• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.99-108
• /
• 2012

These days, spontaneous ignition phenomena by oxidizing heat frequently occur in the circumstances of processing and storing waste tires. Therefore, to examine the phenomena, in this work, this researcher conducted the tests of fires of fragmented waste tires (shredded tire), closely investigated components of the fire residual materials collected in the processing and storing place, and analyzed the temperature of the starting of the ignition, weight loss, and heat of reaction. For the study, this researcher conducted fire tests with fragmented waste tires in the range of 2.5 mm to 15 mm, whose heat could be easily accumulated, and performed heat analysis through DSC and TGA, DTA, DTG, and GC/MS to give scientific probability to the possibility of spontaneous ignition. According to the tests, at the 48-hour storage, rapid increase in temperature ($178^{\circ}C$), Graphite phenomenon, smoking were observed. And the result from the DTA and DTG analysis showed that at $166.15^{\circ}C$, the minimum weight loss occurred. And, the result from the test on the waste tire analysis material 1 (Unburnt) through DSC and TGA analysis revealed that at $180^{\circ}C$ or so, thermal decomposition started. As a result, the starting temperature of ignition was considered to be $160^{\circ}C$ to $180^{\circ}C$. And, at $305^{\circ}C$, 10 % of the initial weight of the material reduced, and at $416.12^{\circ}C$, 50 % of the intial weight of the material decreased. The result from the test on oxidation and self-reaction through GC/MS and DSC analysis presented that oxidized components like 1,3 cyclopentnadiene were detected a lot. But according to the result from the heat analysis test on standard materials and fragmented waste tires, their heat value was lower than the basis value so that self-reaction was not found. Therefore, to prevent spontaneous ignition by oxidizing heat of waste tires, it is necessary to convert the conventional process into Cryogenic Process that has no or few heat accumulation at the time of fragmentation. And the current storing method in which broken and fragmented materials are stored into large burlap bags (500 kg) should be changed to the method in which they are stored into small burlap bags in order to prevent heat accumulation.

• Journal of Korean Society of Forest Science
• /
• v.81 no.2
• /
• pp.191-199
• /
• 1992

This study was conducted to identify fungi causing canker dieback and melanconis disease of walnut trees (Juglans sinensis Dode) in Korea and clarify the pathogenicity and factors affecting the growth of these fungi. The causal fungi isolated from infected walnut stems and branches obtained from the commercial walnut orchards in Cheonwon, Goesan, Youngdong were identified as Botryosphaeria dothidea (Moug, ex Fries) Casati et de Notaris, Phoniopsis albobestita Fairman, Melanconis juglandis (Ellis et Everhart) Graves and their pathogenicity was confirmed by inoculation test. Temperature range for minimum growth of three fungi was 8 to $35^{\circ}C$ and the optimum temperature for mycelial growth of B. dothidea and P. albobestita ranged from 25 to $30^{\circ}C$, while the optimum temperature for M. juglandis ranged from 20 to $25^{\circ}C$. The optimum pH range for mycelial growth of P. albobestita was 4.0~5.0 and that for B. dothidea and P. juglandis 4.0~8.0. Glucose, sucrose, starch or maltose, as a carbon source, and histidine or potassium nitrate as a nitrogen source were more suitable compounds for growth. of B, dothidea, P. albobestita grew very well on the medium containing alanine and potassium nitrate as a nitrogen source, and utilized well glucose and sucrose as a carbon source. M. juglandis grew well on the medium containing glucose, and sucrose as a carbon source and utilized well potassium nitrate as a nitrogen source. The dieback and twig blight caused by P. albobestita were more severe than those by B. dothidea and M. juglandis at three locations investigated. Incidences of canker and dieback were more frequently observed in aged walnut trees than in young ones.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.327-333
• /
• 2014

