• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.467-468
• /
• 2006

To perform the comparative study, we experimented on two differential epitaxial structures, the conventional Metamorphic High Electron Mobility Transistor (MHEMT) using the InAlAs/InGaAs structure and the InP-composite channel MHEMT adopting the InAlAs/InGaAs/InP/n-InP structure. Compared to the conventional MHEMT, the InP-composite channel MHEMT shows improved breakdown performance; over about 3.5 V. This increased breakdown voltage can be explained by the lower impact ionization coefficient of the InP-composite channel MHEMT than that of the conventional MHEMT.

• Journal of Magnetics
• /
• 제19권1호
• /
• pp.55-58
• /
• 2014

We have synthesized ferromagnetic ${\tau}$-phase $Mn_{54}Al_{46}/{\alpha}$-phase $Fe_{65}Co_{35}$ composite by annealing a mixture of paramagnetic ${\varepsilon}$-phase $Mn_{54}Al_{46}$ and ferromagnetic ${\alpha}$-phase $Fe_{65}Co_{35}$ particles at $650^{\circ}C$. The volume fraction ($f_h$) of hard ${\tau}$-phase $Mn_{54}Al_{46}$ of the composite was varied from 0 to 1. During the annealing, magnetic phase transformation occurred from paramagnetic ${\varepsilon}$-phase to ferromagnetic ${\tau}$-phase $Mn_{54}Al_{46}$. The magnetization and coercivity of the composite monotonically decreased and increased, respectively, as the $f_h$ increased. These results are in good agreement with our proposed composition dependent coercivity and modified magnetization equations.

• 한국음향학회지
• /
• 제21권1호
• /
• pp.37-41
• /
• 2002

본 논문에서는 실내 잔향곡선의 초기감쇠시간을 복수 채널을 사용하여 단축시켰다. 실내에서 수음된 음성신호는 MINT(Multiple - input / output INverse Theorem)에 기초하여 풀밴드와 서브밴드로 역필터링하였으며, 복수 채널의 적응필터는 LMS(least Mean Square)와 NLMS(Normalized Least Mean Square) 알고리즘을 사용하였다. 실험결과 잔향곡선에서 -20 dB까지 감소하는데 걸리는 시간이 2개의 마이크로폰을 사용하였을 때 풀밴드 NLMS에서 약 1/3로 단축됨을 확인하였다. 실제 음장의 전달함수를 사용한 주관평가에서는 80%의 청취자가 MINT에 의해 초기감쇠시간이 단축된 음성의 명료도가 향상되었다고 평가하였다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.213-217
• /
• 2001

본 논문에서는 CPW 구조를 이용하여 60 GHz 무선 시스템 응용을 위한 V-band용 하향 주파수 혼합기를 설계 및 제작하였다. 하향 주파수 혼합기의 설계 및 제작에 있어서 GaAs PHEMT(Pseudomorphic high electron mobility transistor)를 기반으로 하였으며, 회로설계를 위해 coplanar waveguide(CPW) 라이브러리를 구축하여 이용하였다. 제작된 하향 주파수 혼합기의 변환이득은 국부발진주파수(LO) 입력이 8 dBm일 때 -8.5 dB의 최대 변환이득 특성을 얻었으며 Pl dB는 -3.3 dBm을 얻었다. 제작된 회로의 칩 크기는 1.6$\times$l.6 $\textrm{mm}^2$ 이다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.575-578
• /
• 2005

We report on a low-cost V-band wireless transceiver with no use of any local oscillator in the receiver block using a self-heterodyne architecture. V-band Microwave monolithic IC (MMIC) modules were developed to demonstrate the wireless transceiver using coplanar waveguide (CPW) and GaAs PHEMT technologies. The MMIC modules such as the MMIC low noise amplifier (LNA), medium power amplifier (MPA) and the up/down-mixer were installed in the transceiver system. To interface the MMIC chips with the component modules for the transceiver system, CPW-to-waveguide fin-line transition modules of WR-15 type were designed and fabricated. The fabricated LNA modules showed a $S_{21}$ gain of 8.4 dB and a noise figure of 5.6 dB at 58 GHz. The MPA modules exhibited a gain of 6.9 dB and a $P_1$ $_{dB}$ of 5.4 dBm at 58 GHz. The conversion losses of the up-mixer and the down-mixer module were 14.3 dB at a LO power of 15 dBm, and 19.7 dB at a LO power of 0 dBm, respectively. From the measurement of V-band wireless transceiver, a conversion gain of 0.2 dB and a P $_{1dB}$ of 5.2 dBm were obtained in the transmitter block. The receiver block showed a conversion gain of 2.1 dB and a P $_{1dB}$ of -18.6 dBm. The wireless transceiver system demonstrated a successful data transfer within a distance of 5 meters.

• 농약과학회지
• /
• 제14권4호
• /
• pp.433-439
• /
• 2010

담배가루이 성충에 대한 식물정유의 기피효과를 조사하기 위하여, 20종의 식물정유를 대상으로 담배가루이 성충의 기피반응을 검정한 결과, mint 오일만이 $5{\mu}{\ell}$의 약량처리에서 90% 이상의 높은 기피효과를 나타내었다. 2, 1, 0.5, $0.1{\mu}{\ell}$ 약량처리에서는 77.8~65.7%로 농도의존적으로 유의성이 나타났다. Wild mint 오일을 분석하고 생물검정을 수행한 결과, GC/MS 분석으로 wild mint oil의 주요 구성성분이 menthol(56.5%), menthone(29.0%), menthyl acetate(14.5%)로 밝혀졌으며, 기피활성을 보인 주요구성성분은 원래 오일에 함유되어 있는 비율로 $10{\mu}{\ell}$ 오일을 처리하였을 때 menthol과 menthone이 각각 77.8과 75.8%의 기피효과를 나타내었으며, menthyl acctate는 유의성이 없었다. 주요 구성성분을 혼합하여 잠정한 결과, 단독검정시와 비교하여 기피효과가 더 높게 나타났다.

