• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.3
• /
• pp.407-416
• /
• 1998

For fast Cholesky factorization, it is most important to reduce the number of nonzero elements by ordering methods. Generally, the minimum deficiency ordering produces less nonzero elements, but it is very slow. We propose an efficient implementation method. The minimum deficiency ordering requires much computations related to adjacent nodes. But, we reduce those computations by using indistinguishable nodes, the clique storage structures, and the explicit storage structures to compute deficiencies.

• Computers and Concrete
• /
• v.17 no.5
• /
• pp.673-692
• /
• 2016

In the standards, minimum reinforcement ratios are presented as the least reinforcement ratios that bearing elements should have in a way to include all systems and in general. However, naturally these general minimum ratios might be presented as being lower than the normally required reinforcement ratios by criteria such as system size, bearing system arrangement, section situation and distributions of the elements and earthquake effect. In this case, minimum reinforcement ratios may remain as meaningless restrictions. Then grouping the criterion that might affect reinforcement ratios according to certain parameters and creating minimum reinforcement ratios regarding preliminary design will provide ease and safety during the project designing. Moreover, it will enable fast and simple examinations in the beginning of project control and evaluation process. By means of the data which could be defined as "preliminary design & minimum reinforcement ratios", a more realistic and safe restriction compared to general minimum reinforcement ratios could be presented. As a result of numerous comprehensive studies, reinforcement ratios to include all certain systems might be obtained. Today, thanks to the development level of finite elements programs which can make reinforced concrete modelling, with the studies that are impossible to carry out beforehand, this deficiency in the minimum reinforcement ratios in the standarts may at least be partially made up with the advisory regulation of preliminary design & minimum reinforcement ratios. As the structure of the system to be examined and the diversity of the parameters range from the specific to the general, preliminary design & minimum reinforcement ratios will approximate to general minimum reinforcement ratios in real terms. By focusing on a more specific system structure and diversity of the parameters, preliminary design and even design reinforcement ratios will be approximated. In this preliminary study, a route between these two extremes was attempted to be followed. Today, it is possible to determine suggested practical ratios for project designs through carrying out numerous studies.

• KSTLE International Journal
• /
• v.10 no.1_2
• /
• pp.17-22
• /
• 2009

The numerical analysis of elastohydrodynamic lubrication for the ball and roller bearings is performed in order to study the effect of the number of rolling elements and the shaft load on the minimum film thickness. A finite difference method and the Newton-Raphson method are used in the analysis. For a given shaft load, the maximum load of rolling element is determined along with the number of rolling elements. And then the minimum film thickness is calculated for several rolling bearings. The shape of film thickness and the pressure distribution are also studied.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.130-137
• /
• 1999

The criteria for determining the elements are the minimum zone method(MZM) and the least squares method(LSM). The LSM is deterministic and simple but is limited at the measurements whose errors are significant compared with form errors. For the precise condition, minimum zone method(MZM) has been selected to determine the elements. It is not deterministic and nonlinear so that a optimizing procedure is needed. The Straightness is the fundamental problem in the evaluating form error. In this paper, a new approach adapting the genius education concept is proposed to obtain an accurate results for the minimum zone problem of the straightness. Its computational algorithm is studied on a set of randomly generated data. To be of almost no account of the specification(the number and the standard devistion etc.) of the sample data, the results shows excellent reliability and high accuracy in estimating the straightness.

• Journal of Climate Change Research
• /
• v.7 no.2
• /
• pp.205-215
• /
• 2016

The relationship between the climate and the number of heat-related patients in South Korea was analysed in this study. The number of the patients was 1,612 during the summer 2011 to 2015 according to the Heat-related Illness (HRI) surveillance system. The coefficient of determination between the number of the patients and the daily maximum temperature was higher than that between the number of them and the other elements: the daily mean/minimum temperature and relative humidity. The thresholds of daily maximum and minimum temperature in metropolitan cities (MC) were higher than those in regions except for MC (RMC). The higher the maximum and minimum temperature became, the more frequently the heat-related illness rate was observed. The regional difference of this rate was that the rate in RMC was higher than that in MC. Prolonged heat wave and tropical night tended to cause more patients, which continued for 20 days and 31 days of maximum values, respectively. On the other hand, the relative humidity was not proportional to the number of the patients which was rather decreasing at over 70% of relative humidity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.529-534
• /
• 1998

