• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.603-620
• /
• 2021

A land nodal seismic system was employed to acquire seismic reflection data using stand-alone cable-free receivers in a land-river area. Acquiring reliable data using this technology is very cost effective, as it avoids topographic problems in the deployment and collection of receivers. The land nodal airgun system deployed on the mouth of the Hyungsan River (in Pohang, Gyeongsangbuk Province) used airgun sources in the river and receivers on the riverbank, with subparallel source and receiver lines, approximately 120 m-spaced. Seismic data collected on the riverbank are characterized by a low signal-to-noise (S/N) and inconsistent reflection events. Most of the events are represented by hyperbola in the field records, including direct waves, guided waves, air waves, and Scholte surface waves, in contrast to the straight lines in the data collected conventionally where source and receiver lines are coincident. The processing strategy included enhancing the signal behind the low-frequency large-amplitude noise with a cascaded application of bandpass and f-k filters for the attenuation of air waves. Static time delays caused by the cross-offset distance between sources and receivers are corrected, with a focus on mapping the shallow reflections obscured by guided wave and air wave noise. A new time-distance equation and curve for direct and air waves are suggested for the correction of the static time delay caused by the cross-offset between source and receiver. Investigation of the minimum cross-offset gathers shows well-aligned shallow reflections around 200 ms after time-shift correction. This time-delay static correction based on the direct wave is found essential to improving the data from parallel source and receiver lines. Data acquisition and processing strategies developed in this study for land nodal airgun seismic systems will be readily applicable to seismic data from land-sea areas when high-resolution signal data becomes available in the future for investigation of shallow gas reservoirs, faults, and engineering designs for the development of coastal areas.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.37-48
• /
• 2020

Eight colors prescribed by the Enforcement Rules of the Road Traffic Act and the group standard were tested to secure the minimum recursive reflectance performance standards when drying and wetting. The results were calculated to be 260.8 (mcd/㎡·lux) when drying white and 154.6 (mcd/㎡·lux) when wet. Yellow was 67% compared to the white reflective performance when drying. Wet poetry was 79 % and 59 %, respectively. In the case of blue, it was 64% in the case of white versus 72% in the case of white. Wet poetry was 63 % and 72 %, respectively. The range of changes in reflective performance during wetting was higher than when drying, and the absence of glass grains was similar to the previous results. The new colors also have a standard value of more than 50% compared to the white color in red, orange, pink, light green, and green. Based on this, it was estimated that the minimum reflective performance criteria according to the color of the road markings would form the basis for the enforcement rules of the Road Traffic Act.

• The Journal of the Korea Contents Association
• /
• v.21 no.10
• /
• pp.723-737
• /
• 2021

This study attempted to understand the meaning and nature of the drinking experience of participants participating in self-sufficiency program with alcohol problems. For this, data were collected by conducting in-depth interviews with seven problem drinkers currently participating in the self-support work project at the local self-support center. It was analyzed by a phenomenological analysis method. As a result of the study, 26 topics, 7 thematic vowels, and 3 categories were derived. The essential meaning of the study participant's drinking experience is as follows. It turned out to be 'a sense of accomplishment and belonging to job performance', 'extension of work life', 'maintaining social relations', 'weekly control drinking for self-support', 'minimum effort not to damage the working environment', 'self-criticism and reflection on absence from work resulting from heavy drinking', 'self-awareness of drinking problems. Through the analysis, the participants drank with a sense of accomplishment and a sense of belonging to job performance, and drinking was considered to extend their work life and maintain social relationships. At the same time, on weekdays when participating in self-support work projects, they we refrain from drinking in their own way and make minimal efforts not to interfere with the working environment under a hangover. The Absent from work due to heavy drinking led to self-reflection and furthermore, it was confirmed that they were aware of their problem drinking.

• Journal of Aerospace System Engineering
• /
• v.17 no.1
• /
• pp.42-50
• /
• 2023

In this study, hexagonal ferrite powder with chemical formula SrZn_2-xCo_xFe₁₆O₂₇ was synthesized by a solid-state reaction method and its electromagnetic (EM) wave absorption characteristics were evaluated in the frequency range of 0.1-18 GHz with absorber thickness range of 0 - 10 mm. Reflection loss (RL) affecting electromagnetic wave absorption performance was calculated based on the transmission line theory using measured complex permeabilities and permittivities. RL spectra were also directly measured for some samples. They were well matched with calculated results. High-frequency complex permeability characteristics were changed gradually according to the amount of Co substitution (x). The EM wave absorption frequency band could be tuned accordingly. Hexaferrite samples with x = 1.0, 1.25, and 1.5 exhibited remarkable maximum electromagnetic wave absorption performances with minimum RL (RL_min) lowered than -50 dB. They also showed a very broad frequency band (Δf > 10 GHz) in which more than 90% of the EM wave energy absorption occurred (RL ≤ -10 dB).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.294-302
• /
• 2023

Ni-Mn-Zn ferrite, Ni_0.5-xMn_xZn_0.5Fe₂O₄ (0 ≤ x ≤ 0.5), was synthesized using the sol-gel method to investigate the crystal structure, microstructure, magnetic properties, high-frequency characteristics, and electromagnetic (EM) wave absorption characteristics as a function of Mn substitution. As the Mn content increased, a continuous decrease in saturation magnetization (M_S) was observed with little change in coercivity (H_C). Samples for each composition (x) exhibited strong EM wave absorption performance with first and second strong EM wave absorption regions satisfying minimum reflection loss, RL_min < -40 dB in the 1.5~2.5, 6~11 GHz range, respectively. The EM wave absorption in Ni-Mn-Zn ferrite depends on magnetic loss, and adjusting µ' and µ'' spectra by Mn substitution or H field allows control of the EM wave absorption frequency.