• 대한전자공학회논문지TC
• /
• 제38권11호
• /
• pp.63-70
• /
• 2001

밀리미터파 대역에서 안정적이고 경제적인 local oscillator (LO) 신호를 생성하기 위한 주파수 체배기를 설계 및 제작하였다. 주파수 체배기는 14.5 GHz를 입력받아 29 GHz를 생성하도록 설계되었으며, 측정 결과 14.5 GHz에서 S11이 -9.2 dB, 29 GHz에서 S22가 -18.6 dB 로 입력 측은 14.5 GHz에, 출력 측은 29GHz에 매칭이 되었다. 변환손실의 경우 14.5 GHz에서 입력전력 6 dBm일 때 최소 값인 18.2 dB를 보였으며, 출력 단에서의 주파수 스펙트럼 특성은 14.5 GHz에서 15.2dB의 값을 나타내었다. 또한 입력신호의 isolation특성은 10.5 GHz에서 18.5GHz까지 주파수 범위에서 30 dB이상의 값을 보였다. 제작된 MMIC(Microwave monolithic integrated circuits) 주파수 체배기의 칩 사이즈는 $1.5{\times}2.2\;mm^2$이다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권3호
• /
• pp.210-219
• /
• 2005

We report on a low-cost V-band wireless transceiver with no use of any local oscillator in the receiver block using a self-heterodyne architecture. V-band millimeter-wave monolithic IC (MMIC) modules were developed to demonstrate the wireless transceiver using coplanar waveguide (CPW) and GaAs PHEMT technologies. The MMIC modules such as the MMIC low noise amplifier (LNA), medium power amplifier (MPA) and the up/down-mixer were installed in the transceiver system. To interface the MMIC chips with the component modules for the transceiver system, CPW-to-waveguide fin-line transition modules of WR-15 type were designed and fabricated. The fabricated LNA modules showed a $S_{21}$ gain of 8.4 dB and a noise figure of 5.6 dB at 58 GHz. The MPA modules exhibited a gain of 6.9 dB and a $P_{1dB}$ of 5.4 dBm at 58 GHz. The conversion losses of the up-mixer and the down-mixer module were 14.3 dB at a LO power of 15 dBm, and 19.7 dB at a LO power of 0 dBm, respectively. From the measurement of V-band wireless transceiver, a conversion gain of 0.2 dB and a $P_{1dB}$ of 5.2 dBm were obtained in the transmitter block. The receiver block showed a conversion gain of 2.1 dB and a $P_{1dB}$ of -18.6 dBm. The wireless transceiver system demonstrated a successful data transfer within a distance of 5 meters.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.73-77
• /
• 2001

We studied the fabrication of GaAs-based pseudomorphic high electron mobility transistors(PHEMT`s) for the purpose of millimeter- wave applications. To fabricate the high performance GaAs-based PHEMT`s, we performed the simulation to analyze the designed epitaxial-structures. Each unit processes, such as 0.1 m$\mu$$\Gamma$-gate lithography, silicon nitride passivation and air-bridge process were developed to achieve high performance device characteristics. The DC characteristics of the PHEMT`s were measured at a 70 $\mu$m unit gate width of 2 gate fingers, and showed a good pinch-off property ($V_p$= -1.75 V) and a drain-source saturation current density ($I_{dss}$) of 450 mA/mm. Maximum extrinsic transconductance $(g_m)$ was 363.6 mS/mm at $V_{gs}$ = -0.7 V, $V_{ds}$ = 1.5 V, and $I_{ds}$ =0.5 $I_{dss}$. The RF measurements were performed in the frequency range of 1.0~50 GHz. For this measurement, the drain and gate voltage were 1.5 V and -0.7 V, respectively. At 50 GHz, 9.2 dB of maximum stable gain (MSG) and 3.2 dB of $S_{21}$ gain were obtained, respectively. A current gain cut-off frequency $(f_T)$ of 106 GHz and a maximum frequency of oscillation $(f_{max})$ of 160 GHz were achieved from the fabricated PHEMT\\`s of 0.1 m$\mu$ gate length.h.

• Journal of Magnetics
• /
• 제15권3호
• /
• pp.103-107
• /
• 2010

We investigated spin-polarized current switching of Pac-man type II (PM-II) nanoelements in Pac-man shaped nanoscale spin-valves (Co/Cu/Py) using micromagnetic simulations. The effects of slot angle and antiferromagnetic (AFM) layer were simulated to obtain optimum switching in less than 2 ns. At a critical slot angle of $105^{\circ}$, the lowest current density for anti-parallel to parallel (AP-P) switching was observed due to no vortex or antivortex formation during the magnetic reversal process. All other slot angles for AP-P formed a vortex or antivortex during the magnetization reversal process. Additionally, a vortex or anti-vortex formed for all slot angles for parallel to anti-parallel (P-AP) switching. The addition of an AFM layer caused the current density to decrease significantly for AP-P and P-AP at slot angles less than $90^{\circ}$. However, at slot angles greater than $90^{\circ}$, the current density tended to decrease by less amounts or actually increased slightly as shape anisotropy became more dominant. This allowed ultra-fast switching with 5.05 and $5.65{\times}10^8\;A/cm^2$ current densities for AP-P and P-AP, respectively, at a slot angle of $105^{\circ}$.