To find out an adequate failure criterion in two-dimensional linear elastic crack problems, finite element programs, SED, which determine stress intensity factors $K_I, K_{II}$, crack angle and peak load by the minimum strain energy density failure criterion were developed. In this program, the conventional quadratic isoparametric elements were used in all regions except the crack tip zone where triangular singular elements with 6 nodes were used. The results of SED were compared with the results of those which followed by the maximum circumferential tensile stress criteria and those by the maximum energy release rate criteria and those by Jenq and Shah`s experiments of the same geometry and material properties. The maximum energy release rate criteria were better close to those of the Jenq and Shah`s experiments than the maximum circumferential tensile stress criteria and the minimum strain energy density criteria.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.386-393
• /
• 2003

For fast Cholesky factorization, it is most important to reduce the number of non-zero elements by ordering methods. Minimum deficiency ordering produces less non-zero elements. However, since it is very slow. the minimum degree algorithm is widely used. To improve the computation time, Rothberg's AMF uses an approximate deficiency instead of computing the deficiency. In this paper we present simple efficient methods to obtain a good approximate deficiency using information related to cliques. Experimental results show that our proposed method produces better ordering quality than that of AMF.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.2
• /
• pp.38-45
• /
• 2011

The criteria for determining the elements are the minimum zone method(MZM) and the least squares method(LSM). The LSM is deterministic and simple but is limited at the measurements whose errors are significant compared with form errors. For the precise condition, minimum zone method(MZM) has been selected to determine the elements. The roundness is the fundamental problem in the evaluating form errors. In this paper, anew approach adapting the genius education concept is proposed to obtain an accurate results for the MZM and the LSM of the roundness. Its computational algorithm is studied on a set of measured sample data. To be of almost no account of the specification(the number and the standard deviation etc.) of the sanple data, the results shoqs excellent reliability and high accuracy in estimating the roundness.

• Journal of the Korean Institute of Rural Architecture
• /
• v.19 no.4
• /
• pp.77-85
• /
• 2017

In order to preserve beautiful coastal areas landscapes of Jeju Island's the landscape resource, Jeju Special Self-Governing Province is dedicated to protecting the landscape through legal regulations and deliberations. However, the Coastal Landscape of Jeju Island was continuously damaged by due to increased tourist and high development pressure. Based on buildings along the Coastal Road in Aeowal of Jeju Island, this study focused on Management Status of Coastal Areas Landscapes through the Analysis of Building Landscape Elements. As a result, 1) It was effective to limit the use and scale of buildings through legal regulations such as Use zoning. 2) The result of analysis on the physical landscape elements of buildings showed some of the them have the damage values despite passing the review of Architecture Committee. Therefore Landscape Policies required institutional maintenance. 3) As physical landscape Elements of buildings is a minimum quantitation criterion of not less than 1.5 for D/H, or less than a factor of $27^{\circ}$ for angle of elevation and not less than 7.8m for elevation blockage ratio was presented as a criterion for preventing damage to the minimum Coastal Landscape.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.2
• /
• pp.297-306
• /
• 1998

Photoelectric observations of the neglected eclipsing binary VZ Cep were made on four night during the observing season of 1984 at Sobaeksan Astronomy Observatory. The UBV light curves were secured incompletely with the gap in 0.35-0.75 phases. From the observations three times of minimum lights were determined in three band-passes, which formed one weighted minimum epoch (JD Hel 2446009.0453). With our observations, and improved light elements for VZ Cep is determined using all the photoelectric and CCD times of minimum lights published so far. The (O-C) resid-uals calculated with our light elements show small varying scatters which cannot be negligible. From the analyses of all the times of minima with the Scargle’s(1982)period-searching and a curve fitting methods, we found possible periodic oscillations of the (O-C) residuals with the period of 1. y26 and the amplitude of 0.d0032. These results, however, have to be considered as a preliminary values until complete analysis for the minimum lights of VZ Cep with enough observational data. Future observations of this binary system are urgently prompted.