• Fire Science and Engineering
• /
• v.28 no.3
• /
• pp.62-71
• /
• 2014

The importance of the firefighting education & Training is being magnified in order to enhance and strengthen a firefighters' ability and to reduce the firefighters' fatality and casualty. Therefore, It is needed to expand the facilities. In this study, with a comparative analysis of the global firefighting education & training facilities for fire suppression, we try to present the necessity and the basic contents of the establishing the installation criteria for the domestic firefighting education & training facilities. It has to contain specific purpose of the training and minimum standards for the structures with a guarantee of an international level. Naturally, the top priority is a safety of trainees and trainers. And, it should pay attention to a higher effectivity of the training course with a active reflection of the standard operation procedures' scenarios. Simultaneously, by securing a similarity and a compatibility to the other standards, it must maintain the balance of a whole standard.

• Journal of The Korean Astronomical Society
• /
• v.36 no.spc1
• /
• pp.83-91
• /
• 2003

There are terrestrial signatures of the solar activity cycle in ice core data (Ram & Stoltz 1999), but the variations in the sun's irradiance over the cycle seem too small to account for the signature (Lean 1997; Goode & Dziembowski 2003). Thus, one would expect that the signature must arise from an indirect effect(s) of solar activity. Such an indirect effect would be expected to manifest itself in the earth's reflectance. Further, the earth's climate depends directly on the albedo. Continuous observations of the earthshine have been carried out from Big Bear Solar Observatory since December 1998, with some more sporadic measurements made during the years 1994 and 1995. We have determined the annual albedos both from our observations and from simulations utilizing the Earth Radiation Budget Experiment (ERBE) scene model and various datasets for the cloud cover, as well as snow and ice cover. With these, we look for inter-annual and longer-term changes in the earth's total reflectance, or Bond albedo. We find that both our observations and simulations indicate that the albedo was significantly higher during 1994-1995 (activity minimum) than for the more recent period covering 1999-2001 (activity maximum). However, the sizes of the changes seem somewhat discrepant. Possible indirect solar influences on the earth's Bond albedo are discussed to emphasize that our earthshine data are already sufficiently precise to detect, if they occur, any meaningful changes in the earth's reflectance. Still greater precision will occur as we expand our single site observations to a global network.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.57-66
• /
• 2011

At this time, digital cameras are used in art and forensic science. However, the digital camera has some limitations which need to understand of photograph and lighting. It is a useful paper to make an infrared flatbed scanner. The following processes offer an infrared flatbed scanner development. First, the infrared flatbed scanner changes visible fluorescent lamp to infrared LED. Second, it equips a long-pass filter, which is available to pass over 810nm wavelength, on the glass to complete the optimal infrared flatbed scanner. In addition, it must copy from digital camera to computer directly. The infrared digital camera has disadvantage to always irradiate infrared lamp. Because of difference between visible length and infrared length characteristic, they have different focal distance. This devised scanner for solving mentioned problems does not need to irradiate infrared lamp, and there is not a problem about focal point because the depth of field of flatbed scanner is minimum 2mm. Lastly, the infrared flatbed scanner can make high resolution which is 12,800dpi unlike digital camera. Accordingly, the infrared scanner looks forward to be used in many field of study.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.4
• /
• pp.133-140
• /
• 2006

The growth characteristics and properties of large size $SrAlF_5$ single crystals are described and compared with those of $BaMgF_4$. Transmission spectra in the vacuum ultraviolet wavelength region indicate a high transparency of $SrAlF_5$ (about 90% without considering surface reflection loses) down to 150 nm, on contrast to the optical loses observed for $BaMgF_4$. The ferroelectric character of $SrAlF_5$ is evidenced by the reversal of the spontaneous polarization in a hysteresis loop. The higher potential of $SrAlF_5$ in comparison with $BaMgF_4$ for the realization of all-solid-state lasers in the ultraviolet wavelength region by the quasi-phase matching (QPM) technique is pointed out. $SrAlF_5$, besides a higher grade of transparency, shows a nonlinear effective coefficient similar to that of quartz and uniaxial nature, on contrast to the one order smaller nonlinear coefficient and biaxial character of $BaMgF_4$. The refractive index of $SrAlF_5$ from the ultraviolet to the near-infrared wavelength region is measured by the minimum deviation method. The Sellmeier and Cauchy coefficients are obtained from the fits to the curves of the ordinary and extraordinary refractive indices, and the grating period for the first order QPM is estimated as a function of the wavelength. The poling periodicity for 193 nm SHG from 386 nm is $4{\mu}m$.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.73-79
• /
• 2018

In this paper, TM(transverse magnetic) scattering problems by a conductive strip grating between a double dielectric layer are analyzed by applying the PMM(point matching method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, the scattered electromagnetic fields are expanded in a series of Floquet mode functions, and the conductive boundary condition is applied to analysis of the conductive strip. The most normalized reflected powers of the sharp variations in minimum values are scattered in direction of the other angles except incident angle. Generally, in the case of numerical analysis except for reflection and transmission power in free space, as the dielectric constants of the double dielectric layer increases, the reflected power increases and the transmitted power decreases relatively, respectively. The numerical results for the presented structure of this paper having a grounded double dielectric layer are shown in good agreement compared to those of the existing papers.