• Journal of Environmental Science International
• /
• v.11 no.3
• /
• pp.177-182
• /
• 2002

A biosurfactant-producing microorganism was isolated from activated sludge by enrichment culture when grown on a minimal salt medium containing n-hexadecane as a sole carbon source. This microorganism was identified as Pseudomonas sp. and it was named Pseudomonas sp. EL-G527. It's optimal culture condition is 2% n-hexadecane, 0.2% NH$_4$NO$_3$, 0.3% KH$_2$PO$_4$, 0.3% $K_2$HPO$_4$, 0.02% MgSO$_4$ㆍ7$H_2O$, 0.0025% CaCk$_2$ㆍ6$H_2O$, 0.0015% FeSO$_4$ㆍ7$H_2O$ in 1$\ell$ distilled water and initial pH 7.0. Cultivation was initiated with a 2% inoculum obtained from starter cultures grown in 30 $m\ell$ of the same medium in 250 $m\ell$ flask. They were cultivated at 3$0^{\circ}C$ in reciprocal shaking incubator and the highest biosurfactant production was observed after 4 days.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.29-37
• /
• 2005

This paper presents a tuning-free conditional integration anti-windup strategy for induction machine with Proportional-Integral(PI) type speed controller. The on/off condition of integral action is determined by the frequency domain analysis of machine torque command without a prior knowledge of set-point changes. There are no tuning parameters to be selected by users for anti-windup scheme. In addition, the dynamic performance of the proposed scheme assures a desired tracking response curve with minimal oscillation and settling time even in the change of operating conditions. This algorithm is useful in many high performance induction machine applications not to allow the oscillation and overshoot of speed/torque responses. The main idea can be extended to general applications such as chemical processes and industrial robots.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.552-556
• /
• 2004

This paper surveys the design of the adaptive information filtering agents to retrieve the useful information within a large scale database. As the information retrieval through the Internet is generalized, it is necessary to extract the useful information satisfied the user's request condition to reduce the seeking time. For the first, this module is designed by the Rough reduct to generate the reduced minimal knowledge database considered the users natural query language in a large scale knowledge database, and also it is executed the soft computing by the fuzzy composite processing to operate the uncertain value of the reduced schema domain.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.929-931
• /
• 1993

The design sensitivity analysis based on the finite element method is presented for the eddy current problem with a voltage source. Since, in this problem, the complex variable is used as the state variable, new approach to the sensitivity calculation for the complex variable system is required. Its result is applied to the design of the rotor slot shape of squirrel cage induction motor. As a analysis model, only one slot pitch of rotor is analyzed by using a Periodic boundary condition. The use of this minimal modelling method leads to much saving of calculation time. The design objective is to obtain the desired slip-torque characteristic. Because the shape of rotor slot has much influence on the slip torque characteristic, the design variables are taken on the interface shape between rotor core and rotor bar. The initial shape of rotor slot is the trapezoidal type with rounding corners. The obtained final shape is quite similar to the double squirrel cage type.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.2
• /
• pp.207-214
• /
• 2009

This study examines the optimum filtration conditions in pretreatment of seawater desalination by reverse osmosis. For this purpose, Masan bay seawater is treated through a gravity filter column while $FeCl_3$ is added as coagulant. The conditions of coagulantd osage, media depth, filtration rate, and backwash time are evaluated. The study results show that the filtrate quality improved with increasing coagulant dosage, but head loss rapidly increased. After 4mg/L, the unit filter run volume reduced to less than $200m^3/m^2$. Considering the head loss development, 4mg/L is determined as the optimum dosage. The better filtrate qualities are obtained with depth of 100cm than that of 80cm. The two stage filtration, which outperformed the single stage filtration, is suggested for treatment of Masan bay. The filtration rate of 5m/h is decided as the optimum condition considering the head loss development. At 10m/h, the filtrate quality deteriorated even though the extent was minimal, and head loss increased rapidly. The backwash time of 10 min is decided appropriate.

• Journal of Fashion Business
• /
• v.9 no.6
• /
• pp.29-38
• /
• 2005

Natural dyes have attracted the worldwide attention because of its environmental advantage over synthetic dyes. However, most of natural dyes are expensive for mass production, strongly season and source dependent, and hard to store. In this study, coffee waste were used as natural dye to create beautiful colors. Coffee waste is inexpensive and easy to store, and provides a comparatively regular quality regardless of seasonand source. The effects of mordant agent concentration and mordanting temperature on dyeing efficiency of silk fabrics were investigated. Coffee extract dyed silk showed brilliant colors, and the colors were different with the kind of mordants. Cu, Sn, and Al mordanted silks showed golden yellow with subtle change of hue and value, while Fe mordanted silk showed a brownish green color. The increase in mordant concentration did not always increase the dyeability, and 0.5% o.w.f. mordant concentration was enough to get a satifactory result. Mordanting temperature also had little effect on the dyeability in case of Al, Cu, and Sn mordanted fabrics. Only Fe mordanted fabrics showed a better dyeability in the increase in mordating temperature. Coffee extract dyeing is an effective way using waste as resource and can create brilliant colors with minimal amount of mordant and under mild mordanting condition.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.212-217
• /
• 2021