BACKGROUND: Rabbiteye blueberry(Vaccinium ashei) is one of the most widely grown blueberry types in the world, together with Northern and Southern highbush blueberry(Vaccinium corymbosum). Rabbiteye blueberry have higher soil adaptability and fruit productivity but less cold tolerance to low temperature than highbush blueberry. The objective of this study is to investigate freezing tolerance of floral buds and establish a cultivation zone for rabbiteye blueberry cultivars. METHODS AND RESULTS: Bearing branches which have similar thickness and same number of floral buds were collected in the early January at the blueberry germplasm preservation plot located in Namhae Sub-station, National Institute of Horticultural and Herbal Science in Gyeongsangnamdo. Cold response of bearing branches were investigated by electrolyte leakage and freezing tolerance of floral buds were determined by ovary browning ratio of 50%($LT_{50}$). Cultivation zone was established based on mean annual extreme minimum temperature for 30 years, from 1981 to 2010. The electrolyte leakage of bearing branches in rabbiteye blueberry increased as temperature decreased and was lowest in 'Brightwell' but highest in 'Bluegem' when they were kept in $-5^{\circ}C$. Besides, the electrolyte leakage increased in 'Brightblue', 'Brightwell', 'Climax', 'Delite', 'Gardenblue', 'Southland' and 'Woodard' in $-20^{\circ}C$. Freezing tolerance($LT_{50}$) was lowest in 'Bluegem' and 'Homebell'($-13.3^{\circ}C$), and highest in 'Tifblue'($-25^{\circ}C$) among different rabbiteye blueberry cultivars. $LT_{50}$ of 'Southland' was from -15.0 to $-16.7^{\circ}C$, that of 'Delite', 'Brightwell',' Austin' and 'Climax' was $-18.3^{\circ}C$, and that of 'Bluebelle', 'Woodard' and 'Powderblue' was $-20^{\circ}C$. CONCLUSION: This study indicate that The hardiness zones of rabbiteye blueberry were classified into Six cultivation zones and cultivation zones of most cultivars were the south of Jeollanam-do and Gyeongdangnam-do, except for 'Tifblue.'

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.4
• /
• pp.233-250
• /
• 1970

The present paper deals with the results of the observations on the characteristics of the eggs being ripen by injection of synahorin and the larvae of the black porgy. Mylio macrocehalus (Basilewsky). The adult fish used in the experiments, during May 11th to June 5th, 1970, were obtained from a fish-farm of the Atsumi Fish Culture Company in Aichi Prefecture, Japan, The results obtained are as follows: 1. The egg is colorless and buoyant, spherical in shape, measuring from $0.81\~0.96\;mm$ in dia-meter with a single oil globule, measuring $0.20\~0.23\;mm$. 2. Hatching took place within about 35 hours and 50 minutes after insemination of eggs at the water temperature $19.6\~22.5^{\circ}C$ (Mean, $20.6^{\circ}$). 3. The newly hatched larvae were 1.57 mm in total length, with the oil globule situated at the posterior part of the elongated oval-shaped yolk sac. Melanophores and xanthophores were distributed on the middle of the caudal region, and were scattered on the surface of the oil globule, but none on the yolk sac. 4. The diameter of the eggs ill each adult is distinguished into two types, large and small. The former is in the range of $0.811\~0.873\;mm$, the latter is $0.874\~0.963\;mm$. 3. The hatching rate of black porgy was in the range of $78.63\~95.19\%$ in large and $68.84\~74.80\%$ in small eggs. The mean hatching rate of total eggs was $79.80\%$. 6. The optimum temperature of hatching black porgy is in the range of $20\~26^{\circ}C$. The highest temperature limit of hatching the black porgy is from $26.71\~28.56^{\circ}C$. 7. The total length of hatched larvae is not maintained pararell to diameter of eggs and total length of the large larvae is from $1.976\~2.225mm$, and that of small larvae is $1.526\~1.90mm$. 8. The diameter of yolk sac of black porgy is in the range of $0.878\~0.979\;mm$ 9. The initial survived larva of the black porgy was $13.71\%$ in minimum, and $79\%$ in maximam. And the mean initial survived rate was $48.3\%$. 10. In conclusion, the biological characteristics of hatched larva of black porgy is seemed to be possible for large scale production of artificial seedlings. But experimental results make initial food the prime object believed to be supplemented.

