are derived, 1) In case of on-line detention pond, Lee model(1991) is the best planning model and similar to real storage volume. 2) In case of off-line detention pond, Abt and Grigg model is much more proper model compared to other models.

• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.625-636
• /
• 2013

Pressing demands of economic competitiveness, the need for large-scale deployment, minimizing the need of human intervention, and experience from the past events and incidents at operating reactors have guided the evolution and innovations in reactor technologies. Indian innovative reactor 'AHWR' is a pressure-tube type natural circulation based boiling water reactor that is designed to meet such requirements, which essentially reflect the needs of next generation reactors. The reactor employs various passive features to prevent and mitigate accidental conditions, like a slightly negative void reactivity coefficient, passive poison injection to scram the reactor in event of failure of the wired shutdown systems, a large elevated pool of water as a heat sink inside the containment, passive decay heat removal based on natural circulation and passive valves, passive ECC injection, etc. It is designed to meet the fundamental safety requirements of safe shutdown, safe decay heat removal and confinement of activity with no impact in public domain, and hence, no need for emergency planning under all conceivable scenarios. This paper examines the role of the various passive safety systems in prevention and mitigation of severe plant conditions that may arise in event of multiple failures. For the purpose of demonstration of the effectiveness of its passive features, postulated scenarios on the lines of three major severe accidents in the history of nuclear power reactors are considered, namely; the Three Mile Island (TMI), Chernobyl and Fukushima accidents. Severe plant conditions along the lines of these scenarios are postulated to the extent conceivable in the reactor under consideration and analyzed using best estimate system thermal-hydraulics code RELAP5/Mod3.2. It is found that the various passive systems incorporated enable the reactor to tolerate the postulated accident conditions without causing severe plant conditions and core degradation.

• Journal of Environmental Policy
• /
• v.8 no.4
• /
• pp.171-198
• /
• 2009

The issue of burden sharing between sectors has become a pertinent national issue with respect tothe establishment of national greenhouse gas (GHG) reduction targets, and the means to achieve these targets. This study explores methods for equitable sectoral allocation to reduce GHGs based on an allocation index taking into account relevant attributes in line with national GHG emissions trends and structures. This paper considered potential for GHG reduction, rate of increase of emissions, and ability to pay as suitable criteria for analysis of each sector. As a result of the analysis, it was found that equitable allocation methods have significantly different burden sharing compared to allocation that considers only potential for GHG reduction. Accordingly, further empirical study on various simulations based on national economic impact will be essential for better policy solutions. This study will contribute to applying national allocation plans in a logical, consistent and transparent manner.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.31-37
• /
• 2008

Traffic flow which is prescribed under previous traffic effect/access act is analyzed by traffic volume, V/C, mean speed on road and LOS on the intersection. These indexes based on analytical method can not consider stochastic characteristics of traffic flow. Moreover it is hard to analyze traffic flow visually in whole traffic effect area because only individual road and intersections are targeted. In this study, it is devised to show traffic flow analysis method within traffic effect area visually applying microscopic-simulation by car-following theory, and then based on this, effect analyze ways are studied according to space range plan, improvement measure establishment and etc. To execute this study, effect area is set up using V/C, and the change of traffic current around development area is analyzed using microscopic-simulation program.