• Journal of the military operations research society of Korea
• /
• v.10 no.2
• /
• pp.61-73
• /
• 1984

A block replacement policy using items with different reliability is discussed. We divide system unit failure modes into two modes and use less reliable unit when operating unit fails near the planned preventive replacement time. In this policy, item A has two failure modes. Mode-1 failure is removed by minimal repair, mode-2 failure by replacement. If mode-2 failure of item A happens in (0, $T-{\delta}$), failure item A is replaced by new item A. If mode-2 failure of item A happens in ($T-{\delta}$, T), failure item A is replaced by new item B. Item B should be cheaper and less durable than item A. Under this policy, we determine the preventive replacement interval $T^{*}$ and the interval ${\delta}^{*}$ of item B replacement which minimize the cost rate per unit time.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.2
• /
• pp.37-46
• /
• 1996

This paper proposes a cost-effective solution to the synonym problem of virtual caches. In the proposed solution, a minimal hardware addition guarantees the correctness whereas the software counterpart helps improve the performance. The key to this proposed solution is an addition of a small physically-indexed cache called U-cache. The U-cache maintains the reverse translation information of the cache blocks that belong to unaligned virtual pages only, where aligned measns that the lower bits of the virtual page number match those of the corresponding physical page number. The page alignment is a simple software optimization to improve the performance of the U-cche hardware. With the combination of both hardware and software, the proposed solution reduces the hardware costs and minimizes software modification and performance degradation. Performance evaluation base on ATUM traces shows that a U-cache, with only a few entries, performs almost as well as fully-configured hardware-based solution when more than 95% of the pages are aligned.

• International Journal of High-Rise Buildings
• /
• v.1 no.1
• /
• pp.29-36
• /
• 2012

The diagrid structural system is considered to be not only the best structural system for constructing free form structures, but also a very effective system in resisting lateral load. As a newly investigated structural system, its complicated node has not yet been completely investigated and minimal experimentation of manufacturing and constructing the system have been conducted. Therefore, the constructing cost of the diagrid structural system is still comparatively high. In this paper, the cyclic performance of a diagrid node with an H-section brace will be discussed. Design details that consider productivity were proposed and their structural performances were assessed through experimental and analytical investigation.

• Korean Journal of Poultry Science
• /
• v.28 no.2
• /
• pp.165-172
• /
• 2001

Vaccination is one of the most important and cost-effective methods of preventing infectious diseases. Over the past decade, scientific in molecular biology and immunology have improved understanding of many diseases and led to the development of novel strategies for vaccination. An ideal vaccine would induce effective immunity specific for the type of infection, have long duration, require minimal or no boosters, have safety, would not induce adverse reaction, and be easy to administer. The desire to meet these criteria has resulted in the development of vaccines that do not depend on the use of the viable disease agent. It is not the intent of this review to give an extensive review of the field of vaccinology, but rather to address characteristics of conventional and genetically engineered vaccines.

• Journal of Industrial Technology
• /
• v.37 no.1
• /
• pp.5-11
• /
• 2017

The purpose of this research is to propose an efficient loop line operation plan for customer transportation in a new theme park. Based on the expected customer arrivals, customer loading/unloading methods, and scheduled/non-scheduled departure schemes, movement time between stations etc., we have performed indepth analyses and derived the best optimal policy. Our results show that, over all, the operation with separate loading/unloading doors and scheduled departure is preferred to the other options. We then derived the optimal number of trains and cars meeting minimal customer unsatisfaction with low cost for each season.

• ETRI Journal
• /
• v.6 no.3
• /
• pp.17-20
• /
• 1984

A block replacement policy using items with different reliability is discussed. We devide system unit failure modes into two modes and use less reliable unit when operating unit fails near the planned preventive replacement time. In this policy, item A has two failure modes. Mode-1 failure is removed by minimal repair, mode-2 failure by replacement. If mode-2 failure of item A happens in (0,T- $\delta$). failure item A is replaced by new item A. If mode-2 failure of item A happens in(T-$\delta$,T), failure item A is replaced by new item B. Item B should be cheaper and less durable than item A. Under this policy, we determine the preventive replacement interval T and the interval $\delta$ of item B replacement which minimize the cost rate per unit time.

• The Journal of the Korean dental association
• /
• v.38 no.1 s.368
• /
• pp.86-93
• /
• 2000

Water fluoridation in conjunstion with wide use of fluoride dentifrices has been a major factor responsible for the decline in dental caries during the second half of the 20th century throughout the world. The history of water of water fluoridation is a classic public health program leading to epidemiologic investigation and community-based public health dentistry program. Although other fluoride-containing products are available, water fluoridation remains as the most safe and cost-effective method of delivering fluoride to omost communities. regardless of age. educational attainment. or income levels,. This review deals with pros and cons of water fluoridation and prospective analysis of state-of-the-art on issues related to the use of fluoride. An "optimal" fluoride concentration of 0.7-1.2 ppm has been recommended for preventing dental caries with a minimal dental fluorosis and no systemic health consequences.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.269-274
• /
• 1998

This paper describes a scaled model for PWM thyristor current-source inverter with a commutation circuit. The system consists of a 6-pulse thyristor bridge and an LC resonant circuit with thyristor switches, which offers thyristors to have turn-off capability for PWM operation with minimal switching losses. The proposed system can be used as a reactive power compensator with PWM operation for the utilitity application. There would be two advantages in the proposed system over the existing voltage source inverter. One is the low system cost due to using the conventional thyristors. Another is easy expansion of system operation voltage because th series operation of thyristor devices is already proven in HVDC system.

• Communications for Statistical Applications and Methods
• /
• v.9 no.1
• /
• pp.21-31
• /
• 2002

This paper considers a Bayesian approach to determine an optimal replacement policy for a repairable system with warranty period. The mathematical formula of the expected cost rate per unit time is obtained for two cases : RFRW(renewing free-replacement warranty) and RPRW(renewing pro-rata warranty). When the failure time is Weibull distribution with uncertain parameters, a Bayesian approach is established to formally express and update the uncertain parameters for determining an optimal replacement policy. Some numerical examples are presented for illustrative purpose.

• The Korean Journal of Applied Statistics
• /
• v.15 no.1
• /
• pp.107-117
• /
• 2002

In this paper we present the optimal replacement policies following the expiration of combination warranty. We consider two types of combination warranty policies: renewing warranty and non-renewing warranty. The criterion used to determine the optimal replacement period is the expected cost rate per unit time from the user'perspective. The optimal maintenance period following the expiration of combination warranty is obtained. Some numerical examples are presented for illustrative purpose.