• The Korean Journal of Mycology
• /
• v.45 no.4
• /
• pp.270-283
• /
• 2017

In a survey on higher fungi from 2004 to 2011, and also in 2013, in Naejangsan National Park, a total of 2 divisions, 7 classes, 21 orders, 74 families, 229 genera, and 521 species were observed. Dominant species belonged to the families Boletaceae and Russulaceae (44 species), Agaricaceae (35 species), Polyporaceae (29 species), and Amanitaceae (27 species). For the habitat environment, 21 families, 44 genera, and 192 species (36.9%) (63 species of poisonous mushroom, 79 species of edible and medicinal mushroom, and 43 species of unknown edible & poisonous mushroom) of ectomycorrhizal mushrooms were found; 41 families, 118 genera, and 199 species (38.2%) (14 species of poisonous mushroom, 85 species of edible & medicinal mushroom, and 90 species of unknown edible and poisonous mushroom) of litter decomposing and wood rotting fungi were found, and 29 families, 66 genera, and 121 species (23.2%) (8 species of poisonous mushroom, 54 species of edible and medicinal mushroom, and 47 species of unknown edible & poisonous mushroom) of grounding fungi were found, and 9 species were the other habitat. In terms of seasonality, most of the higher fungi were found in July, August, and September. In terms of altitude, the most species were observed at 200~299 m, and populations dropped by a significant level at an altitude of 700 m or higher. It seemed that the most diversified higher fungi occurred at climate conditions with a mean air temperature of $25.0{\sim}28.9^{\circ}C$, a maximum air temperature of $30.0{\sim}33.9^{\circ}C$, a minimum air temperature of $21.0{\sim}24.9^{\circ}C$, a relative humidity of 73.0~79.9%, and over 400.0 mm of rainfall.

• The Korean Journal of Mycology
• /
• v.21 no.1
• /
• pp.16-22
• /
• 1993

Morphological and cultural characteristics of fungi causing rice sclerotial diseases were examined. Hyphal widths of R. solani and R. oryzae were same and ranged $6.0-12.0\;{\mu}m$ with average $9.0\;{\mu}m$, the widest among those of the sclerotial fungi examined. Hyphal width of R. oryzae sativae ranged $6.0-9.0{\mu}m$ with average $7.4{\mu}m$. Hyphal width of R. cerealis was the narrowest among those of Rhizoctonia species examined, and the same was hyphal width of S. oryzae among those of Sclerotium species. Nuclear staining by HCL-Giemsa method showed that R. solani and R. oryzae had many nuclei within one hyphal cell, S. oryzae one nucleus, and the other sclerotial fungi mostly two nuclei. The nuclear number of R. solani was the largest, which ranged 2-17 with average 6.3. Average size of sclerotia of the sclerotial fungi except S. hydrophilum and S. oryzae produced in lesions ranged 1.0-2.0mm. Average size of sclerotia of S. hydrophilum and S. oryzae was 0.5mm and 0.24mm, respectively. Sclerotia of R. solani and R. oryzae produced in culture were more variable in size and larger than those produced in lesions. However, the sclerotial sizes of the other sclerotial fungi produced in culture were almost the same as those produced in lesions. Sclerotial colors of sclerotial fungi produced in lesions were similar to those produced in culture, but sclerotial shapes of some sclerotial fungi exhibited somewhat difference between the sclerotia produced in lesions and in culture. Optimum temperature for mycelial growth of R. cerealis was $23^{\circ}C$, and that of the other sclerotial fungi ranged from $27\;to\;33^{\circ}C$. Maximum temperature for mycelial growth of some sclerotial fungi was as high as $41^{\circ}C$, while that of R. cerealis was as low as $31^{\circ}C$. Minimum temperature for mycelial growth of R. cerealis was $2^{\circ}C$, and that of the other sclerotial fungi ranged from $6\;to\;10^{\circ}C$.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.235-247
• /
• 2020

Simulation study and validation on 50 L/hr pilot-scale Bunsen process was carried out in order to investigate thermodynamics parameters, suitable reactor type, separator configuration, and the optimal conditions of reactors and separation. Sulfur-Iodine is thermochemical process using iodine and sulfur compounds for producing hydrogen from decomposition of water as net reaction. Understanding in phase separation and reaction of Bunsen Process is crucial since Bunsen Process acts as an intermediate process among three reactions. Electrolyte Non-Random Two-Liquid model is implemented in simulation as thermodynamic model. The simulation results are validated with the thermodynamic parameters and the 50 L/hr pilot-scale experimental data. The SO₂ conversions of PFR and CSTR were compared as varying the temperature and reactor volume in order to investigate suitable type of reactor. Impurities in H₂SO₄ phase and HI_X phase were investigated for 3-phase separator (vapor-liquid-liquid) and two 2-phase separators (vapor-liquid & liquid-liquid) in order to select separation configuration with better performance. The process optimization on reactor and phase separator is carried out to find the operating conditions and feed conditions that can reach the maximum SO₂ conversion and the minimum H₂SO₄ impurities in HI_X phase. For reactor optimization, the maximum 98% SO₂ conversion was obtained with fixed iodine and water inlet flow rate when the diameter and length of PFR reactor are 0.20 m and 7.6m. Inlet water and iodine flow rate is reduced by 17% and 22% to reach the maximum 10% SO₂ conversion with fixed temperature and PFR size (diameter: 3/8", length:3 m). When temperature (121℃) and PFR size (diameter: 0.2, length:7.6 m) are applied to the feed composition optimization, inlet water and iodine flow rate is reduced by 17% and 22% to reach the maximum 10% SO₂ conversion.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.2
• /
• pp.195-201
• /
• 2012