Premature contraction arrhythmia is the most common disease among arrhythmia and it may cause serious situations such as ventricular fibrillation and ventricular tachycardia. Most of arrhythmia clasification methods have been developed with the primary objective of the high detection performance without taking into account the computational complexity. Also, personalized difference of ECG signal exist, performance degradation occurs because of carrying out diagnosis by general classification rule. Therefore it is necessary to design efficient method that classifies arrhythmia by analyzing the persons's physical condition and decreases computational cost by accurately detecting minimal feature point based on only QRS features. We propose method for personalized specific classification of premature contraction arrhythmia based on QRS features in smart healthcare environments. For this purpose, we detected R wave through the preprocessing method and SOM and selected abnormal signal sets.. Also, we developed algorithm to classify premature contraction arrhythmia using QRS pattern, RR interval, threshold for amplitude of R wave. The performance of R wave detection, Premature ventricular contraction classification is evaluated by using of MIT-BIH arrhythmia database that included over 30 PVC(Premature Ventricular Contraction) and PAC(Premature Atrial Contraction). The achieved scores indicate the average of 98.24% in R wave detection and the rate of 97.31% in Premature ventricular contraction classification.

• Tribology and Lubricants
• /
• v.36 no.6
• /
• pp.324-331
• /
• 2020

Wedging in a frictional elastic system is defined if the state of stick exists after the external loading on the system is removed. This paper presents a method to determine the critical coefficient of wedging for an elastic frictional system by considering the separation state. Wedging is always possible if the coefficient of friction exceeds a critical value known as the critical wedging coefficient. This method requires two concepts: a necessary and sufficient condition for wedging, which can be interpreted as positive spanning sets of constraint vectors existing in the wedged system, and the minimal positive basis that enables a minimum wedging coefficient. The algorithm based on the positive spanning concept is repeatedly executed after eliminating nodes from the contact stiffness matrix, for which the separation states are impending. The simulation results show that once a node enters the separation state, it never returns to the contact state again and the critical wedging coefficient reduces during repeated algorithm execution. The benefit of this method is that the computation time permits handling models with large numbers of contact nodes. The algorithm can also numerically find the critical wedging coefficient, thereby contributing to fastening and assembly performance improvements in mechanical systems.

• Tribology and Lubricants
• /
• v.36 no.6
• /
• pp.342-349
• /
• 2020

The rapidly increasing threats to the environmental has increased the demand for biodegradable lubricants. Vegetable oils, such as olive, coconut, and sunflower oils, are readily obtainable and are not harmful, unlike synthetic and mineral oils. The tribological characteristics of these oils should be adequately examined for industrial applications. In this study, the lubrication characteristics of olive oil is investigated using a pin-on-disk-type tribometer under 500 gf of normal force, and the examination results are compared and analyzed with those of commercial synthetic lubricants for friction and wear. In addition, stearic acid, which is a type of saturated fatty acid, is mixed with olive oil as an additive to improve its lubrication characteristics. Olive oil with stearic acid additive is thus observed to exhibit the lowest friction coefficient for rotational speeds of 200 to 800 rpm. According to the wear analysis, a minimal amount of wear is observed when no additive is used. Hence, olive oil is able to effectively reduce friction and wear at relatively low speeds. These low friction and wear characteristics of olive oil are attributed to its compatibility with the substrate.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.3
• /
• pp.379-386
• /
• 2022

The goal of this research is to verify a performance test system for a low speed, high torque, and harsh reducer at low cost. The reducer rotates a cooling fan with a diameter of 10 meters, in a high temperature (50℃) cooling tower in a geothermal power plant. It requires about 500 kgf·m torque and 47.75 kW power to rotate the fan at a maximum power condition. An expensive dynamometer is commonly used for performance test of a motor or a reducer. In this paper, a low cost system is developed using a hydraulic pump as a load unit to generate torque instead of a dynamometer. We accurately calculated the required power, the flow meter, and the pressure of the pump, and selected to design and optimize the system at minimal cost. The system also applied another reverse reducer and a gearbox to increase the rotational speed and to reduce the torque from the low speed and high torque target reducer. This allows low-cost systems to be built using inexpensive components. The developed system was able to successfully measure the high torque and the low rotational speed of the target reducer at high temperature.