• 한국통신학회논문지
• /
• 제19권3호
• /
• pp.418-424
• /
• 1994

GF(q2) 위의 Hermitian 함수체와 마찬가지로, q+1을 나누는 정수 s에 대해 y + y=x 로 정의되는 부분체들도 Hasse-Weil 한계식에 의해 허용되는 최대수의 1차 점들을 가지므로 최상이 된다. 본 논문에 서는 Hermitian 함수체의 이러한 부분체들로부터 생성되는 기하 Goppa 부호(혹은 대수기하부호)룰 연구한다. n을 부호장, m을 이들 부호의 차원과 최소거리를 결정하는 패러미터라 할때, n보다 작은 임의의 m에 대해 차원과 최소거리가 명확하면서도 완전하게 주어진다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1102-1107
• /
• 2000

The signals that can be obtained from a rotating machine often convey the information of machine. For example, if the machine under investigation has faults, then we can measure the signal which has a pulse train, embedded in noise. Therefore the ability to detect the fault signal in noise determines the degree of diagnosis level of rotating machine. In this paper, minimum variance cepstrum (MV cepstrum), which can easily detect impulse in noise, has been applied to detect the type of faults of ball bearing system. To test the performance of this technique, experiment has been performed for ball bearing elements that have man made faults. Results show that minimum variance cepstrum can easily detect the periodicity due to faults.

• Corrosion Science and Technology
• /
• 제3권6호
• /
• pp.257-261
• /
• 2004

Leaking of fuel gas in a building creates flammable atmosphere and gives rise to explosion. Observations from accidents suggest that some explosions are caused by quantity of gas significantly less than the lower explosion limit amount required to fill the whole confined space, which might be attributed to inhomogeneous mixing of the leaked gas. The minimum amount of leaked gas for explosion is highly dependent on the degree of mixing in the building. This paper proposes a method for estimating minimum amount of flammable gas for explosion assuming Gaussian distribution of flammable gas.

• 융합신호처리학회논문지
• /
• 제2권1호
• /
• pp.95-100
• /
• 2001

본 논문에서는 불확실성을 갖는 비선형 시스템에 제어기를 설계하기 위해서 출력제환 선형화 방법을 통하여 비선형 시스템을 선형시스템으로 변환하고 슬라이딩 모드 제어기법을 사용하여 파라미터들을 갱신하고 이를 통하여 제어입력을 갱신하는 강인성제어기를 제안하고자 한다. 비선형시스템은 최소 위상시스템이고, 시스템의 상대차수는 r＜n 이며, 제로 다이나믹스는 안정하다고 가정한다. 제안된 제어기에 대해서 대역적 점근적 안정도가 보장됨을 보였으며, 제안된 제어기에 대해서 컴퓨터 시뮬레이션을 통하여 타당성을 검증하였다.

• Design & Manufacturing
• /
• 제13권2호
• /
• pp.49-53
• /
• 2019

The temperature distribution and lifetime of molds were predicted by computer simulation analysis with various spraying and blowing process of high pressure die casting. After varying the spraying angle and time, the mold temperature, heat exchange and mold life were predicted. As the spraying angle increases, the maximum temperature of the mold decreases, which is because the spraying area increases and the heat exchange with the mold increases. Heat exchange occurs more actively in the blowing process than in the spraying process. This is because the cooling is not performed due to the steam generation. When the spraying angle is 50 degree, the minimum life of the mold is analyzed 200 times. After adjusting the blowing time from 5s to 3s, the minimum lifetime of the mold has been increased almost twice.

• Communications for Statistical Applications and Methods
• /
• 제30권4호
• /
• pp.411-421
• /
• 2023

This paper provides a new estimation equation based on the concept of a minimum distance between the empirical and theoretical distribution functions under the most widely used progressive Type-II censoring scheme. For illustrative purposes, simulated and real datasets from a three-parameter Weibull distribution are analyzed. For comparison, the most popular estimation methods, the maximum likelihood and maximum product of spacings estimation methods, are developed together. In the analysis of simulated datasets, the excellence of the provided estimation method is demonstrated through the degree of the estimation failure of the likelihood-based method, and its validity is demonstrated through the mean squared errors and biases of the estimators obtained from the provided estimation equation. In the analysis of the real dataset, two types of goodness-of-fit tests are performed on whether the observed dataset has the three-parameter Weibull distribution under the progressive Type-II censoring scheme, through which the performance of the new estimation equation provided is examined.