It is important to determine the optimum harvesting time that impact decisively on the quality of vegetable waxy corns. In general, it takes 20~25 days from silking to harvest according to ecotype when waxy corn hybrids were sown in April. We identified the optimum harvesting time by the ecotypes and seeding dates for the establishment of corn double cropping system of waxy corn. It takes 23~25 days from silking to harvest regardless of ecotype, when waxy corns were sown at early in April or late in June. It takes 28~31 days when Chalok1, early maturing type, was sown between in July 10, and in July 30. It takes 29~31 days when Ilmichal, medium late maturing type, was sown between in July 10 and in July 20, but 39 days were required when sown at in July 30. The cumulative temperature for harvesting was about $1700^{\circ}C{\sim}2100^{\circ}C$. The minimum cumulative temperature from seeding to harvest was approximately $600^{\circ}C$. These results will be helpful to the farmers for determining the optimum harvest time of vegetable waxy corns.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.1
• /
• pp.56-62
• /
• 2020

The meteorological ecology of a soybean variety (Glycine max Merrill) and its characteristics are important factors in selecting soybean variety suitable for the environment. This experiment was conducted to estimate the meteorological- ecological characteristics of soybean for 27 crop cultivation regions in North Korea. The meteorological ecology of each region was determined by the last harvest date and the maximum growth day determined using the daily minimum temperature of the region. The soybean meteorological group for 27 regions in North Korea was classified by eight groups. The last harvest date of group I, the south-west and south-east areas, was from October 21 to 29, which was the latest harvest date among the eight groups. It became shorter toward the central inland and mountainous areas of group IV, and it ranged from September 18 to October 2. The maximum number of growth days was 153~160 days in group I, and 100~111 days in group IV-3, the northernmost area of the east coast. Assuming total growth days as 110 days, the ranges of last flowering dates (and the day length) of group I, II, III, and IV were August 12~19 (day length of 13.5~13.8 h), August 2~6 (14-14.2 h), July 27~August 2 (14.2~14.4 h), and July 10~22 (14.5~14.8 h), respectively. The accumulative temperature of 110 growth days was above 2,400℃ in group II-1, the south to north area of the west inland, and above 2,300℃ in all regions except Cheongjin, Seonbong, and Jung-gang. The accumulative temperature calculated based on the maximum growth day was above 3,000℃ in group I and II-1 and above 2,500℃ in group II-2, the central area of the east coast, III-1, the central inland area, and IV-1, the central inland mountain area.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.4
• /
• pp.437-446
• /
• 2012

As a part of establishing suitability classification for forage production, use of the national soil and climate database was attempted for Italian ryegrass (Lolium multiflorum Lam., IRG) in Gangwon Province. The soil data base were from Heugtoram of the National Academy of Agricultural Science, and the climate data base were from the National Center for Agro-Meteorology, respectively. Soil physical properties including soil texture, drainage, slope available depth and surface rock contents, and soil chemical properties including soil acidity and salinity, organic matter content were selected as soil factors. The crieria and weighting factors of these elements were scored. Climate factors including average daily minimum temperature, average temperature from March to May, the number of days of which average temperature was higher than $5^{\circ}C$ from September to December, the number of days of precipitation and its amount from October to May of the following year were selected, and criteria and weighting factors were scored. The electronic maps were developed with these scores using the national data base of soil and climate. Based on soil scores, the area of Goseong, Sogcho, Gangreung, and Samcheog in east coastal region with gentle slope were classified as the possible and/or the proper area for IRG cultivation in Gangwon Province. The lands with gentle or moderate slope of Cheolwon, Yanggu, Chuncheon, Hweongseong, Pyungchang and Jeongsun in west side slope of Taebaeg mountains were classified as the possible and/or proper area as well. Based on climate score, the east coastal area of Goseong, Sogcho, Yangyang, Gangreung and Samcheog could be classified as the possible or proper area. Most area located on west side of the Taebaeg mountains were classified as not suitable for IRG production. In scattered area in Chuncheon and Weonju, where the scores exceeded 60, the IRG cultivation should be carefully managed for good production. For better application of electronic maps.