• Restorative Dentistry and Endodontics
• /
• 제49권2호
• /
• pp.21.1-21.8
• /
• 2024

Objectives: This paper aims to serve as a useful guide for sample size determination for various correlation analyses that are based on effect sizes and confidence interval width. Materials and Methods: Sample size determinations are calculated for Pearson's correlation, Spearman's rank correlation, and Kendall's Tau-b correlation. Examples of sample size statements and their justification are also included. Results: Using the same effect sizes, there are differences between the sample size determination of the 3 statistical tests. Based on an empirical calculation, a minimum sample size of 149 is usually adequate for performing both parametric and non-parametric correlation analysis to determine at least a moderate to an excellent degree of correlation with acceptable confidence interval width. Conclusions: Determining data assumption(s) is one of the challenges to offering a valid technique to estimate the required sample size for correlation analyses. Sample size tables are provided and these will help researchers to estimate a minimum sample size requirement based on correlation analyses.

• 한국안광학회지
• /
• 제18권1호
• /
• pp.19-25
• /
• 2013

목적: 일상생활에서의 조도 환경에 따라 써클 소프트콘택트렌즈의 착색부분에 의한 콘택트렌즈 착용자의 동공 가 려짐 정도를 확인하고 동공의 가려짐에 따른 시력 변화를 알아보고자 하였다. 방법: 20대 82안을 대상으로 비착색 부위가 렌즈 중심부 6.2 mm 직경인 써클 콘택트렌즈를 착용시키고 50 lx 및 370 lx의 조도에서 최소분리시력 및 최소가독시력을 측정하였다. 결과: 370 lx에서는 써클 콘택트렌즈 착용 시 착색부위에 의한 동공의 가려짐이 없었으나, 50 lx에서는 모든 실험대상안의 동공이 써클 콘택트렌즈에 의한 가려짐이 나타났으며 그 범위는 0.40~1.70 mm이었다. 50 lx에서는 써클 콘택트렌즈의 착용에 의해 최소가독시력 및 최소분리시력이 통계적으로 유의하게 감소하였으며, 동공 크기가 큰 실험대상안 일수록 시력의 감소 정도가 더 커지는 상관관계를 가짐을 확인할 수 있었다. 또한, 최소분리시력의 감소 정도가 최소가독시력의 경우보다 더 크게 나타나 동공의 가려짐에 의해 최소분리시력이 더 크게 영향을 받는 것을 알 수 있었다. 결론: 조도가 낮은 실내에서나 야간 활동 시의 써클 콘택트렌즈 착용은 시력에 직접적으로 영향을 끼칠 수 있으므로 이에 대한 착용자 및 제조사의 고려가 필요하다.

• 대한두개안면성형외과학회지
• /
• 제18권2호
• /
• pp.97-104
• /
• 2017

Background: Nasal bone fracture is one of the most common facial bone fracture types, and the surgical results exert a strong influence on the facial contour and patient satisfaction. Preventing secondary deformity and restoring the original bone state are the major goals of surgeons managing nasal bone fracture patients. In this study, a treatment algorithm was established by applying the modified open reduction technique and postoperative care for several years. Methods: This article is a retrospective chart review of 417 patients who had been received surgical treatment from 2014 to 2015. Using prepared questionnaires and visual analogue scale, several components (postoperative nasal contour; degree of pain; minor complications like dry mouth, sleep disturbance, swallowing difficulty, conversation difficulty, and headache; and degree of patient satisfaction) were evaluated. Results: The average scores for the postoperative nasal contour given by three experts, and the degree of patient satisfaction, were within the "satisfied" (4) to "very satisfied" (5) range (4.5, 4.6, 4.5, and 4.2, respectively). The postoperative degree of pain was sufficiently low that the patients needed only the minimum dose of painkiller. The scores for the minor complications (dry mouth, sleep disturbance, swallowing difficulty, conversation difficulty, headache) were relatively low (36.4, 40.8, 65.2, 32.3, and 34 out of the maximum score of 100, respectively). Conclusion: Satisfactory results were obtained through the algorithm-oriented management of nasal bone fracture. The degree of postoperative pain and minor complications were considerably low, and the degree of satisfaction with the nasal contour was high.

• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.305-315
• /
• 1986

본 연구에서는 가변 기통 엔진의 동특성을 규명하기 위해 세곳으로 지지되는 직렬 4기통 디이젤 엔진에 대한 3자유도 모델을 설정하였고, 이 모델에서 각 마운트의 위치와 경사각 및 방진고무의 크기를 변경시킬 때의 최적화 문제를 컴퓨터 시뮬레이션 으로 고찰하였다.